Only show results available in Virginia? Ok

Drilling Waste Applications

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.<...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Industrial matter treatment for the recycling industry

    In Regards to applications in Recycling Area Pieralisi provides efficient solutions to treatment processes for Drilling Mud, Treatment and recycling of Industrial Fluids, recycling of Polymers and their respective recyclables, Recycling of services water in industrial processes and many other applications.

    By Pieralisi Group based in Jesi, ITALY.

  • Premium

    Albin peristaltic`s pumps for chemical industry

    Pumping / transfert / dosing various acids, PVDF latex, alcohol, soap, non aromatic solvents, acids, alkalis, suspensions, stabilizers, glue, crude oil, solvents, heavy oils, cleaning of petroleum sludge food industry, in drilling plants.

    By Albin Pump SAS based in Montelimar, FRANCE.

  • Premium

    Centrifuges for industrial waste water, minerals and oil industry

    Residues containing oil are created wherever oil is extracted or processed. Flottweg decanters, Tricanter, separators and systems offer an environmentally friendly solution to the following applications in the processing industry: Processing of sand washing water and gravel wash water. Cleaning wastewater and exhaust gases in steelworks. Cleaning and processing of tar in coking plants. Processing of wastewater containing oil. Processing of oil sludge from ponds and lagoons. Processing of residues containing...

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Drill Cuttings Remediation

    With a VulcanĀ® Systems Thermal Desorption Unit, Hydrocarbons are separated from the solids in the sludge. The treated solids have little to no residual hydrocarbons, resulting in an end product that can be disposed of easily and cost-effectively. What makes our equipment unique? The ability to recover diesel or oil in a way which maximizes the resaleability of use as a fuel.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Pulsair`s industrial drilling mud agitators for oil & gas industry

    Industrial drilling mud agitators and mixing equipment for oil & gas exploration. Pulsair Systems supplies oil & gas operators with industrial drilling mud mixer agitators for mud tank mixing. The Pulsair mixing process quickly allows drillers and operators to ensure homogenous mud consistency for their drilling mud needs.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Separation solutions for dredging industry

    Dredging is the process of removing organic and/or inorganic sediment from the bottom of shallow water bodies in order to economically dispose of those sediments and/or have them repurposed for land farming or construction purposes. Elgin Separation Solutions manufactures effective solid recycling systems capable of handling high flow capacity. Elgin`s linear motion shakers have the largest screening surface area on the market. In addition, we have complete desilter and desander hydrocyclone manifolds incorporat...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Industry

    Dragflow is a world leader in slurry pumping solutions. Dragflow pumps can handle all slurry from dirty water to the very heavy slurries with solid concentration up to 70% by weigh. Thanks to its twenty five and more years of experience in the most difficult pumping application Dragflow is able to satisfy the most demanding customer in the industrial and construction market.

    By Dragflow S.r.l. based in Villafranca, ITALY.

  • Cavity pump for mining industry

    The demanding mining industry requires a lot from its progressing cavity pumps. A large range of media needs to be pumped with a variety of viscosity levels that can be highly abrasive. Media pumped include mineral slurries, thickened sludges, waste water, and drilling muds.  Moyno progressing cavity pumps meet the demands of the mining industry.

    By Moyno, Inc. based in Springfield, OHIO (USA).

  • Separation solutions for constructions industry

    Today`s construction industry focuses a great deal on underground drilling and support systems. These processes typically use drilling fluid or slurry techniques. Packaged mud recycling systems are designed to minimize solids waste for disposal and effectively clean drilling fluid and slurry for active reuse.  Foundation Drillers utilize drilling fluids for stability of holes during operation. Mud reclaimers process the used drilling fluid for continuous use downhole and creates less solids waste.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Recycling Solutions for the chemical and petrochemical industries

    ANDRITZ gives you access to a comprehensive range of technologies for solid/liquid separation, drying, and automation solutions for chemical processing applications. The systems are specifically designed to achieve product purity and plant safety in the most demanding applications. The chemical and petrochemical industries require durable, safe, and efficient technology solutions which place unique demands on suppliers. Whether the application is for chemicals, petrochemicals, pharmaceuticals, coating pigments,...

    By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY.

  • Separation solutions for oil & gas industry

    Elgin Separation Solutions complete line of liquid / solid separation and dewatering equipment is fully compliant with all requirements for the oil & gas industry. Utilizing our closed loop technology project sites will be able to reclaim clean water and recovered drilling fluid that is cost effective and environmentally safe. Featuring shale shakers, decanter centrifuges, vertical cuttings dryers and dewatering systems.

    By Elgin Separation Solutions based in Stafford, TEXAS (USA).

  • Decanter centrifuge & cuttings for drilling waste management & disposal

    Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Wastewater pretreatment solutions for oil and gas

    Produced Water. Flowback Water from Hydraulic Fracturing. Oil Refineries. Waste Oil Processing Facilities. Frac Water. Onshore and Offshore Drilling Operations. Vehicle and Equipment Washing.

    By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA).

  • Decanter centrifuge for drilling mud solids control

    Decanter centrifuge is used as the 4th phase solids control equipment after shaker, desander and desilter. The centrifuge suck the mud from the compartment receiving the discharge from the desilters and mud cleaners, and the returned stream is directed to the next compartment downstream. The use of decanter centrifuge with the drilling mud is (1) removal fine solids from unweighted fluids (2) selection separation of colloidal and ultra-fine solids from weighted fluids to improve their...

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Pumping solutions for offshore liquid ring pump systems

    In offshore drilling, the safety of both people and the environment is dependent on the constant management of risk. With great public concern and media attention, the safety of offshore drilling for both people and environment, has been widely discussed for many years. Offshore drilling can potentially cause oil spills or disposal of other waste into the ocean, impacting human life and marine life.

    By Samson Pumps A/S based in Viborg, DENMARK.

  • Absolute separation for the recycling sector

    In the whole production waste, a great part is represented by those of industrial origin. As far as the correct handling of them, VITONE ECO offers complete solutions, as far as dehydration of drilling muds, recycling of water in different processes in chemical, pharmaceutical and biotechnological sectors and in the processes of ore-mining and production of metals.

    By Vitone Eco S.r.l. based in Bitonto, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you