- Home
- Companies
- Delphian Corporation
- Software
- Delphian Sage-CE - Web-Enabled Gas ...
Delphian Sage-CE - Web-Enabled Gas Monitoring System
SAGE-CE is a powerful software/hardware product designed for the monitoring of toxic and combustible gases. Sage-CE runs on microcomputers connected in real-time to gas monitoring equipment via a Satellite-485. Up to eight Delphian sensors can be connected to each Satellite-485 (up to 5,000 feet). Each Satellite-485 is connected by twisted pair to a host SAGE-CE (up to 4,000 feet). The SAGE-CE will monitor and report on all sensor activity. Web enabled - it can be accessed by any computer connected to the internet anywhere.
Web enabled - it can be accessed by any computer connected to the internet anywhere. The Radio Modem Satellite-485 is wireless and transfers data at 9600 baud up to ¼ mile in a city environment or greater than 20 miles line-of-sight with a high gain directional antenna.
This module is perfect for applications where remote monitoring is required without installation of hard wiring to the SAGE-CE Computer.
- Real-time dynamic and animated graphic screens and alarms customized to your plant layout. See what your sensors are reading immediately.
- Provides remote management capability - reset your alarms from a distance.
- Sends emails and/or text messages upon alarm.
- View multiple gas monitoring systems from one web browser.
- No hard disk. Program stored in flash memory.
- Multi-level security for applications, including use over Intranets and Internet.
- Satellite-485 protects equipment from ground loops and power surges by providing opto-isolation of A/D input and transformer based isolation up to 3000 VDC
- Data communications with corporate systems.
- REPEATER-485 can extend the twisted pair an additional 4,000 feet for each one used.
- The Sage CE Radio Modem is small with low power consumption, easy to integrate into the data highway, and requires no knowledge of RF. There is a choice of integral or separate external antennas. FCC approved - no additional licensing or
- approval required.
- Compatible with all Delphian sensors and systems.
- Local or remote supervisory stations.
- Runs on 24VDC.
- Display: 12.1" or 15" TFT VGA LCD Terminal
- LCD resolution: 800 x 600 or 1024 x 768
- Ethernet: 10/100 Base T Interface
- USB: One USB port
- Keyboard/Mouse: PS/2 keyboard/mouse port
- Touch screen: 4-wire, analog resistive, continuous resolution
- Housing: NEMA4/IP65 compliant AI-Mg housing
- Power input: 24 VDC, 3A maximum
- Dimensions (W x H x D): 311 x 237 x 50 mm (12.24" x 9.33" x 1.97")
- Weight: 2.2 kg (4.85 lbs)
- Operating system: Windows CE
- Operating temperature: 0 - 50C (32 - 122F)
Sensor Satellite-485
- lnput: 8 channels: mV, V, mA
- Sampling rate: 10 samples/sec. (total)
- Accuracy: ±0.1% or better
- Power consumption: 1.2 W @ 24 VDC
- Operating temperature: 0 - 70C (32 - 158F)
- Operating humidity: 0 - 95% (non-condensing)
Relay Satellite-485
- 8 Channels: four Form A and four Form C
- Contact rating: AC: 125 V @ 0.6 A; 250 V @ 0.3 A
- DC: 30 V @ 2 A; 110 V @ 0.6 A
- Typical relay time: On: 2 msec; Off: 4 msec
- Power consumption: 0.6 W @ 24 VDC
Repeater Satellite-485
- Power Consumption: 1.4 W @ 24 VDC
Radio Modem Satellite-485
- Radio frequency: 902-928 MHz, unlicensed ISM
- Type: Secure Frequency Hopping Spread Spectrum
- Network topology: Point to Multipoint, Point-to-Point
- Channel capacity: 65,535 Network Identifiers share 25 hop Channels
- Rx sensitivity : -110 dBm (9600 Baud) Long Range > 20 Miles
- Transmit power: Output 100 mW nominal
- Range: Indoor: 600’ to 1500 feet; Outdoor: <7 miles
- Supply voltage: 9 to 28 VDC
- Current consumption: Tx 150 mA, Rx 50 mA, Power Down <10 A
- Operating temperature: -40 to 85 C (-40 to 185 F)
- Operating humidity: 10% to 90% (non-condensing)