Chiko - Model CHP-5000AT3-DSA-UD -Ultra-High Pressure Laser Clean Dust Collector

Incorporates new “UD” feature
During maintenance of the primary filter chamber, the upper section of the chamber (pulse chamber / blower control chamber) can be lifted or lowered manually. The primary filter chamber can be easily removed.

Dust tray
The up/down lift mechanism makes it easy to attach and remove the dust tray.Casters attached with the dust tray makes it convencient to remove without any effort.It is then easy to dispose of the dust and to replace the zeolite.

Large inspection window
You can check the zeolite scattering status, the effective-ness of the pulse jet in removing dust, the suction status, and the condition of the filter through this window.

Remote cable

(sold separately/model: Using MT-173-8 (3 m) enables remote operation of peripheral equipment.

1. Operation input signal
2. Operation pressure signal (DC1-5V)
3. Filter clogging signal
4. Remote-control operation switching input signal
5. Operating signal
6. Abnormality signal
7. Change of operating level input signal (DC0-5V)
8. Gnd

The zeolite is pre-coated by a proprietary scattering mechanism.

Primary filter
Long filter life is achieved even during the collection of fine dust and viscous fumes caused by laser processing.
Dust peeling properties improved with teflon filter.

Airborne fumes and dust particles are sucked in by the suction blower, stirred up with zeolite from the scattering port then laminated on the filter as the zeolite is activated.

Filter cleaning function [Pulse type]

We have installed a proprietary continuous pulse air (compressed air) cleaning function.

Blower
Equipped with a relief valve. Operates when a specified pressure level is exceeded to protect the blower from overheating.

Activated carbon
Deodorizing activated carbon can be installed as an option.