Sykes Hollow Innovations, Ltd.
- Home
- Companies
- Sykes Hollow Innovations, Ltd.
- Products
- Sykes - Pipe Heating Cable
Sykes - Pipe Heating Cable
Prevents frozen water pipes to -50ºF. Simply wrap on, insulate and plug in. Engineered for use on metal and rigid plastic pipes. Uses an exclusive Press-To-Test™ button so you can test the cable before installing. A built-in thermostat turns the cable on at 38ºF. Proven low-wattage design uses up to 65 percent less energy at 2 watts a foot vs. other cables at 7 watts a foot, and protects to -50ºF. An exclusive power sensor light glows when the thermostat is closed. Each package contains one ready-to-install pipe heating cable along with installation instructions.
Most popular related searches
- Ultraviolet-proof outer cap protects hose from long-term sun damage.
- 180º swivel bracket mount for ease of use in all directions.
- Auto-rewind made from self lubricating materials to ensure smooth rewind.
- Includes a 50-foot high-quality PVC hose, pre-installed.
- One year limited warranty.
IMPORTANT:This hose is for normal farm and garden use and light commercial use only.
(5/8" inner diameter of hose)
- Screw the female end of the 5-foot source hose onto your faucet or spigot. Make sure the washer is in place inside the female coupling.
- Auto-rewind works best when hose is pulled slowly and locks into desired length automatically. You will hear several clicks while you pull which indicate the hose will not rewind.
- To return the hose to the Auto-Rewind Hose Reel enclosure, give the hose a short tug of approximately 12-18 inches and it will automatically retract into the PIRIT Auto-Rewind Hose Reel.
- Guide the hose smoothly back into the hose reel to prevent kinking.
- DO NOT pull or tug the hose with excessive force as this may damage the fittings, rewind system or electronic components.