ASTI - Model C Series -Waterproofing Submersible Sensor
Suitable for Aggressive Agitated Slurry Solutions and Corrosive Liquids with additional sealing compared to "A" Series. Completely Submersible when installed with suitable immersion tube (a.k.a. guiderod or standpipe).
Most popular related searches
pH/ORP sensor
ion-selective
ORP sensor
pH sensor
dissolved oxygen sensor
waterproofing
corrosive liquid
oxygen sensor
standpipe
- 3/4" MNPT Rear Threaded Immersion Sensors
- 6X11, 6X13, 6X12, 6X53, 6X54, 6X32 & 6X42 Series pH/ORP Sensors
- 3/4" MNPT Rear Threaded Sanitary/HOT-TAP Sensors
- 5X31, 5X41 & 5X51 pH/ORP Series Sensors
- 5XX0 Ion Selective (ISE) Series Sensors
- AST-DO-UNIVERSAL Dissolved Oxygen (DO) Series Sensors in the universal and sanitary/HOT-TAP configurations
- 1" MNPT Rear Threaded Immersion Sensors
- 6X52, 6X51, 6X31 & 6X41 Series pH/ORP Sensors
- 6XX0 Series Ion Selective (ISE) Series Sensors
- 1" MNPT Read Threaded Twist Lock Sensors with protective tines (guard) option added
- 8X52, 8X51, 8X31 & 8X41 Sensor pH/ORP Series
- 8XX0 Series Ion Selective (ISE) Series Sensors
- AST-DO-UNIVERSAL Dissolved Oxygen (DO) Series Sensors in the twist lock quick disconnect configuration
- 1-1/4" MNPT Read Threaded Immersion Sensors
- Special Order Basis Only
- Complete isolation of back end threaded fitting from liquid process and good protection of cable from corrosion and chemical attack
- Rear threading is identical to that specified on original sensor specifications prior to application of Waterproofing "C" Option
- Hex Head for wrench flats enable easy installations into fixtures
- Not Recommended for extremely installations which do not utilizes any kind of guide rod or conduit
- Recommended for extremely corrosive and/or slurry, viscous or high-speed process solutions which can abraid cable assemblies
- Recommended primarily for elongating sensor life where attack of liquid from back end causes death to sensor prior to chemical or physical attack through front of probe