- Home
- Companies
- TAM International, Inc.
- Products
- TAM FREECAP - Swellable Packers
TAM FREECAP - Swellable Packers
FREECAP I packers are made by bonding the swellable elastomer to any oilfield tubulars. They are offered in standard sizes of 3 to 20 ft (1 to 6 m) lengths on 10 to 30 ft (3 to 9 m) casing or tubing joints. Metal end rings assist in increasing the differential pressure rating by reducing the extrusion gap between the packer and the borehole/casing ID. Custom designed FREECAPs with modified sizes and compounds are available.
FREECAP II
The ID of the FREECAP II packer is designed to slide over the maximum API casing OD tolerance. Seals installed in both end rings seal the annulus between the ID of the packer and the OD of the casing. FREECAP II packers are commonly sized in 1 and 3 ft (0.3 and 1 m) lengths. They are simple to install and do not require specialized personnel to run them.
Smart FREECAP
The Smart FREECAP packer uses the basics of a FREECAP I packer but is manufactured to allow running control lines through the elastomer.
- Provides greatest expansion capabilities
- 7000 psi in eccentric horizontal application
- Anchoring capabilities up to 125 tonnes+
- Temperature ratings to 160°C/320°F
- Zonal Isolation
- Flow Diversion
- Stimulation
- Intelligent Wells
- Water/Gas Shut-Off
- Fracturing
- Cement Enhancement
- Selective Production
- Each swellable elastomer type packer sold by TAM is custom designed and tested.