Conair
Conair - Model MT -Vacuum Sizing Tanks
FromConair
Conair MT Series vacuum sizing tanks provide stable vacuum for precise sizing of tube and profile extrusions up to 4.5 inches {114.3 mm} in diameter. Water/air separation technology improves product tolerances and surface finishes and allows for repeatable quality while minimizing scrap. All models offer a high-efficiency plate heat exchanger, an improved spray bar and water level adjustment system, and a wide range of tank sizes and pump configurations.
Most popular related searches
vacuum sensor controller
three-way valve
water level control
water level controller
air separation technology
vacuum blower
vacuum tank
digital temperature controller
air separator
solenoid valve
- Vacuum gauge
- Sight glass
- Temperature gauges
- Quick dump valves
- Water manifold with valves designated for each chamber
- Open and sealed reservoirs
- High-efficiency plate heat exchanger (back of tank)
- Glass lids
- Internal water level control
- Telescoping drip tray
- Heavy-duty actuators for longitudinal, vertical and side-to-side alignment
- Glass viewing lids – not available on units with vacuum blowers over 1.7 Hp, producing pressures greater than
135 inches of water {3.4 meters of water}. - Telescoping front drip tray – catching water running off the calibration tool. The tray expands from 4 to 12 inches {102 mm to 305 mm}.
- Vacuum control – including eye level, NEMA 12 enclosure with ten turn potentiometer control, AC invertor and manual vent valve for 1.7 hp vacuum blower.
- PAVC+, Precision Automatic Vacuum control with touchscreen HMI – for digital vacuum control providing increased accuracy and interface with measuring equipment including an invertor drive.
- PAVC+
- Ethernet microproccessor interface
- Analog microprocessor interface
- PAVC+ temperature control – including plug in module, thermocouple pickup and heat exchanger solenoid valve.
- Presinnker assembly – for non contact sizing applications including one set of glass inserts bored to size.
- Filter system with flush capabilities – for minimum pressure drop and one hundred gallons per minute filter capacity.
- Three way valve for vacuum shutoff – in secondary chamber. This allows chamber to operate in the flood cooling mode.