Unicorn - Model CellXllent 170 -CO2 Incubator

CellXllent series CO2 incubators adopts a 180°C dry heat sterilization system, proven effective in killing normally resistant fungi, bacterial spores, and vegetative cells that may contaminate the workspace. Seamless chamber and minimal internal parts are designed for easy cleaning. Precise temperature uniformity throughout the chamber optimize growth conditions. Fast gas and temperature recovery without overshooting ensures the optimal and stable atmospheric conditions. CellXllent CO2 incubator variant with O2 regulation provides O2 control, which provide reliable (severe) hypoxic conditions for stem cell, cancer, or tumor cells.

• 180? dry heat sterilization
• Optional O2 concentration control
• Top-level IR sensor for accurate and fast response
•  Touchscreen interface delivers fast and continuous navigation
•  Inner glass door is convenient to observe during culturing process
•  HEPA air filtration provide ISO Class 5 cleaniness in the chamber

• Touch screen is responsive, easy-to-operate and informative
• Inner glass door design is convenient to observe the cell state during the culturing process in the chamber.
• 180? dry heat sterilization cycle takes 12 hours only, no need to take out any accessories during sterilization.
• Multiple PT1000 sensors with advanced PID algorithm to precisely control the temperature
• 9 heating units in 4 temperature control zones are intelligently controlled by microprocessors.
• Fast temperature, CO2, and humidity recovery without overshoot.
• CARBOCAP® drift free IR sensor ensure a fast respond and accurate CO2 monitoring
• Fan-assisted air circulation enhances the uniformity of temperature, CO2 and humidity.
• Uniform temperature verified at 27 spots inside the incubator (German DIN 12880)
• Entire chamber air volume is filtered by the HEPA filter to achieve ISO class 5 cleaniness within five munites after door opening.
• Blower automatically stops when the door is opened, to minimize mixing of chamber and room air
• Front door heating preventing the condensation formed in the inner glass door and possible contamination
• Unique, seamless,deep-drawn interior chamber reduces any areas where contamination could accumulate.
• Integrated humidity pan with built-in design offers 3 liters  storage capacity.
• Monitor the temperature, RH, and CO2 concentration through access port.
• No special tools required for assembly and disassembly of interior components.
• All gases entering the incubator are filtered through 0.2μm filter to remove airborne biological and particulate contaminants.
• Filtered air circulates across the 304 stainless steel humidity pan to accelerate the humidifying process.
• Intelligent data and event logger records all incubator parameters for on-screen call
• Optional remote monitoring system for events, alarms, conditions and customized tasks.
• Stackable design to save your valuable lab space

• Type : Direct Heat & Air Jacketed
• Capacity : 170L
• Temperature Range : Ambient temperature+3? to 55?
• Temperature Uniformity : ≤±0.3?
• Temperature Accuracy : <±0.1?
• Recovery ** : ≤10mins
• Ambient Temperature : 18-34?
• CO2 Controller : PID microcomputer
• CO2 Range : 0-20%
• CO2 Accuracy : ±0.1%
• CO2 Sensor : IR
• CO2 Recovery ** : ≤5mins
• CO2 Inlet Filter : 0.2μm HEPA filter
• Sterilization : 180? dry heat
• In-chamber filtration : HEPA filter
• Humidifying Mode : Integrated Pan
• rH% : 91% @ low rH mode, 94% @ high rH mode
• Humidity Recovery : 15min
• O2 controller (Tri-gas) : PID microcomputer
• O2 Range (Tri-gas) : 1-20.7%
• O2 Accuracy (Tri-gas) : ±1%
• O2 Sensor (Tri-gas) : Zirconia
• O2 Recovery (Tri-gas) : O2% @ 1.0%: 24mins; O2% @ 5.0%:10mins
• External dimension (W*D*H) : 670*825*920mm
• Internal dimension (W*D*H) : 490.5*560*620.5mm
• Shelf Qty (Standard) : 3
• Max Shelf Qty : Up to 7 optional
• Shelf Dimension (W*D) : 450*485 (Large) 450*440 (Small)
• Max loading of each shelf : 12kg
• Power Supply : 220V AC
• Max. Power : 1000W
• Stable Power : 42W
• Internal Construction : Polished Stainless Steel
• Alarms : Ambient temp., rH%, CO2%, Water level, O2%(Optional)
• Reminder : HEPA filter expiration, Shortage of gas