Komax EasyContrast - Model M1650 -Tube Marking System
The M1650 tube marking module prints marker tubes and pushes them onto the wire. The module is designed for machines in the new Zeta 6x0 range. In contrast to many stand-alone solutions, the M1650 Tube can be fully integrated into fully automatic wire harness production such as with the automatic Zeta wire processing machines. This integration and the change of thermal transfer ribbon and tubing material in less than five minutes saves a lot of time and ensures the highest quality. The M1650 tube marking system can be used to process flat, oval and round tube types. As a further advantage of tube labeling, the lettering can be rotated and moved to guarantee legibility. This is particularly advantageous in control cabinet construction when wires need to be shortened and markings need to be aligned forward. Thanks to the thermal transfer printing process, high abrasion resistance is also ensured.
Reliable color marking with thermal transfer marking unit
Tube marking offers high abrasion resistance thanks to the thermal transfer marking process. High contrast for clear legibility is provided regardless of the conductor color.
The identification hose is inscribed, cut and then pushed onto a mandrel where the gripper takes over.
The tube is prepared by the grippers for pushing onto the wire. Finally, the tube is pushed over the wire via the gripper unit with a funnel.
M1650 Tube
Metric
- Wire cross section min. (effective specs according to application sets, whole range may need several application sets): 0.5 mm²
- Wire cross section max. (effective specs according to application sets, whole range may need several application sets): 6 mm²
- Cycle time: 1.9 sec./tube
- Tube length Zeta 6x0 (depending on tube material and insertion position of terminal) min.: 15 mm
- Tube length Zeta 6x0 (depending on tube material and insertion position of terminal) max.: 35 mm
- Tube length Omega 7xx (depending on tube material and insertion position of terminal) min.: 15 mm
- Tube length Omega 7xx (depending on tube material and insertion position of terminal) max.: 27 mm
- Printer resolution: 300 dpi
- Tube roll diameter max.: 500 mm
- Tube roll width max.: 130 mm
- Tube roll core diameter max.: 20 mm
- Wire length min.: 240 mm
- Printer type: Thermal transfer
- Tube width max.: 12 mm
- Connection options: Zeta 6x0, Omega 7xx
- Electrical connection: 24 VDC-1A, 48 VDC-2A, 1×230 VAC-1A (200 VA)
- Compressed-air connection: 6 – 8 bar
- Weight: 28 kg
- Dimensions/depth: 717 mm
- Dimensions/width: 190 mm
- Dimensions/height: 739 mm
- Humidity, non-condensing: 85 %
- Temperature operation: 5-40 °C
Imperial
- Wire cross section min. (effective specs according to application sets, whole range may need several application sets): AWG20
- Wire cross section max. (effective specs according to application sets, whole range may need several application sets): AWG10
- Cycle time: 1.9 sec./tube
- Tube length Zeta 6x0 (depending on tube material and insertion position of terminal) min.: 0.39 in
- Tube length Zeta 6x0 (depending on tube material and insertion position of terminal) max.: 1.37 in
- Tube length Omega 7xx (depending on tube material and insertion position of terminal) min.: 0.39 in
- Tube length Omega 7xx (depending on tube material and insertion position of terminal) max.: 1.06 in
- Printer resolution: 300 dpi
- Tube roll diameter max.: 19.6 in
- Tube roll width max.: 5.1 in
- Tube roll core diameter max.: 0.79 in
- Wire length min.: 9.44 in
- Printer type: Thermal transfer
- Tube width max.: 0.47 in
- Connection options: Zeta 6x0, Omega 7xx
- Electrical connection: 24 VDC-1A, 48 VDC-2A, 1×230 VAC-1A (200 VA)
- Compressed-air connection: 87 – 116 psi
- Weight: 62 lb
- Dimensions/depth: 28.2 in
- Dimensions/width: 7.5 in
- Dimensions/height: 29.1 in
- Humidity, non-condensing: 85 %
- Temperature operation: 41 - 104 °F