Daftech - Model HSN84212900 -Wastewater Primary Treatment Dissolved Air Flotation Units

Below is a comparison of DAF clarifier with conventional sedimentation clarifier:

1. Daftech clarifier has a retention time of 3 minutes against 2 hours in a sedimentation clarifier.
2. TSS removal of 98% is possible whereas in a conventional clarifier the average efficiency does not exceed 70%.
3. Oil removal down to 10 ppm is possible whereas in a conventional clarifier there is no possibility of removing O&G.
4. The higher efficiency of BOD removal in a DAF clarifier results in lower energy consumption in downstream biology.
5. Sludge consistency as high as 3 to 3.5% is achievable against 1 to 1.2% in a sedimentation clarifier.
6. Sludge flows by gravity whereas in a conventional clarifier sludge transfer would require sludge pumps.

• Item Code: HSN84212900
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Any Indian Port
• Production Capacity: 3 units per month
• Delivery Time: 3 months
• Packaging Details: Sea-worthy

• Minimum Order Quantity: 1 Piece
• Feed Flow Rate (cubic-meter/day): 120 m3 to 29
• Type: Circular
• Inlet TSS (Mg/L): Up to 2000 ppm
• Treatment Capacity: 5m3/hr to 1250m3/hr
• Treatment Capacity (m3/h): 5 m3/hr to 1250 m3/hr
• Water Source: Industrial Effluent, Commercial Waste Water, Municipal Sewage
• Industry: Paper Mills, Leather Industry, Pharmaceutical Industry, Automobile, Dairy Industry, Slaughter House, Chemical/Petroleum Industry
• Air flow rate(m3/h): Depends on the Floatcell size
• Surface Area (m2): 1.02 m2 to 197.95 m2
• Applicable Industry: Chemical Industry, Oil refining Industry, Slaughter House, Food Industry
• Treated Water Quality: TSS 100 ppm or less
• Dimensions (Mtrs): Dia 1.2 meter to 16.8 meter
• Treatment Stages: Preliminary Treatment, Primary Treatment
• Bridge Type: Half Bridge, Full Bridge
• Installation Type: Prefabricated
• Tank Diameter: 1.2 meter to 16.8 meter
• Dimensions (in meters): Diameter 1.2 meter to 16.8 meter
• Volume (in cubic-meters): 0.225 m3 to 62.37m3
• Hydraulic Loading: 9.6 m3/m2/hr
• Solids Loading: 16 kg/m2/hr
• Tank Height: 650 mm
• Installation/Civil Work: Installation Available
• Approximate Power Consumption (in kW): Depends on Floatcell Size
• Manufacturing Lead Time: 3 months
• Material of Construction: PU-coated MS, SS 304, SS316, SS316L, Duplex Steel
• Diameter: 1.2 to 16.8 meter
• Max. Capacity Excluding Recycle: 1247 m3/hr.