Only show results in Connecticut? Ok

Drilling Equipment Applications

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Industrial matter treatment for the recycling industry

    In Regards to applications in Recycling Area Pieralisi provides efficient solutions to treatment processes for Drilling Mud, Treatment and recycling of Industrial Fluids, recycling of Polymers and their respective recyclables, Recycling of services water in industrial processes and many other applications.

    By Pieralisi Group based in Jesi, ITALY.

  • Premium

    Sampling and drilling equipments for the golf and turf industry

    AMS has many of the essential tools you need for golf course and turf grass maintenance. For over 65 years, professionals from around the globe have trusted the durability of our high-quality, hand-crafted soil sampling equipment. Our ‘Golf and Turf’ product lines include soil probes, scoops, turf profilers, augers, and other specialty equipment. Below are the AMS products most commonly used for golf course maintenance. However, you may also be interested in the full lines of AMS soil probes and soil...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • Premium

    Albin peristaltic`s pumps for chemical industry

    Pumping / transfert / dosing various acids, PVDF latex, alcohol, soap, non aromatic solvents, acids, alkalis, suspensions, stabilizers, glue, crude oil, solvents, heavy oils, cleaning of petroleum sludge food industry, in drilling plants.

    By Albin Pump SAS based in Montelimar, FRANCE.

  • Premium

    Solids Control Centrifuges for Drilling Fluid Dewatering

    Saving Money, Time, and the Environment Through Chemistry A General Process Philosophy Description of Elgin’s Drilling Fluid Dewatering Systems. The drilling industry is regulated by a myriad of environmental regulations that protect our air, water, and land resources. As these regulations continue to evolve, so too must the technologies utilized by the drilling industry. Though lowering compliance costs is always a worthy initiative, incorporating technology that also enhances the drilling process by...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Separation solutions for HDD / trenchless industry

    The HDD, trenchless and underground construction industry has realized the benefits and economics of recycling drilling fluid and slurry. With increased transportation costs and more stringent environmental enforcements and overall cost containment, the need for recycling is evident in all countries and across the range of trenchless applications. From maxi and mini HDD rigs to microtunneling and pipe jacking, packaged mud recycling units and mud reclaimers are an invaluable asset. The below diagram represents a...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Sampling and drilling equipments for the environmental industry

    Environmental consultants, engineering firms, and researchers in the environmental industry use AMS products for a variety of sampling, testing, and monitoring needs.

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • Premium

    Sampling and drilling equipments for the pest control industry

    AMS, Inc. offers installation equipment for bait station and monitoring stations for the pest management technician who wants the ultimate fit and finish.

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • Premium

    Pressure intensifiers for high pressure washing & intensifiers applications

    Hydraulic tools: rescue scissors, spreading tools, hydraulic high torque wrenches, rescue and lifting cylinders, tree scissors, pressing, caulking and tensioning tools. Hydrostatic pressing for sintering and production of ceramic parts. Hydraulic presses using increased pressure in the speed cycle and safe ultra-high pressure at low speed, thus allowing the higher load capacities of seals at low speed as well as allowing smaller and cheaper cylinders. Automation and production controlled cutting, contouring,...

    By Neron Pumps based in Ranica, ITALY.

  • Premium

    Deep well level measurement for ground water industry

    Application: Deep drilling 150 m. Bore diameter 30 mm.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Separation solutions for constructions industry

    Today`s construction industry focuses a great deal on underground drilling and support systems. These processes typically use drilling fluid or slurry techniques. Packaged mud recycling systems are designed to minimize solids waste for disposal and effectively clean drilling fluid and slurry for active reuse. Foundation Drillers utilize drilling fluids for stability of holes during operation. Mud reclaimers process the used drilling fluid for continuous use downhole and creates less solids waste.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Solids Management Vertical Cuttings Dryers for Waste Solids Management

    In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite recovery” system. As noted in that report, when centrifuges are properly used, centrifuges enhance the drilling fluid properties, thereby improving rig performance. By maintaining the target propertie...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Drilling machines, underground mining & ditch machines for high pressure washing & intensifiers applications

    Hydraulic being available in underground mining is the most convenient source of power, whilst electricity is unavailable in any cases or unacceptable for safety reasons and compressed air presents problems at higher pressures.

    By Neron Pumps based in Ranica, ITALY.

  • Premium

    Sampling and drilling equipments for the mining industry

    AMS, Inc. has been a leading provider of high quality sampling equipment since 1942. AMS sampling equipment is primarily used for environmental, geotechnical, and remediation uses as well as soil, soil gas, and groundwater monitoring. In addition, AMS makes PowerProbe direct push/hollowstem auger drill rigs for environmental and geotechnical drilling activities. AMS also manufactures and offers direct push tooling, drilling equipment, accessories, and expendables for soil sampling, groundwater sampling and...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • Decanter centrifuge & cuttings for drilling waste management & disposal

    Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Horizontal Remediation Well Systems

    Horizontal wells are a proven and effective remedial technology for site cleanup. For environmental applications, horizontal wells offer several advantages in comparison to traditional vertical wells. The first horizontal wells were installed using a mid-sized directional drill rig in 1993 by Directional Technologies, Inc. The three (3) horizontal Soil Vapor Extraction wells installed at John F. Kennedy International Airport was the beginning of a new industry. Directional Technologies, Inc. founders transferred...

    By Directional Technologies, Inc. based in Miramar Beach, FLORIDA (USA).

  • Rugged Mobile Technology for Mining Industry

    The mining and drilling industry uses handheld computers to handle timekeeping, vehicle tracking, maintenance, supplies deliveries and real-time communication with the back office. The advantages over a paper-based system are obvious: data collectors greatly streamline job functions, data errors are reduced and labor costs are minimized. Mining and drilling naturally takes place in an extremely harsh environment, so the computer solution has to be tough enough to withstand challenges like vibrations, dust,...

    By Handheld Group AB based in Lidköping, SWEDEN.

  • Assembly lubricants for Construction industry

    P-80 Lubricants are used in the manufacturing and repair and maintenance of heavy-duty construction vehicles. Rubber assembly applications include bushings, leaf springs, chassis, and suspension components. P-80 Lubricants provide temporary lubrication to rubber or soft plastic parts.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Radiation monitoring instruments for the mining - drilling industry

    Mining - drilling.

    By Technical Associates based in Canoga Park, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you