Only show results available in Virginia? Ok

Dredging Systems Applications

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including water treatment facilities, sludge ponds, sulfur recovery units, and API separators. To remove odors during tank cleaning and maintenance operations, portable dispersion systems can be used in the immediate work area to control malodors. Ecosorb products can be directly injected into flues and stacks and may be used as a substitute scrubbing solution in some applications.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Environmental dewatering solutions for environmental dredging

    TenCate Geotube technology helps to dewater and contain contaminated sediments in rivers, bays, harbors, marinas, ports, dock facilities, hydro basins and other waterways.  In many cases, these sediments pose significant environmental hazards, and remediation is a difficult and expensive task.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Automated solutions for the marina dredge and canal dredging

    The 8” Swinging Ladder Dredge is ideal for channels, rivers, marinas, lakes, and canals where maneuverability and wider cuts improve productivity. The 8” Swinging Dragon Dredge uses an 8” x 8” high chrome, hull mounted dredging pump for wear resistant, efficient pumping. The dredge can cut a maximum path of up to 22’ wide allowing the dredge to cut a wider path than most one truck transportable dredges.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Automated solutions for the power plant inlet water dredging

    Liquid Waste Technology’s dredging systems are used for power plant cooling water dredge applications. LWT’s dredges are designed to remove the sand, silt and sediment that build up in reception ponds and inlet channels to power plants. Each dredging system is custom built for the inlet water application, including the level of automation, removal rate and dredging depth required for each job.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Amphibious multipurpose dredger for preventing floods and cleaning the environment

    Watermaster Classic can move and work in extreme conditions.

    Because of this Watermaster is ideal for preventing e.g. floods and damage caused by flooding. This multipurpose dredger can operate where no other machine can.

    • Flood prevention
    • Cleaning of urban canals
    • Vegetation and trash removal
    • Removal of polluted sediments

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • River and canal maintenance

    When maintaining rivers and canals Watermaster Classics excellent moving capabilities and versatile tools are of prime importance. When Watermaster works, it does not disturb passing traffic because it anchors with its own spuds, unlike one-purpose machines, which require cables for anchoring and stop the other traffic while working. Watermaster Classic is an excellent solution for accurate dredging. It can remove an exact layer of sediment from the bottom. Its excellent moving and anchorage capabilities enable efficient dredging in places where dredging has to be done in several different areas of the river. Watermaster Classic does not need external help to move from one place to another. Precision dredging is especially needed when exact hydrometrical modelling has been done. Watermaster Classic ensures the right results which are effective and long lasting.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Channel passage deepening

    Very typical work for Watermaster Classic is deepening canals, rivers and other waterways. Many sites, which are impossible for other machines to get to, can be deepened and cleaned easily with Watermaster. The vegetation and trash is normally removed first by backhoe work and then the bottom is deepened to the desired depth by backhoe work or by pumping.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Automated solutions for the industrial lagoon / pond dredging

    Liquid Waste Technology’s dredging systems are widely used for industrial lagoon dredging applications. Electric driven or diesel engine driven dredges are used for removing mine tailings, dredging chemical processing waste ponds, and slag recovery. Automation can be added to make dredging industrial lagoons more efficient and productive.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Automated solutions for the environmental cleanup dredging

    Environmental cleanup is an important application for LWT dredges. Mud Cat and Pit Hog dredges are used for chemical and biological cleanup in harbors, rivers and lakes. The patented auger shroud on the Mud Cat dredges minimizes turbidity, and entraps suspended material for suction efficiency. LWT’s automated controls and instrumentation allows the operators to assess real time performance of the dredge technology.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Automated solutions for the environmental remediation dredging

    LWT’s dredging systems are used for environmental remediation and cleanup. The automated dredging systems from LWT can handle the toughest contaminated sludge and keep operators safe with radio remote operation. Bio-degradable hydraulic oil used in the dredges eliminates any environmental hazards.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • SONARtrac - Dredging - Hopper Vessels

    Soil density, hardness, lithology, and sediment particle size distribution can create slurry of variable makeup and density. At a constant pump speed, the slurry will have a variable flow velocity, which is undesirable and potentially dangerous. If the velocity is too low, there is a risk of sand outs in the pipeline. If the velocity is too high, the pump will wear and be inefficient. Traditional velocity flow meters with wetted parts are prone to wear, causing measurement inaccuracies, and require frequent, costly replacements. In addition, the presence of entrained gases may disturb the readings of traditional flowmeters and cause slurry density measurements to be inaccurate.

    By CiDRA Corporate Services Inc based in Wallingford, CONNECTICUT (USA).

  • Dredging

    Dragflow dredging equipments are widely used in underwater excavation and dredging activities. Dragflow pumps are design to work both in shallow seas, or fresh water areas, as well as in deep water applications. The unique design of dredging cutters allows Dragflow equipments to reach an exceptional solid concentration also in presence of very compact soil.

    By Dragflow S.r.l. based in Villafranca, ITALY.

  • Floating Cover – Industry

    The Hexa-Cover Floating Cover is the optimum solution as a cover for almost any form of surface liquid, i.e.: Chemicals Chemical, Oil Oil, Leachate Leachate, Decoction Decoction, Food and Beverage Food and Beverage, Pulp and paper Pulp and paper, Hexa-Cover(R) Floating Tile Cover Fish farms, Slaughter houses Slaughter houses, Dairies Dairies, Cement plants Cement plants, Mines Mines, Dredging and excavation works Dredging and excavation works, , for controlling odor, heat loss, emission etc.

    By Hexa-Cover A/S based in Thisted, DENMARK.

  • Automated solutions for the municipal sludge recycling using dredges

    LWT`s dredging systems can be used for municipal sludge recycling applications. Sludge is mixed with compost and used in nurseries, sod farms, and agricultural applications.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Separation solutions for dredging industry

    Dredging is the process of removing organic and/or inorganic sediment from the bottom of shallow water bodies in order to economically dispose of those sediments and/or have them repurposed for land farming or construction purposes. Elgin Separation Solutions manufactures effective solid recycling systems capable of handling high flow capacity. Elgin`s linear motion shakers have the largest screening surface area on the market. In addition, we have complete desilter and desander hydrocyclone manifolds incorporated into packaged trailer mounted systems making for an ideal mobile recycling solution.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Industrial pool maintenance

    Maintenance of industrial pools is easily done by utilizing Watermaster`s suction dredging capabilities and independent moving capabilities. It is easy to transport our Watermaster to the site on a trailer and from there the dredger simply `walks` to the pool by itself. At the pool Watermaster moves with its own propulsion system and can also move to another pool by using its excavator assembly and spuds. From the pool the dredger can pump the mass in another pool up to one and a half kilometres away. By backhoe work it can build and repair the pool banks.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Amphibious multipurpose dredger for maintaining and cleaning industrial ponds

    Maintenance is easily done by utilizing Watermaster`s suction dredging capabilities and independent moving capabilities.

    Watermaster is easy to transport to the site on a trailer and from there the dredger simply walks into the pool by itself. In the pool Watermaster moves with its own propulsion system and can also move to another pool by using its excavator assembly and spuds. It can pump the mass into another pool up to 1,5 kilometres away. By backhoe work it can build and repair the pool banks.

    Watermaster can also recover valuable materials from tailings ponds and drainage ponds.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you