- Home
- Equipment
Show results for
Refine by
Environmental Equipment & Supplies
29 equipment items found
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
Installed in a channel in which flows the water to be cleaned, the screen consists of a set of rectangular screening mesh panels carried by two endless chains. The panels travel up and down again between an upstream wall plate and a downstream partition with a central, outlet aperture set across the ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
Installed across a channel in which the water to be cleaned flows through. The screen consists of a set of rectangular screening mesh panels, carried by two endless chains. The downstream panels travel down into the water, around the bottom and up again along the upstream side. The water flows across the upstream and then the downstream panels. The debris are arrested on the upstream face. The ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
Installed in a channel in which the water to be cleaned flows, the screen consists of a set of rectangular screening mesh panels carried by two endless chains. The panels travel up and down again between an upstream partition set across the channel, with an inlet central aperture and a downstream wall set across the channel. The water enters through the aperture in the upstream partition, flows ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
The drum screen is installed in a concrete chamber between two parallel side walls with large apertures. The drum consists of a cylindrical rotor with a cylindrical surface made of side-by-side rectangular mesh panels. The rotor has two bearings and a drive at deck level. The panels travel down into the water. The water flows into the inside of the drum screen via the two side-wall apertures and ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
This plate-mounted, self-supporting drum screen is used to screen small or medium flows of water for industrial or water-treatment plants It is a fully standardised design and is not designed to be customized. It is meant for sites with little or no water level ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
This feeds the backwash spray-water pipes of the rotating ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
The wash-water and debris from the screens run in a deck flume and reach the debris collection ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
The debris filter backwash water flow is rather high compared to that of rotating screens and the water returns under pressure to the condenser outfall ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
BEAUDREY supplies and installs the necessary control cabinets for its supply. BEAUDREY can meet any customer-imposed standard for instruments, computers and ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
There are two main types of cathodic protection systems BEAUDREY can ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
As shells and marine life tend to grow in the grouted stoplog guides, BEAUDREY can supply a heavy guide scraper frame which is lowered into the guides. Its blades scrape off the shells and growth which have adhered to the surface. After having used the scraper, gate lowering and sealing capacity are much ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
By-pass valves are an optional feature for drum screens and all types of travelling band screens (except for the thru-flow ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
The bar rack is installed across the pit. The rake is normally parked in its top position above deck. The comb is disengaged from the bar rack. When a signal is received, the rake travels downwards, directed by the wall guides. On reaching the bottom, the rake tilts from its open position to its raking position. The rake tines penetrate between the bars of the rack. The rake travels up-wards ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
A penstock is a small to medium-sized watertight sliding/shut-off device meant to isolate a chamber to dewater it, cut or control flow. It is used in all types of plants where water flows in channels or basins (water intake). They are sometimes referred to as sluice gates, slide gates. They are actuated with a level difference between front and ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
The mesh is secured on the panel frame that is slid into the grouted metal wall guides. The water flows across the mesh and the debris are arrested. The screen is lifted out and cleaned when the water flow is interrupted. Installing a second panel in series with the first one makes it possible to lift the panel out for cleaning without interrupting the flow or the screening. Such filters are not ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
The water enters the BOXWIP concrete pit through the upstream aperture, flows through the bar rack which is periodically cleaned by a wall-plate mounted “CV” type rake. The wall-plate is slid into the wall ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
The drum screen is installed in a concrete chamber between two parallel side walls with large apertures. The drum consists of a cylindrical rotor with a cylindrical surface made of side-by-side rectangular mesh panels. The rotor has two bearings and a drive at deck level. The panels travel down into the water. The water flows through the mesh panels into the drum chamber via the upstream inlet, ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
Safe operation requires that when the head-loss reaches a preset value, the cleaning cycle is started and carries on for a minimum period of time or until the head-loss has dropped back to clean machine ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
The efficiency of a condenser tube-cleaning system is dependent on the quality of the cleaning balls injected to clean the tubes. The sponge balls have a diameter that is slightly larger than the ID of the condenser tubes, allowing them to have constant contact with the tube walls. The balls gently scrub and sweep the tubes as they move through ...
Manufactured by:E. Beaudrey & CIE. based inParis, FRANCE
One or more inclined bar racks are installed side-by-side (15° incline) at the plant inlet. On deck, a gantry rail supported by a set of vertical posts, follows the edge of the deck. The carrying trolley runs on the gantry rail. It is fed by a festoon cable system which also runs on the gantry rail. The rake has three cable drums: two to lower and lift the rake, one to open and dose the trash ...