Infiltration Control Services

When a leak is located by the television camera, our technician stationed in a mobile laboratory at the job-site can isolate and seal the leak, usually in less than a minute. Pipe condition, type of leak, type of soil, chemicals present in the sewage and ground water pressure are all factors that are considered before selecting a chemical/catalyst combination that is most suitable.

Proportioning, blending and injection of the grout is varied to meet specific conditions and requirements of each individual job. The operation is handled entirely from above ground without any excavation, blockage of sewers or by-passing of sewage. All seals are fully guaranteed.

Our Unmatched Guarantee: "You must be satisfied or you pay absolutely nothing for our services."

Check the numbers:

• If you have a 300-foot section of 8-inch pipe with 3-foot joints, and 20% of the joints are leaking 1-gallon per minute.
• Infiltration into your system equals 10,512,000 gallon per year.
• Using a conservative cost estimate of $2.00 per thousand gallons to treat the water, you are spending $57.60 per day - that’s over $21,000 annually on this 300-foot section.
• The industry average cost for grouting is $8-$12 per foot. By grouting this same section at a cost of $10 per foot, your grouting expense will total $3,000.
• In just 53 days you will have recouped your initial investment of $3,000 and at the end of the first year you will have saved over $18,000 in unnecessary treatment costs.