GWT - Ultra Filtration System

• Excellent filtration performance with ability to achieve high flux rates with minimized fouling
• High temperature tolerance and chemical resilience to provide effective membrane cleaning
• Very fine nominal pore diameter (0.02 fim) filtration performance
• Low fouling membrane modules reduces cleaning frequency
• Excellent removal efficiency ofTSS, turbidity, trace oil/grease, and microbiological contamination
• Can be periodically back washed to extend operating life by removing the fouling layer on the UF membrane surface.
• Modular, compact systems are easy to install to minimize the associated civil construction costs.
• Available in two system configurations (outside-in or inside-out) that are chosen based upon the water analysis of the feed water to optimize system performance and reduce operating costs.
• Intelligent PLC Operation with HMI

Optional Features:

• Optional Features: Clean In Place System (CIP) Prefreatment Systems (Based on Specific Application)

System Crating

Inlet Feed Water Specifications:

• Feed Water TSS: Max. 300 NTUSurface Water /1000 NTU(Wastewater Reuse)
• Optimum Water Temperature: 65F-85F 08-30 C)
• pH range; 3-11
• Hardness: > 1 Grain Per Gallon requires pretreatment
• Chlorine Tolerance: 200ppmfor cleaning cycles
• Max. Pressure: 75psi (5 bar), 20psi (1.38 bar) transmembrane pressure
• Power: 220/460V/3ph/60hz or 220/400v/3ph/50hz

• Municipal Drinking Water for Surface Water & Well Water Treatment
• Seawater Desalination Pretreatment
• Greywater Reuse
• Tertiary Wastewater Reuse (Municipal Industrial)

GWT® series Ultrafiltration systems are custom designed and fabricated modular systems, built in accordance with the clients feed water source and flow rate requirements.