Drilling Mud Applications

15 Results found
Only show results available in Virginia?
OK
  • Category: Soil & Groundwater ×

  • Subcategory: Drilling Mud ×

Pumping solutions for marine

by Hydro Prokav Pumps (India) Pvt. Ltd.     based in Sidco, INDIA

Fluids Handled - Fuel-injection, Oil burners, Boosting, Hydraulics, Fuel, Lubrication, Circulating and Feed Pumping.

Measurement of C1-C5 with carbon dioxide for oil & gas exploration.

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons and Carbon Dioxide required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented. Then a third column is used in conjunction with a second 10-port valve for individual analysis of methane. C1-C5 hydrocarbons are separated on the analytical column and elute to the flame ionization detector (FID) for analysis.

Eliminating the Environmental foot print for Offshore and On shore oil rigs

by OSEI - Oil Spill Eater International, Corp     based in Dallas, TEXAS (USA)

OSE II ELIMINATING THE ENVIRONMENTAL FOOT PRINT WHILE REDUCING COSTS ASSOCIATED WITH DRILLING MUD, DRILLING MUD CLEAN UP, RIG WASHING, RIG OPERATIONS AND EMERGENCY OIL SPILL RESPONSE FROM OIL RIGS

Decanter centrifuge for mining & diamond drilling

by GN Decanter Centrifuge Ltd     based in Hebei, CHINA

GNLW223 Series Mini Centrifuge is specially designed for small capacity, small footprint, and fine solids separation. It is designed to meet the drilling fluids recycling for mining drilling rigs especially for diamond drilling. The diamond drilling contract can choose to buy single centrifuge unit with electric drive fixed speed or VFD drive variable speed or even the Fully Hydraulic Drive. For the FHD drive Centrifuge, it can use the diesel engine to power the hydraulic pump to feed to the centrifuge without any electric. GN also has the completed tank system with Mini Shaker for option!

Salt Water Disposal - Operational improvements and savings

by Hudson Industries     based in Vienna, OHIO (USA)

Adding Wilsa ElectroWaveTM technology to existing separation equipment at Salt Water Disposal Wells (SWD) or Salt Water Injection Wells (SWIW) has a profound impact on the amount of oil can be recovered without using chemicals. Additionally there is a host of operational improvements and savings that result from the Wilsa Effect. Oil free solids settle out faster for cleaner, clearer brine for injection. Cleaner brine means less injection pressure and fewer acid jobs in the formation. Pump packings last longer by reducing solids and abrasive elements from the brine. More targeted solids settling allows for less tank clean outs. All of this adds up to significant operational savings.

Pulsair`s industrial drilling mud agitators for oil & gas industry

by Pulsair Systems, Inc     based in Bellevue, WASHINGTON (USA)

Industrial drilling mud agitators and mixing equipment for oil & gas exploration. Pulsair Systems supplies oil & gas operators with industrial drilling mud mixer agitators for mud tank mixing. The Pulsair mixing process quickly allows drillers and operators to ensure homogenous mud consistency for their drilling mud needs.

Industry

by Dragflow S.r.l.     based in Villafranca, ITALY

Dragflow is a world leader in slurry pumping solutions. Dragflow pumps can handle all slurry from dirty water to the very heavy slurries with solid concentration up to 70% by weigh. Thanks to its twenty five and more years of experience in the most difficult pumping application Dragflow is able to satisfy the most demanding customer in the industrial and construction market.

Air pollution control for the natural gas processing industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

The natural gas industry has seen a significant increase in activity with the discovery of new shales located throughout the world. The development of advance drilling technologies allow for extraction of gases deeper in the earth, revolutionizing the industry while creating a new demand for air and water pollution control technologies.

Decanter centrifuge for drilling mud solids control

by GN Decanter Centrifuge Ltd     based in Hebei, CHINA

Decanter centrifuge is used as the 4th phase solids control equipment after shaker, desander and desilter. The centrifuge suck the mud from the compartment receiving the discharge from the desilters and mud cleaners, and the returned stream is directed to the next compartment downstream. The use of decanter centrifuge with the drilling mud is (1) removal fine solids from unweighted fluids (2) selection separation of colloidal and ultra-fine solids from weighted fluids to improve their flow properties.

Drill pipe cleaning

by NLB Corp.     based in Wixom, MICHIGAN (USA)

Problem: When scale and hardened mud build up in oil well drill pipe, plugged drill heads are the usual result. This reduces efficiency and increases downtime. Traditional rattle-and-brush systems can leave some build-up behind and require a rinse operation to flush debris and drilling fluids.

Measurement of C1-C5 hydrocarbons for oil & gas exploration.

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented. C1-C5 hydrocarbons are separated on the analytical column and elute to the flame ionization detector (FID) for analysis.

Industrial matter treatment for the recycling industry

by Pieralisi Group     based in Jesi, ITALY

In Regards to applications in Recycling Area Pieralisi provides efficient solutions to treatment processes for Drilling Mud, Treatment and recycling of Industrial Fluids, recycling of Polymers and their respective recyclables, Recycling of services water in industrial processes and many other applications.

Fast C1 to C5 - PetroAlert Series 9100

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

Absolute separation for the recycling sector

by Vitone Eco S.r.l.     based in Bitonto, ITALY

In the whole production waste, a great part is represented by those of industrial origin. As far as the correct handling of them, VITONE ECO offers complete solutions, as far as dehydration of drilling muds, recycling of water in different processes in chemical, pharmaceutical and biotechnological sectors and in the processes of ore-mining and production of metals.

Need help finding the right suppliers?

Let the XPRTs do the work for you