TanDelta - Model OQSEx-G2 -ATEX Certified Real Time Oil Condition Analysis Sensor

• FULL SPECTRUM HOLISTIC (FSH™) - Detects all and any wear and contamination: water, acid, fuel, viscosity, different oil types, carbon, particles etc.
• EXTREMELY SENSITIVE - Certified detection and measurement sensitivity of 0.001%. Even the smallest change is detected enabling early detection of issues before equipment damage.
• REAL-TIME - Continuously analyses oil condition on operating equipment and reports oil condition every two seconds.
• ROBUST & RELIABLE - Quality engineered from AISI304 stainless steel. IP67 rated, suitable for deployment on any equipment including ATEX Zone 2.
• FULLY CERTIFIED - The OQSEx-G2 is fully certified, ATEX approval to BS EN 60079-0: 2012 and BS EN 60079-11:2013 Ex ic IIA T3 Gc.

PRODUCT INFORMATION

• Name : ATEX Oil Quality Sensor
• Product Number : OQSExG2-1-DD-02-5

PHYSICAL

• Material : Stainless Steel AISI304
• Dimensions : 118mm x 46mm (L x W)
• Weight : 160g
• Connection : 32mm AF Hex Collar
• Torque : 25N m

AVAILABLE THREADS

• Thread : Seal
• 1/2” BSPP : Dowty Type
• 1/2” NPT : n/a
• 7/8” UNF : ‘O’ Ring
• M18 : Dowty Type (Alternative threads available upon request)

ELECTRICAL

• Supply : +9-30 V DC
• Consumption : 0.4w Average

DATA OUTPUT / INPUT

• Digital Output : RS485, CANBus
• Protocols Supported : Modbus, CANOpen and J1939

OIL QUALITY DETECTION PARAMETERS

• Frequency : Every 2 seconds
• Output : Tan Delta Number (TDN)
• Oil Temperature (°C or °F)
• Accuracy : +/-1%
• Elements : All wear and contamination

OIL TYPE

• Configuration : Any mineral, semi-synthetic or synthetic oil, including fuels (diesel & bio-diesel)

ENVIRONMENTAL

• Calibrated Temperature : -20°C (-4°F) to +120°C (+248°F)
• Operating Temperature : -40°C (-40°F) to +120°C (+248°F)
• Fluid Temperature : -40°C (-40°F) to +120oC (+248°F)
• Fluid Pressure : up to 70 bar (1015 psi)
• Storage Temperature : -55°C (-67°F) to +150°C (+302°F)

STANDARDS & CERTIFICATION

• Water & Dust : IP67 when connected
• Shock & Vibration : BS EN 60068-2-30 (Test Db - Cyc.Hum.)
• BS EN 60068-2-6 (Test Fc - Sine Vib.)
• BS EN 60068-2-27 (Test Ea - Mech. Shock)
• EMC : EN 61000-6-4:2007 (Generic Emissions Standard for Industrial Environments)
• EN 61000-6-2:2005 (Generic Immunity Standard for Industrial Environments)
• ATEX : Zone II approval to BS EN 60079-0: 2012 and BS EN 60079-11:2013 Ex ic IIA T3 Gc
• Conformity : CE Marked
• RoHS Compliant