OFS Online Fluid Sensoric GmbH
SaveCost - Model C -Water Softener Control Heads Monitor
Is the "guardian" for a water softener that works specifically with CLACK® control heads. The parameterized hardness limit value is monitored and the regeneration of the columns is triggered at the CLACK® control head, if necessary. In addition to greater operational safety, the softener generates up to 160% more soft water with less flushing water and salt. This also reduces operating costs by up to 60%.
Most popular related searches
water softener
water softening
wash water
water hardness
raw water
hard water
water control
automatic monitoring
monitor soft water
produced water
monitoring & control on CLACK® softeners:
- use for TWIN, WS 1.0; WS 1.5; WS 2.0 and WS 3.0
- monitoring the amount of soft water produced with a hardness sensor
- triggering forced regeneration when capacity is exhausted
at a glance
- quality control operating mode
- automatic change to quantity control (if required)
- determination: additional yield of soft water, number of regenerations
- automatic self-monitoring
- chronological storage of operating data in the electronic operating diary (USB stick)
- optional: LAN data interface (modbus)
- optional: brine and salt storage tank control with alarm via e-mail (WLAN network required)
ideal solution for
- water softener with CLACK® control heads
prevents
- too much use of salt and rinse water
- too many regenerations
- unnecessary maintenance
- optimal utilization of the softener columns
- more soft water (up to 160%)
- more operational safety
- lower operating costs (up to 60%)
- less rinse water and salt (ecological operation)
- housing dimensions: 400 x 250 x 160 mm (W x H x D)
- power supply: 100 … 240 V / 50 … 60 Hz
- operating voltage: 24 V DC, about 20 watts
- water hardness range raw water: 0.9 mmol/l to 8.9 mmol/l
- threshold value range soft water: 0.009 mmol/l to 0.18 mmol/l
- CLACK® types: TWIN; WS 1.0; WS 1.5; WS 2.0; WS 3.0