Only show results in Virginia? Ok

Soil & Groundwater Applications

  • Ground Penetrating Radars (GPR) for Forensics and Military

    Police can use GPRs in different forensic investigations (search for hidden burials, underground hiding places and passages etc.).  Military uses of GPR include location and detection of buried explosive devices and land mines.

    By Transient Technologies LLC based in Kyiv, UKRAINE.

  • Tunnels

    The geotextile performs two primary functions when used in the construction of tunnels:- 1. Protection of the linear from abrasion and puncture by protrusions from the base surface of the tunnel well. 2.Drainage of water seeping through the rock and sprayed concrete layer. The in-plane oermeability of the geotextile enables the water to flow to a subsurface drainage collection system. where it is directed awa from the tunne

    By Manas Geo Tech India Pvt. Ltd. based in New Delhi, INDIA.

  • Automated solutions for the marina dredge and canal dredging

    The 8” Swinging Ladder Dredge is ideal for channels, rivers, marinas, lakes, and canals where maneuverability and wider cuts improve productivity. The 8” Swinging Dragon Dredge uses an 8” x 8” high chrome, hull mounted dredging pump for wear resistant, efficient pumping. The dredge can cut a maximum path of up to 22’ wide allowing the dredge to cut a wider path than most one truck transportable dredges.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Geosynthetic Lining for Secondary Containment

    GCLs can be used around and underneath secondary containment above ground petroleum storage tanks. of above ground storage tanks and are easy to install. Installation details and penetrations are easily handled using simple installation techniques and can be quite cost effective.

    By CETCO based in Hoffman Estates, ILLINOIS (USA).

  • Soil and groundwater protection in the petroleum industry

    Bristar Containment Industries has been serving Environmental Protection in the Upstream Petroleum Industry for 15 years. Prevention of soil and groundwater damage is preferred to clean up after the fact.

    By Bristar Containment Industries Ltd. based in Wimborne, ALBERTA (CANADA).

  • Automated solutions for the environmental remediation dredging

    LWT’s dredging systems are used for environmental remediation and cleanup. The automated dredging systems from LWT can handle the toughest contaminated sludge and keep operators safe with radio remote operation. Bio-degradable hydraulic oil used in the dredges eliminates any environmental hazards.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Pumping solutions for marine

    Fluids Handled - Fuel-injection, Oil burners, Boosting, Hydraulics, Fuel, Lubrication, Circulating and Feed Pumping.

    By Hydro Prokav Pumps (India) Pvt. Ltd. based in Sidco, INDIA.

  • GPR Applications

    Our GPR products aid in determining mining safety, establishing bedrock depth, mapping sand and gravel deposits, ascertain rock quality, in addition to mineral exploration. Mining professionals use ground penetrating radar to accurately locate underground structures before drilling, blasting or carrying face operations. Ground penetrating radar is instrumental in helping to identify overhead separations in order to prevent ceiling collapses. In deep mine applications, ground penetrating radar is invaluable for identifying geologic features that may be potential areas for rock bursts, such as fractures, shear zones and faults. GPR is being used as well for mineral exploration in igneous and metamorphic rocks, such as granitic pegmatite, to locate hydrothermal features including cavities and vugs.

    By Geomorph Instruments based in Piraeus, GREECE.

  • Wear-resistant elbow for pulp & paper industry

    HammerTek`s Smart Elbows are widely recognized for their ability to save costs, time and space by promoting a deflective direction change. The Smart Elbow is used by industry leaders all over America and Canada such as Weyerhauser, Georgia Pacific, and Northwood Pulp & Timber just to name a few.

    By HammerTek Corporation based in Bethlehem, PENNSYLVANIA (USA).

  • Walk Behind Sand Sifting and Soil Screening Applications

    The SAND MAN 850 is a versatile sand sifter and soil screener that has a wide variety of applications. Its inherent manueverability, effectiveness, and ease of operation make it a valuable tool for golf course owners, small beach owners, and anyone who maintains smaller sandy areas. By screening stones, litter, shells, glass, and other finer objects, the SAND MAN ensures your property will be debris-free.

    By H. Barber & Sons, Inc. based in Naugatuck, CONNECTICUT (USA).

  • ASTM Color (0-7) #3070

    ASTM color is an important product quality measurement for many refinery and petrochemical processes. The purpose of this application note is to determine ASTM (D1500) color with the ClearView db fiber optic photometer for real-time ASTM color measurement from 0-7. Quantify yellowness for product quality measurement for many refinery and petrochemical processes. Get results in real-time (seconds). Use for ASTM and other parameters in complex streams. Detect potential cross-over contamination in fill or supply lines in real-time. Gain significant improvements in process control. Guided Wave's in-process NIR analyzer will determine ASTM (D1500) color in real time helping operators improve process control 24/7.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Determine Saybolt Color #3067

    Accurate online saybolt measurements from zero to +36. - Quantify yellowness for manufacturing control and product uniformity. - Ensure your product meets customer expectations - Detect potential cross-over contamination in fill or supply lines in real-time - Take the guess work our of product appearance standards - Application Note #3067

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Moisture Monitoring for Instrument Air & Compressor Systems

    The presence of humidity in a blanketing gas for sensitive instruments can cause corrosion problems, rapid changes incalibration and loss of sensitivity. The presence of oil contamination in compressors can cause similar problems.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Electrical Based Tomography Systems for Batch mixing

    Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing). Alternatively, an array of up to 8 circular planes, each with 16 electrodes can be used to provide a more complete picture of the mixing process.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • GIS software for petroleum industry

    For years, petroleum companies have used Esri`s GIS to decide where to drill a well, route a pipeline, build a refinery, and reclaim a site. Today`s GIS provides oil and gas industry solutions throughout the petroleum life cycle. All major oil companies in the world use Esri`s GIS technology to manage their location-based information, from leases, wells, and pipelines to environmental sites, facilities, and retail outlets.

    By Esri based in Redlands, CALIFORNIA (USA).

  • GIS software for water resource industry

    GIS is a powerful tool for developing solutions for water resources such as assessing water quality and managing water resources on a local or regional scale. Hydrologists use GIS technology to integrate various data and applications into one, manageable system. The suite of tools contained in Arc Hydro facilitate the creation, manipulation, and display of hydro features and objects within the ArcGIS environment.

    By Esri based in Redlands, CALIFORNIA (USA).

  • Erosion & sediment control solutions for costal/beach region

    Coastal erosion is the wearing away of land or the removal of beach or dune sediments by wave action, tidal currents, wave currents, or drainage. Removing sand and other materials from beaches and dunes due to tidal storm surges and construction purposes causes massive beach erosion damages and land loss of seashores, thus destroying the natural heritage of the coast and reducing the vibrancy of the tourism industry. Uprooting vegetation from coastal areas destabilises beaches and clearing sites inland results in increased soil and dirt particles being washed offshore and smothering coral reef systems.

    By Erosion Control Forum based in Bend, OREGON (USA).

  • Sedimentation monitoring

    By Lindorm, Inc. based in Medley, FLORIDA (USA).

  • Continuous Monitoring of Wastewater

    The Sorbisense method allows for efficient monitoring of the sewage system and can help reduce costs of operation and environmental impact. The method is particularly well suited for tracking the source of periodic discharges, the identification of faulty pipe connections of the measuring of values in the recipient. The method also allows for measurements in dynamic sources - such as emissions from roads, roofs, parking lots and overflow

    By SORBISENSE based in Tjele, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you