Geotechnical Solutions Applications

20 Results found
Only show results in Virginia?
OK
  • Category: Soil & Groundwater ×

  • Subcategory: Geotechnical Solutions ×

Video Inspection of Drilled Shafts, Piers, Caissons

by Allegheny Instruments, Inc.     based in Williamsville, VIRGINIA (USA)

Allegheny Instrument's GeoVISION borehole video camera inspection systems are used to visually inspect drilled shafts, caissons, piers. Downward view, side view, and pan and tilt options.

Soil Stabilization

by Geo Products, L.L.C. - EnviroGrid Cellular Confinement (Geocell)     based in Houston, TEXAS (USA)

Problem: Poor load-bearing soils pose a significant problem for transportation and construction needs. Unpaved areas, such as access roads, paths, parking lots, driveways, etc can be highly vulnerable to near-surface shear failure and rutting, especially in moist conditions or areas with higher expected loads. Typically, engineers bridge over weak soils with rigid structures such as thick, reinforced concrete for roads and highways. However, such techniques are prohibitively expensive and inordinately difficult to install. The poorer the quality of the sub-base and the heavier the expected loads, the greater the amount and better the quality of support required.

Tunnels

by Manas Geo Tech India Pvt. Ltd.     based in New Delhi, INDIA

The geotextile performs two primary functions when used in the construction of tunnels:- 1. Protection of the linear from abrasion and puncture by protrusions from the base surface of the tunnel well. 2.Drainage of water seeping through the rock and sprayed concrete layer. The in-plane oermeability of the geotextile enables the water to flow to a subsurface drainage collection system. where it is directed awa from the tunne

manufactuer of geophysical exploration equipment

by ST Geomative Co., Ltd     based in shenzhen, CHINA

Resources Prospecting - Underground water detection - Geothermal prospecting - Energy resource prospecting - Metal and nonmetal mineral resources survey Engineering Geology Exploration - City engineering exploration - Cave exploration - Pile foundation Environment Detection - Underground pollutant change detection - Seawater Intrusion Detection - Dam Detection - Underground tank leak detection - Slope failure detection Others - Geological mapping - Archaeology - Drilling/cross hole detection

Sampling and drilling equipments for the mining industry

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

AMS, Inc. has been a leading provider of high quality sampling equipment since 1942. AMS sampling equipment is primarily used for environmental, geotechnical, and remediation uses as well as soil, soil gas, and groundwater monitoring. In addition, AMS makes PowerProbe direct push/hollowstem auger drill rigs for environmental and geotechnical drilling activities. AMS also manufactures and offers direct push tooling, drilling equipment, accessories, and expendables for soil sampling, groundwater sampling and monitoring well installations.

Site investigation for horizontal drilling

by Advanced Geosciences, Inc.     based in Austin, TEXAS (USA)

Site investigation for horizontal drilling.

Site investigation for tunneling operation

by Advanced Geosciences, Inc.     based in Austin, TEXAS (USA)

Site investigation for tunneling operation

Fracture and cavity detection in bedrock

by Advanced Geosciences, Inc.     based in Austin, TEXAS (USA)

Fracture and cavity detection in bedrock.

Retaining Wall Construction

by Geo Products, L.L.C. - EnviroGrid Cellular Confinement (Geocell)     based in Houston, TEXAS (USA)

Problem: Retaining Wall structures are growing ever more necessary as construction is forced to deal with rough terrain, steep slopes, and embankment reinforcement. Changes-in-grade present obstacles for roads and other development requiring flatter, more usable land. Most current types of retaining walls are made of cast-in-place, steel-reinforced concrete walls whose virtue is based entirely upon its internal strength and rigidity. However, these cantilever walls are expensive, vulnerable to cracking from high stress situations, and unattractive in the environment.

Geotechnical Monitoring Systems for Health Monitoring

by Roctest - part of Nova Metrix LLC     based in Saint-Lambert, QUEBEC (CANADA)

The management of a geotechnical project requires a wide range of important information coming from the sensors, which are of vital importance for correct execution of construction plans and to refine soil models.

Geotechnical Applications

by Westbay Instruments     based in Burnaby, BRITISH COLUMBIA (CANADA)

Pore pressure variability and control is one of the most significant aspects of Geotechnical Engineering practice related to slope stability, underground openings, foundation of heavy structures, and water retention facilities. Pore pressure effects are most often controlled by natural small-scale hydrogeologic details. Characterization and management of pore pressures requires closely-arrayed repeated measurements to determine the effects of these details for design of appropriate mitigation measures, for performance monitoring and control of the selected mitigation measure. Since the late 1970’s the Westbay System has been used on some of the largest landslide studies in the world.

Geophysical resistivity and IP imaging for archeological studies

by Advanced Geosciences, Inc.     based in Austin, TEXAS (USA)

Geophysical resistivity and IP imaging for archeological studies.

Site characterization for development

by Advanced Geosciences, Inc.     based in Austin, TEXAS (USA)

Site characterization for development.

Borehole to borehole and borehole to surface tomography imaging

by Advanced Geosciences, Inc.     based in Austin, TEXAS (USA)

Borehole to borehole and borehole to surface tomography imaging.

Geophysical resistivity and IP imaging for construction site investigations

by Advanced Geosciences, Inc.     based in Austin, TEXAS (USA)

Geophysical resistivity and IP imaging for construction site investigations.

Water Containment

by Manas Geo Tech India Pvt. Ltd.     based in New Delhi, INDIA

Polymeric liners are prone to puncture by inclusions within the underlying soil. Thick, non-woven geotextile can be used to give protection to liners during installation. Often the upper slopes are exposed to damage and it is a good practice to cover these areas with a depth of soil which will sustain vegetation. Alternatively, a stone or concrete substance can be used to achieve a hard landscaped appearance. Our product will protect the liner from puncture whilst also providing a degree of slope stability.

Data analysis and visualization tools for geophysical analysis

by C Tech Development Corporation     based in Henderson, NEVADA (USA)

EVS, MVS, and EnterVol excel in their ability to handle analysis and visualization of geophysical data. For example, 3D resistivity can be analyzed from 2D ground arrays and airborne surveys. Electrical resistivity surveys offer the ability to inexpensively collect vast quantities of three-dimensional subsurface data. Environmental sciences, mining, archaeology and many other disciplines can benefit from these measurement techniques. However, their large irregular datasets offer significant challenges related to analysis and visualization. C Tech’s EVS , MVS, and EnterVol excel in their ability to address these complex issues.

Process design & engineering services for water treatment industry

by Proxion Process     based in Manchester, UNITED KINGDOM

Waste water is any water that has been adversely affected in quality by anthropogenic influence. Municipal wastewater is usually conveyed in a combined sewer or sanitary sewer, and treated at a wastewater treatment plant or septic. Treated wastewater is discharged into receiving water via an effluent sewer.

Sand and gravel exploration

by Advanced Geosciences, Inc.     based in Austin, TEXAS (USA)

Sand and gravel exploration.

Geophysical resistivity and IP imaging for geotechnical investigations

by Advanced Geosciences, Inc.     based in Austin, TEXAS (USA)

Geophysical resistivity and IP imaging for geotechnical investigations.

Need help finding the right suppliers?

Let the XPRTs do the work for you