Only show results available in Michigan? Ok

Drilling Fluids Applications

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Ceramic membranes and pressure vessels for environmental protection / waste water technology

    In waste water treatment systems our membranes are used with great success for the filtration of cleaning chemicals (surface treatment), for cell separation after biological processes, or for the recycling of paints and lacquers.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Premium

    Fibalon professional hotbox - Filtering of heating water in closed pipe systems

    FIBALON® tool has a highly durable special fiber. For the treatment of cooling lubricants, drilling fluids and abrasives, FIBALON® tool represents an innovative alternative compared to conventional systems such as cen-trifuges or belt filter systems. Heating water is water, which is located in a closed system. This flows through the boiler, where it is heated and finally reaches by means of pumps or gravity the radiator. The cooled heating water flows back to the boiler and the cycle begins again.The...

    By FIBALON GmbH based in Neumarkt/OPf., GERMANY.

  • Premium

    Industrial matter treatment for the recycling industry

    In Regards to applications in Recycling Area Pieralisi provides efficient solutions to treatment processes for Drilling Mud, Treatment and recycling of Industrial Fluids, recycling of Polymers and their respective recyclables, Recycling of services water in industrial processes and many other applications.

    By Pieralisi Group based in Jesi, ITALY.

  • Premium

    Vertical Cuttings Dryers for Waste Solids Management

    In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite recovery” system. As noted in that report, when centrifuges are properly used, centrifuges enhance the drilling fluid properties, thereby improving rig performance. By maintaining the target properties of the drilling fluid,...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Separation solutions for constructions industry

    Today`s construction industry focuses a great deal on underground drilling and support systems. These processes typically use drilling fluid or slurry techniques. Packaged mud recycling systems are designed to minimize solids waste for disposal and effectively clean drilling fluid and slurry for active reuse. Foundation Drillers utilize drilling fluids for stability of holes during operation. Mud reclaimers process the used drilling fluid for continuous use downhole and creates less solids waste.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Separation solutions for oil & gas industry

    Elgin Separation Solutions complete line of liquid / solid separation and dewatering equipment is fully compliant with all requirements for the oil & gas industry. Utilizing our closed loop technology project sites will be able to reclaim clean water and recovered drilling fluid that is cost effective and environmentally safe. Featuring shale shakers, decanter centrifuges, vertical cuttings dryers and dewatering systems.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Solids Control Centrifuges for Drilling Fluid Dewatering

    Saving Money, Time, and the Environment Through Chemistry A General Process Philosophy Description of Elgin’s Drilling Fluid Dewatering Systems. The drilling industry is regulated by a myriad of environmental regulations that protect our air, water, and land resources. As these regulations continue to evolve, so too must the technologies utilized by the drilling industry. Though lowering compliance costs is always a worthy initiative, incorporating technology that also enhances the drilling process by...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Premium

    Separation solutions for HDD / trenchless industry

    The HDD, trenchless and underground construction industry has realized the benefits and economics of recycling drilling fluid and slurry. With increased transportation costs and more stringent environmental enforcements and overall cost containment, the need for recycling is evident in all countries and across the range of trenchless applications. From maxi and mini HDD rigs to microtunneling and pipe jacking, packaged mud recycling units and mud reclaimers are an invaluable asset. The below diagram represents a...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Chlorine Dioxide Water Treatment for Oil and Gas Refinieries

    Injecting chlorine dioxide into a well is an established technique for removing sulphides and sulphates from oil and gas wells. CleanOxide Chlorine Dioxide is a practically pure solution of chlorine dioxide. It rapidly oxidises the naturally occurring iron compounds, and is also effective at breaking up and removing organic solids and added polymers.

    By NW Solutions based in Perth, AUSTRALIA.

  • Decanting centrifuges solutions for mining, tunneling & drilling fluids industries

    Mineral industry: Centrifuges are used all over the world to prepare mineral suspensions. Hiller decanters are ideally suited to hydrometallic processes, such the extraction of gold, silver or nickel. The processing of industrial minerals such as calcium carbonate, kaolin or titanium dioxide is also optimally carried out using Hiller technology. The dewatering and classification of mineral sludges is a complex issue, and requires special designs. Hiller high performance decanters have been developed and optimised...

    By Hiller GmbH based in Vilsbiburg, GERMANY.

  • Bio solutions for the marine construction sector

    A Perfect Blend of Compliance and Sustainability. Whether they are dredging, pile driving or building a seawall, the marine construction industry is seeing the future, and it is RSC Bio Solutions. Our RSC EnviroLogic and RSC SAFECARE series of readily biodegradable lubricants, cleaners and solvents comply with the ever-changing world of federal and local regulations—including the 2013 EPA Vessel General Permit (VGP). But we offer much more than mere compliance. As a leader, we owe you more. And we deliver....

    By RSC Bio Solutions based in Indian Trail, NORTH CAROLINA (USA).

  • Decanter centrifuge for mining & diamond drilling

    GNLW223 Series Mini Centrifuge is specially designed for small capacity, small footprint, and fine solids separation. It is designed to meet the drilling fluids recycling for mining drilling rigs especially for diamond drilling. The diamond drilling contract can choose to buy single centrifuge unit with electric drive fixed speed or VFD drive variable speed or even the Fully Hydraulic Drive. For the FHD drive Centrifuge, it can use the diesel engine to power the hydraulic pump to feed to the centrifuge without...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Membrane for Oil and Gas Field Wastewater Treatment

    CNPC African Chad oil field wastewater treatment project 600 m³/day, using our SUPER DiscTube RO module. Classical and charateristics of oil and gas field wastewater:

    By Chengdu Meifute Membrane Technology Co.,Ltd. based in Jinniu District, Chengdu, CHINA.

  • Solutions for oil exploration sector

    The oil is China`s important energy and chemical raw materials, has a pivotal position in the national economy. The polymer volume used for flooding the oil in China ranks first in the world, and China has become the world`s largest polymer flooding country. At present, the international crude oil price continues to rise, and meanwhile the countries take measures to stimulate crude oil exploitation. EOR will be the core flooding technology to Polyacrylamide oilfield-led development and enters a period of rapid...

    By Anhui Jucheng Fine Chemicals Co., Ltd. based in Huaibei, CHINA.

  • Environmental solution for the drilling industry

    Reduce Torque and drag. Encapsulate and remove drill cuttings. Increase rate of penetration. Lubricate drilling rod. Improve core recovery. Stabilize borehole and casing in overburden and sandy formation. Reduce vibration of drilling rod. Plug pill, minimize water loss. Environmental and Ecological Anti-Freeze drilling fluid.

    By Chemco, Inc. based in Saint-Augustin-de-Desmaures, QUEBEC (CANADA).

  • Building & construction technology solutions for drilling industry

    The leading supplier of drilling products in North America. Our complete line of professional products are specially designed to enhance the cost-effectiveness of drilling operations by controlling and improving drilling fluid properties. Each and every drilling product is supported by our experienced team of field engineers and research scientists.

    By CETCO based in Kings Norton, UNITED KINGDOM.

  • Decanter centrifuge for drilling mud solids control

    Decanter centrifuge is used as the 4th phase solids control equipment after shaker, desander and desilter. The centrifuge suck the mud from the compartment receiving the discharge from the desilters and mud cleaners, and the returned stream is directed to the next compartment downstream. The use of decanter centrifuge with the drilling mud is (1) removal fine solids from unweighted fluids (2) selection separation of colloidal and ultra-fine solids from weighted fluids to improve their...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Decanter centrifuge & cuttings for drilling waste management & disposal

    Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you