Tango - Model TX1 -Single Gas Detector

Increased audible alarms

The Tango has been designed to ensure it can be heard in even the noisiest of environments, equipped with a 100dB alarm the Tango can be heard above heavy machinery.

Extended Battery Life

Using lithium batteries the Tango has the capability to operate continuously in an “always-on” mode for three years

Improve Worker Safety

DualSense Technology ensures that regardless of your current bump test policy, you will be significantly safer with the Tango TX1 than any other detector on the market.

• The Tango TX1 alarms at 100dB at 10cm making it twice the volume of the GasBadge units and louder than any single gas instrument on the market
• Powered by one replaceable 2/3 AA lithium battery that will power it continuously for up to three years even if the instrument is being used in the optional “always on” mode.
• With 96 hours or less of instrument life remaining, the detector will produce an audible “chirp” and a visual flash indication
• Three-year instrument warranty, three-year carbon CO and H2S sensor warranty, and two-year warranty on the SO2 and NO2 sensors
• The Tango is compatible with iNet®, Industrial Scientific’s Gas Detection as a Service solution
• Its revolutionary patent pending DualSense Technology includes two of the same type sensor for the detection of a single gas

The Tango TX1 with DualSense Technology ensures that users will be significantly safer.

A three-year runtime and patent pending DualSense Technology increases worker safety, regardless of bump test frequency, while reducing overall maintenance costs

DualSense Technology includes two of the same type sensor for the detection of a single gas. The two sensor readings are processed through a proprietary algorithm and displayed as a single reading to the user.

DualSense Technology was developed to address the major challenge of making sure workers are always using fully functioning, reliable instruments in the field. Until Tango, that required a bump test of the instrument before each day’s use. With Tango’s DualSense Technology, workers are exponentially safer regardless of bump test frequency.

• Carbon Monoxide (CO)
• Hydrogen Sulphide (H2S)
• Nitrogen Dioxide (NO2)
• Sulphur Dioxide (SO2)

Gas Ranges

• Carbon Monoxide (CO): 0 to 1,000 ppm in 1.0 ppm increments
• Hydrogen Sulphide (H2S): 0 to 200 ppm in 0.1 ppm increments
• Nitrogen Dioxide (NO2): 0 to 150 ppm in 0.1 ppm increments
• Sulpur Dioxide (SO2): 0 to 150 ppm in 0.1 ppm increments

Physical

• Dimensions: 99 x 51 x 35 mm (3.9” x 2.0” x 1.4”)
• Weight: 126.0 g (4.4 oz.)
• Case top: Polycarbonate with a protective rubber
• Case bottom: Conductive polycarbonate

Power

• 3.6 V Primary lithium-thionyl chloride (Li-SOCl2), 1.5Ah, 2/3AA, replaceable & non-rechargeable

Alarms

• Audible alarm: 100 decibel (dB) audible alarm at a distance of 10 cm (3.94”)
• Visual alarm: Three strobe-emitting visual alarm LEDs (two red; one blue)
• Vibrating alarm: Standard

Performance

• Operating temperature range: –20°C to +50°C (-4°F to +122°F)
• Operating humidity range: 15%-95% Non-condensing (continuous)

Approvals

• ATEX: Ex ia I Ma, Ex ia IIC T4 Ga, Equipment Group and Category: I M1 and II 1G
• IECEx :Ex ia I Ma Ex ia IIC T4 Ga
• UL (C-US): Class I, Groups A, B, C, and D; Class II, Groups E, F, and G; T4; Exia Class I, Zone 0, AEx ia IIC T4