ASTI - Model B Series -Waterproofing Style Submersible Sensor
Suitable For the Most Aggressive Agitated Slurry Solutions and Corrosive Liquids – Recommended for Installations without guide rod or conduit – Direct Insertion into volatile tank – COMPLETE CABLE ISOLATION WITH VINYL OR NORPRENE TUBING & NO METAL PARTS WHATSOEVER.
Most popular related searches
pH/ORP sensor
ion-selective
ORP sensor
waterproofing
pH sensor
dissolved oxygen sensor
corrosive liquid
chlorine dioxide
oxygen sensor
chlorination
- 3/4" MNPT Rear Threaded Immersion Sensors
- 6X11, 6X13, 6X12, 6X53, 6X54, 6X32 & 6X42 Series pH/ORP Sensors
- 3/4" MNPT Rear Threaded Sanitary/HOT-TAP Sensors
- 5X31, 5X41 & 5X51 pH/ORP Series Sensors
- 5XX0 Ion Selective (ISE) Series Sensors
- AST-DO-UNIVERSAL Dissolved Oxygen (DO) Series Sensors in the universal and sanitary/HOT-TAP configurations
- 1" MNPT Rear Threaded Immersion Sensors
- 6X52, 6X51, 6X31 & 6X41 Series pH/ORP Sensors
- 6XX0 Series Ion Selective (ISE) Series Sensors
- 1" MNPT Read Threaded Twist Lock Sensors with protective tines (guard) option added
- 8X52, 8X51, 8X31 & 8X41 Sensor pH/ORP Series
- 8XX0 Series Ion Selective (ISE) Series Sensors
- AST-DO-UNIVERSAL Dissolved Oxygen (DO) Series Sensors in the twist lock quick disconnect configuration
- 1-1/4" MNPT Read Threaded Immersion Sensors
- AB 6100 Fluoride Ion Selective Sensors Only
- Complete isolation of back end threaded fitting from liquid process and good protection of cable from corrosion and chemical attack
- Major Rear threading is identical to that specified on original sensor specifications prior to application of Waterproofing "B" Option
- Hex Head for wrench flats enable easy installations into fixtures
- Recommended for extremely corrosive installations or installations which do not utilizes any kind of guide rod or conduit, or extremely slurry/viscous solutions which can abraid cable assemblies
- Recommended primarily for elongating sensor life where attack of liquid from back end causes death to sensor prior to chemical or physical attack through front of probe
- For Applications Requiring Waterproofing Assemblies to be constructed of only CPVC (for strong oxidative or reducing solutions - i.e. chlorine, chlorine dioxide, strong hydrogen peroxide or ozone solutions... etc.); Change Waterproofing part description from Waterproofing "B" to "H" (as shown in photos to right)