Environmental Drilling Applications

20 Results found
Only show results in Virginia?
OK
  • Category: Soil & Groundwater ×

  • Subcategory: Environmental Drilling ×

Video Inspection of Drilled Shafts, Piers, Caissons

by Allegheny Instruments, Inc.     based in Williamsville, VIRGINIA (USA)

Allegheny Instrument's GeoVISION borehole video camera inspection systems are used to visually inspect drilled shafts, caissons, piers. Downward view, side view, and pan and tilt options.

Mobile Sewage Treatment for the Oil and Gas Industry

by Nomadic Systems     based in Langley, BRITISH COLUMBIA (CANADA)

Due to the continued growth in the oil & gas industry, we are seeing an increased demand for mobile sewage treatment solutions for oil exploration and drilling rigs in remote locations.

Residential and Commercial, Underground Thermal Energy Storage

by Boode Waterwell Systems     based in Zevenhuizen, NETHERLANDS

PROJECT OVERVIEW: Large residential and commercial project in London, overlooking the Thames. A 2.9MW cooling and heating aquifer thermal energy storage system for five mixed-use buildings including over 200 luxury apartments.

Drill Cuttings

by econ industries GmbH     based in Starnberg, GERMANY

Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the drill cuttings. Our VacuDry® technology is designed to safely separate oil, water and mercury from the solids (including NORM), allowing reuse of the oil and safe disposal of the water, mercury, solids and NORM. Find more information and the benefits of VacuDry® drill cuttings plants on http://www.econindustries.com/applications/drill-cuttings

Eliminating the Environmental foot print for Offshore and On shore oil rigs

by OSEI - Oil Spill Eater International, Corp     based in Dallas, TEXAS (USA)

OSE II ELIMINATING THE ENVIRONMENTAL FOOT PRINT WHILE REDUCING COSTS ASSOCIATED WITH DRILLING MUD, DRILLING MUD CLEAN UP, RIG WASHING, RIG OPERATIONS AND EMERGENCY OIL SPILL RESPONSE FROM OIL RIGS

Site investigation for horizontal drilling

by Advanced Geosciences, Inc.     based in Austin, TEXAS (USA)

Site investigation for horizontal drilling.

Oil & Gas Exploration and Pipeline Imaging

by GeoVantage     based in Peabody, MASSACHUSETTS (USA)

Exploration and Pipeline Imaging

GeoVantage specializes in custom imaging of basins for oil & gas exploration for up to date assessment of drilling activity and logistics. Large tracks of land, at 6 inch or 1 foot resolution, ensure that exploration companies know exactly what is happening in key regions of their lease holds and even those surrounding.

For pipelines, GeoVantage offers quick, efficient capture of intricate pipeline layouts across all of North America and other countries. To ensure timely service, both large and small captures can be collected by a large group of sensors deployed in multiple places.

Oil and Gas Pipeline Imaging and Class Analysis

GeoVantage works closely with firms that specialize in Oil and Gas Pipeline imaging and class analysis. GIS Data Specialists (GDS) is one of those firms. GDS is able to take the GeoVantage high resolution imagery and output the information needed to comply with regulatory or company requirements for reporting.



Offshore Oil Drilling and Production Project

by Boode Waterwell Systems     based in Zevenhuizen, NETHERLANDS

PROJECT OVERVIEW: The re-lining of 12 seawater supply wells to a depth of 45 metres with Boode Select PVC screen and casing. The supply wells support an offshore oil drilling and production platform and were re-lined following the failure of existing stainless steel screen and casing due to sand ingress and corrosion.

Alkane (hydrocarbon) gas measurement for mudlogging in oil & gas drilling rigs

by MKS Instruments, Inc.     based in Andover, MASSACHUSETTS (USA)

The need for operator and maintainance intensive gas chromatograph (GC) analyzers was eliminated. Customer can now deploy all-optical, unattended sensor system for monitoring the composition of hydrocarbon gases (C1-C5) exiting the well bore which provides crucial information about the drilling formation that would save time and money.

Pulsair`s industrial drilling mud agitators for oil & gas industry

by Pulsair Systems, Inc     based in Bellevue, WASHINGTON (USA)

Industrial drilling mud agitators and mixing equipment for oil & gas exploration. Pulsair Systems supplies oil & gas operators with industrial drilling mud mixer agitators for mud tank mixing. The Pulsair mixing process quickly allows drillers and operators to ensure homogenous mud consistency for their drilling mud needs.

Agitation and mixing solutions for oil & gas

by National Oilwell Varco     based in Dayton, OHIO (USA)

The two main areas in the oil and gas market are upstream operations such as exploration, recovery, storage, and transfer and downstream refining operations.  Exploration for oil and gas includes offshore drilling rigs and land rigs.  Downstream production includes the cracking of oil into transportation and fuel products and a variety of petrochemicals.

Ground Penetrating Radars (GPR) for Roads and Bridges Construction

by Transient Technologies LLC     based in Kyiv, UKRAINE

The roads and bridges construction and repair demand of careful investigation of road surfacing state, quality of used concrete and geological assessment of ground structure under roads to find any heterogeneity. GPRs can be applied here for: tunnels, road surface thickness measure, runways state assessment. The important advantage of GPRs using – quick road surface assessment.

Cavity pump for oil and gas industry

by Moyno, Inc.     based in Springfield, OHIO (USA)

Moyno Pumps are currently being used in all segments of the Oil and Gas market from the North Slope region in Alaska to the Gulf of Mexico and beyond. The Oil and Gas industry encompasses all of the steps involved in finding, producing, transporting and marketing oil and natural gas.

Decanter centrifuge & cuttings for drilling waste management & disposal

by GN Decanter Centrifuge Ltd     based in Hebei, CHINA

Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud circulation system. GN offer a complete package of drilling waste management tank system as well.

Drill pipe cleaning

by NLB Corp.     based in Wixom, MICHIGAN (USA)

Problem: When scale and hardened mud build up in oil well drill pipe, plugged drill heads are the usual result. This reduces efficiency and increases downtime. Traditional rattle-and-brush systems can leave some build-up behind and require a rinse operation to flush debris and drilling fluids.

Sampling and drilling equipments for the environmental industry

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

Environmental consultants, engineering firms, and researchers in the environmental industry use AMS products for a variety of sampling, testing, and monitoring needs.

Sampling and drilling equipments for the pest control industry

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

AMS, Inc. offers installation equipment for bait station and monitoring stations for the pest management technician who wants the ultimate fit and finish.

Air and particule sampling for the oil and gas industries

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

Ormantine offers a wide range of products and services to meet the array of different needs that arise in the oil and gas industries. Volatile Organic Compounds (VOCs), benzene, and other compounds are released during drilling, hydraulic fracturing (fracking) and other extraction procedures. Monitor NOx emissions from heavy duty equipment, particulate matter, and ground level ozone, the formation of which is contributed to by VOCs from processing, transportation, and storage of oil and gas.

Industrial matter treatment for the recycling industry

by Pieralisi Group     based in Jesi, ITALY

In Regards to applications in Recycling Area Pieralisi provides efficient solutions to treatment processes for Drilling Mud, Treatment and recycling of Industrial Fluids, recycling of Polymers and their respective recyclables, Recycling of services water in industrial processes and many other applications.

Need help finding the right suppliers?

Let the XPRTs do the work for you