Xingfu - Model 15T -Fully Continuous Waste Tyre (Plastic) Pyrolysis Plant

FromQingdao Xingfu Boiler Thermopower Devices Co.,Ltd

SHARE

Internal screw rotatory pyrolysis. No coking. Hot melt processing in advance, process generated HCL specially, more environmental protection. Adopt multilevel cooling design, to get more fuel oil. Hot air heat, cooperated with low temperature pyrolysis catalyst, extend working life of plant. Enclosed production all the way, no leakage and no dust loss, environmental protection. Exhaust gas multistage processed, gas emission reach European Standard level.

Most popular related searches

waste tire pyrolysis plant

fully continuous waste plastic pyrolysis

plastic pyrolysis plant

tire pyrolysis plant

plastic waste pyrolysis plant

waste pyrolysis plant

plastic pyrolysis

plastic waste pyrolysis

Waste plastic and medical waste sent into fuel preheater by conveyor to melt. Process generated HCL specially
Melted fuel continuously sent into reactor, and finish pyrolysis under low pressured catalyst
After generated gas during pyrolysis separates in gas-liquid separator, liquify in condenser and get fuel oil. After fixed bed second catalyst and dewaxing , can get the fuel oil with high quality.
Carbon residue after pyrolysis output continuously by cooling conveyor, and made to be carbon rod as fuel.
Flammable gas goes into exhaust gas treatment tank to desulfur, then extracted by vacuum pump and enter into water sealed tank, sent to hot air stove to burn.

Item : 15 T fully continuous waste tyre pyrolysis plant
Type : XFLJ--15
Capacity : 15T/D
Operating temperature : <650°
Material : Q345R
Fuel consumption in start : 300 kg
Fuel consumption in operation : 0 (the syn gas from the system be burnt by the system itself)
Heating way : Hot air circulation heating
Tire requirement : Tyre piece <20mm
Working pressure : Normal pressure
Methods of flame retardant : Nitrogen Blow
Total power : 90 kw
Running power : 80kw/h
Boundary dimension : 14000mm(L) x 2400mm(W) x 4000mm(H)
Floor space : 36000 mm x3500 mm
The highest install elevation : 7000 mm
Labor : 1-2 people
Working life : 5-7 year

Fuel oil: 45-50%
Carbon residue: 32-36%
Steel wire: 2-14%%
Syn gas: 3-5%