Wyckomar - Model Transportable 250 GPM (~1000 LPM) - Water Treatment System
Rated Flow: 946 litres per minute (250 gpm), 56,7600 litres/hour, 1.36 mio litres/day (15,000 gallons/hour, 360,000 gallons/ day). Initial UV Dose at Rated Flow: 35 mJ/cm2 (35,000 μwsec/cm2) @ 95% T. Electrical: 100-130V / 50-60 Hz, 220-240V/ 50-60 Hz. Approx. Power Usage: 700 W. Maximum Operating Temp: 37 oC (98.6 oF). Maximum Operating Pressure: 125 psi – 8.6 bar (tested to 500 psi). Plumbing: 3” Flange In/Out. Chamber Material: 316L Stainless Steel. Filtration (in SS Housings): 50, 20 and 1A Micron Sediment Filter. Custom Filter Configurations Available. Additional Features (Optional): Real Time Monitoring of UV, TDS, ORP, Pressure gauges, Test Ports, Solenoid Valve.
This All-in-One Water Treatment System, installed at the point of entry, is ideal for commercial and industrial operations where a high volume output is required, e.g. for process water disinfection. The system offers multiple levels of sediment and carbon filtration down to 1 micron, using high-volume, stainless steel filter housings and is ideal for the treatment of ground or surface water. It will purify the source water of most harmful microorganisms such as viruses, bacteria and protozoa with a powerful UV disinfection dose that will inactivate the pathogens at a kill rate of >99.9% (Giardia, E.coli, Cryptosporidium, Vibria cholera, Legionella, Salmonella, Shigella, Streptococcus and many others). The water is enriched with chlorine on its last stage for downstream protection.
This skid mounted system offers very efficient water treatment at a low cost per unit volume. The system is designed for transportation and installation and is fully tested prior to shipment.
Fail-Safe Operation with UV-Monitor
The monitor is a safety device that monitors the UV systems’ effectiveness in real time and displays the UV intensity on the meter face. Turbidity and ORP levels may also be monitored based on configuration chosen. The monitor will sound an alarm and trigger a solenoid shut-off valve in case the UV lamp burns out or the dose is inadequate for porper disinfection. Presure gauges on the filter housings ensure easy monitoring of the filter status.