Thincke Electronic Technology Co., Ltd.

ThinckeUltrasonic Fuel Tank Level Sensor

SHARE

The Ultrasonic Fuel Tank Level Sensor is a device used to monitor the fuel level in truck fuel tanks.

Most popular related searches
  • Anti fuel theft for vehicle, Perfect Solution to Prevent Fuel Theft, Diesel Tank, etc.
  • Non-invasive level measurement.
  • Suitable for various types of fuel tanks.
  • Available in Android and iOS Mobile App.
  • The sensor is attached to the bottom of the fuel tank by magnets.
More about Ultrasonic Fuel Tank Level Sensor
The sensor works independent of the vehicle electronics, therefore it can detect and report a fuel theft in real-time by sending an alert even when the vehicle is switched off.
  • No drilling or modification to the tank is required.
  • Draining of the tank fuel is not required.
  • No parts are placed inside the tank, No moving parts.
  • No calibration is required by the end-user
  • The device can be removed and placed onto a different tank (no permanent installation).
  • The device can detect the position of the tank.
  • Comartment separators prior to installation.
Ultrasonic Fuel Tank Level Sensor solves the problem of how to measure the remaining liquid level of Fuel Tank

The external type liquid level gauge uses sonar ranging principle, uses the special probe outside the container wall to collect ultrasonic signal, takes the special ultrasonic processing technology as the system core, uses the advanced high-speed signal processing technology, uses the special algorithm to accurately calculate the liquid level in the Fuel tank.
The calculated liquid level value is displayed locally and the remote signal is output.
The device can output the measurement results to the control system throughRS232, RS-485, and other interfaces. At the same time, the data can also be sent through wireless transmission to the Internet through BLE, GPRS, and NBIOT.
When measuring the liquid level, the ultrasonic signal is emitted from the probe, and the echo signal is detected by the probe after reflecting back from the liquid surface. It truly realizes external non-contact measurement of liquid level.
The echo signal is processed by a proprietary algorithm to calculate the time, and the system calculates the liquid level height according to the formula.

  • Maximum depth 1.5m
  • Minimum depth 3m
  • Absolute accuracy 3m
  • Relative accuracy 1 mm
  • External power supply 9-30 V
  • Internal battery 3.7 V, 1000 mAh
  • Maximum depth 1.5m
  • Waterproofing IP67
  • Signal output RS485, CAN, GPRS, Wireless Output is Optional