Vermeer - Model TR626 -Trommel Screen
With a 6’/1.83 m drum and a hopper that holds 7.5 cubic yards/5.73 cubic meters, the TR626 makes short work of processing material. Access the drum through removable side panels, drum end or top of the drum. Its 125 hp/93.2 kw John Deere 4045 Tier 3 is a powerful workhouse. Impressive 72.5’/22.1 m conveyor features self-cleaning tail pulley and return idlers.
- Enhance worker safety with startup delay and alarm systems that notify your whole crew when the machine is about to start.
- Move material smoothly without bridging, thanks to a tall, wide throat opening.
- Extend belt life even under tough loading conditions with closely set, heavy-duty rollers supporting the apron conveyor.
- Keep screen weights low when processing wet materials by clamping on a smaller diameter tension screen wire and increasing screening area.
- Speed up your clean up because the flashing and sheeting fit tightly against the drum and conveyors to reduce spillage.
- Forget the loading ramps, since the 626 has a low hopper infeed height.
- See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.
The TR626 by Wildcat is the largest screening plant in the trommel screen line. With its 6`-diameter (1.8 m) drum, 7.5-cu-yd (5.7 m3) hopper and 125-hp (93.2 kW) engine, the TR626 can generate up to 200 cu yd (152.9 m3) of material per hour.
Loading and processing organic and wood waste is quicker and more efficient, thanks to the unit’s low hopper infeed height and large throat opening. The impressive 72.5`-long (22.1 m) optional radial fines conveyor can rotate 200 degrees to allow you to stockpile large amounts of material without moving the unit. As with our other machines, the TR626 features user-friendly controls and removable side panels for easy access, maintenance and cleaning.
General Dimensions
Weight: 49,700 lb (22,543.5 kg)
Hitch weight: 16,680 lb (7565.9 kg), (weights will vary with options)
Length (transport): 54.5` (16.6 m)
Width (transport): 105" (266.7 cm)
Height (transport): 13.4` high (4.1 m)
Length (operational): 84.4` (25.7 m)
Width (operational): 105" (266.7 cm)
Height (operational): 15.9` (4.9 m)
Capacity
200 cu yd (152.9 m3) per hr with .5" (1.3 cm) screens installed and material with moisture less than 40%
Engine
Make and model: John Deere 4045H Tier 3
Cylinders: 4
Engine rating: 125 hp (93.2 kW) @ 2400 rpm, 355 ft-lb (481.3 Nm) of torque @ 1500 rpm
Fuel consumption: 3.5 gph (13.2 L/h) under most operating conditions
Hopper and Apron Conveyor
Hopper capacity: 7.5 cu yd (5.4 m3)
Hopper height: 9.5` (2.9 m) from ground level at operating incline
Apron conveyor impact rollers: 4" diameter (10.2 cm) (14)
Screen Drum
Diameter: 6` (1.8 m)
Length: 26` (7.9 m)
Fines Conveyor
Conveyor belt width: 36" (91.4 cm)
Conveyor belt type: 220 lb (99.8 kg), 2-ply, 3/16" x 1/16" (4.8 mm x 1.6 mm)
Conveyor belt stacking height: 16.6` (5.1 m) with drum at 4°
Overs Conveyor
Max variable overs belt speed: 144 fpm (43.9 m/min)
Conveyor belt width: 48" (121.9 cm) wide with raised crescent
Conveyor belt type: 220 lb (99.8 kg), 2-ply, 3/16" x 1/16" (4.8 mm x 1.6 mm)
Conveyor belt stacking height: 3` – 10` (.9 m – 3 m)
Production rates will vary with moisture content, maintenance, operator experience, site preparation among other factors.