Zeparo G-Force - Microbubble Dirt and Magnetite Separator
Comprehensive range of products for sludge and magnetite separation in heating and cooling water systems. The number of potential applications as well as their modular construction is unique. Its new cyclonic technology takes dirt separation efficiency to the next level.
High separation efficiency with Cyclonic technology
Cleans your system in fewer cycles, each time reducing dirt particles that would normally deposit in the system with each additional cycle. The dirt collected can be easily and quickly flushed out with the help of the drain valve.
High efficiency independent of dimension
Separation efficiency increases together with flow velocity. The pressure drop remains stable regardless of the amount of dirt collected. Even higher protection for higher flows, e.g. in cooling applications. Suitable for heating and cooling installations.
Cleans and protects the installation
Protects critical investments such as boilers, pumps, valves, chillers, and calorie meters, from dirt-related malfunction and failure. No risk of clogging - the dirt collected can be easily and quickly flushed out with the help of the drain valve. Reduces maintenance and associated costs over entire system lifetime.
Magnet Accessory
Optimizes separation efficiency even further for sludge and magnetite (black iron oxide) deposits that consist of finer magnetic particles. Easy handling and cleaning.
Air separation
Due to the cyclonic effect, pressure in the centre of the device is below system pressure, causing more air bubbles to be released than in standard separators. The air is concentrated in the centre forming larger bubbles, which can raise in the upper section of the G-Force where there is less flow. This function requires an additional ZUTX automatic air vent.
Application:
Heating and chilled water systems.
Media:
Non-aggressive and non-toxic system media.
Addition of antifreeze agent up to 50%.
Pressure:
Max. admissible pressure, PS: 232 psi and PN 25 (see each product)
Min. admissible pressure, PSmin: 0 psi
Temperature:
Max. admissible temperature, TS:
- PN16: 110 °C
- PN25: 180 °C
Min. admissible temperature, TSmin: -10 °C
Material:
Steel. Color beryllium.
Marking:
Body: flow direction arrow.
Label: DN, PN, TS and TSmin.
Connection:
Flanges according EN-1092-1.
Welding ends.
Grooved ends.
Transportation and storing:
In frostless, dry places.
Approvals:
Constructed according to PED 2014/68/EU.