Only show results in Massachusetts? Ok

Geotechnical Solutions equipment for Soil and Groundwater

  • GT 40-1

    GT Series (Geotechnical Series). All of these products will fit bar and pipe ranging from 18mm (0.79') to 65mm (2.55') and therefore ideally suited for: rock bolts. soil nails. small diameter drop pipes and colums. down hole cameras. No special tools are required to install the GT Series that are manufactured from a high grade engineering plastic ...

    By kwik-ZIP Centralizers based in Bunbury, AUSTRALIA.

  • Pagani - Model DP - Penetrometrice Dynamic Tests

    Pagani Geotechnical Equipment Penetrometers allows the dynamic driving of cones and rods according to the International Standard Procedures.

    By Pagani Geotechnical Equipment s.r.l. based in Calendasco, ITALY. from Penetrometrice Dynamic Tests Product line

  • Measuring Tube for Sliding Micrometer

    The Sliding Micrometer measuring line is given by the measuring tube installed in soil, rock or a structure. The measuring tubes consist of telescopic couplings and connecting tubes. Standard connecting tubes, depending on the problem under investigation, consist of ABS or HPVC. Optionally, the connection between the teles- copic coupling and the ...

    By Solexperts AG based in Mönchaltorf, SWITZERLAND. from Measuring Tube for Sliding Micrometer Product line

  • Geonor - Model P-520N - Vibrating Wire Frequency Counter Unit for Geotechnical Purposes

    The P-520N frequency counter is the read-out instrument for all GEONOR vibrating-wire transducers. The counter is designed for use in situ and is enclosed in a rigid aluminium housing. The display shows the frequency of vibration in 0.1 Hz. which has to be calculated to physical units using a calibration table. It is powered by a rechargeable 12 V ...

    By Geonor AS based in Østerås, NORWAY. from Vibrating Wire Frequency Counter Unit for Geotechnical Purposes Product line

  • Portable Distometer

    The portable distometer measures changes in distance very accurately and is mainly used in tunnelling. For this method an invar steel wire is stretched at a given force between measuring bolts and the relative length of the wire is measured. By obtaining the difference between the measurements at two points in time, the change in displacement ...

    By Solexperts AG based in Mönchaltorf, SWITZERLAND. from Portable Distometer Product line

  • Rockfall Catch Fence & Drapery Systems

    IGOR Paramassi is an Italian company with manufacturing plants throughout the world including Belgium and New York. Being pioneers in an industry can mean taking years of trial and error, along with a lot of money spent before seeing fruition. Because IGOR Paramassi are such a pioneer in the rockfall netting industry, we have the ...

    By Fieldwork Group based in Westport, NEW ZEALAND. from Rockfall Catch Fence & Drapery Systems Product line

  • N&N - Core Barrels

    N&N Drilling manufactures a wide assortment of Core Barrels for geotechnical and mineral exploration applications. Our Core Barrels are manufactured using the tightest tolerances to ensure safe, efficient operation as well as a high rate of core sample recovery.

    By N&N Drilling Supply Mfr. based in Jessup, PENNSYLVANIA (USA).

  • Pagani - Model TGAS07B - CPTu Touchscreen Digital Acquisition System

    To satisfy the growing demand for a strong and easyto-use CPTu system, Pagani Geotechnical Equipment designed a new touchscreen CPTu acquisition unit that can be used outdoor with any weather condition. Our touchscreen digital acquisition system TGAS07 simplifies and speeds up the procedure of acquisition without the need for a notebook. ...

  • Ruen - Model BK 66 - Truck Mounted Geotechnical Drill

    This unit is capable of geotechnical augering and coring. It is complete with auto hammer, three winches, hydraulic powered Bean 35 water pump, and Moyno mud pump. This machine has 6600-ft. lbs. of torque.

    By Ruen Drilling International, Inc. based in Clark Fork, IDAHO (USA).

  • Black Diamond - Model D750-100/200 - Tiltmeter

    The D750-100/200 Tiltmeter Series is the digital version of the Black Diamond Tiltmeter sensor line for geotechnical measurement. It includes a 0.001° and an industry standard RS485 digital output signal.

    By Jewell Instruments LLC based in Manchester, NEW HAMPSHIRE (USA). from Tiltmeter Product line

  • Anti-Seep Collars/Plugs

    Traditionally, “anti-seep collars” made of a variety of materials (rubber, PVC, plastics, etc.) have been recommended and installed as impermeable diaphragms that encircle the pipe. While these structures are intended and often do prevent wash-out, uniform compaction of the soil around the collar can be difficult or impossible, ...

    By AquaBlok, Ltd. based in Swanton, OHIO (USA). from Anti-Seep Collars/Plugs Product line

  • Clino - Measuring Stations

    Clino is used where inclination changes in structural components have to be measured precisely. The measurements can be done automatically or by remote control. Clino measuring stations are often used in tunnelling to measure displacements during the construction of the tunnel. Clino measuring stations are also used on railways sleepers or other ...

    By Solexperts AG based in Mönchaltorf, SWITZERLAND. from Measuring Stations Product line

  • Multidrill - Model PL - Geotechnical Drilling Rigs

    MULTIDRILL PL A - PL V - PL G is compact and agile; perfect for Foundations, Micropiles, Anchoring, Tie piles, Restorations, Geotechnical applications, Soil investigations, Diamond coring, Small-Medium Water wells.  Main frame with: strong structure for components assembly with four hydraulic stabilizers; it includes the most advanced and ...

    By Fraste S.p.A. based in NOGARA (VR), ITALY. from Geotechnical Drilling Rigs Product line

  • Geotechnical Service

    Geotechnical site characterization plays an important role in site selection and project design, and can help identify and avoid construction delays and costly changes. SAGEprovides the geotechnical engineering services required for the design and construction of new facilities, and evaluation and repair of existing facilities. Our ...

    By SAGE Engineers, Inc. based in Roseville, CALIFORNIA (USA).

  • Fraste Multidrill - Model SL - Geotechnical Drilling Rigs

    FRASTE MULTIDRILL SL G - SL P * new – flexible – compact Geotechnical jobs – SPT Probes – Small water wells – Soil testing. The new MULTIDRILL SL is available in two different versions: - SL G for geotechnical applications and small water wells - SL P for SPT probes (Standard Penetration Test) LS hydraulic system and ...

    By Fraste S.p.A. based in NOGARA (VR), ITALY. from Geotechnical Drilling Rigs Product line

  • Ruen - Model BK 51 - Track Mounted Geotechnical Drill

    This unit is capable of geotechnical augering and coring. It is complete with auto hammer, three winches, hydraulic powered Bean 35 water pump, and Moyno mud pump. This machine has 5100-ft. lbs. of torque. It can be track, skid, or truck mounted.

    By Ruen Drilling International, Inc. based in Clark Fork, IDAHO (USA).

  • Black Diamond - Model 750-050 - Tiltmeter

    The A750-050 tiltmeter series is a low-cost, high precision tilt sensor designed with higher accuracy than most comparable MEMS devices. It is meant for geotechnical applications such as bridge sag and sway deflection measurement, platform leveling and structural analysis. All 750-050 tiltmeters are RoHS compliant.

    By Jewell Instruments LLC based in Manchester, NEW HAMPSHIRE (USA). from Tiltmeter Product line

  • Black Diamond - Model 750-200 - Tiltmeter

    The 750-200 Series Tiltmeter is a rugged, shock and vibration resistant, dual-axis tilt sensor designed for geotechnical applications. It is available in a small, convenient package and offers the options of 0-5Vdc or 4-20mA output signals.

    By Jewell Instruments LLC based in Manchester, NEW HAMPSHIRE (USA). from Tiltmeter Product line

  • GT 20-1

    GT Series (Geotechnical Series). All of these products will fit bar and pipe ranging from 18mm (0.79') to 65mm (2.55') and therefore ideally suited for: rock bolts. soil nails. small diameter drop pipes and colums. down hole cameras. No special tools are required to install the GT Series that are manufactured from a high grade engineering plastic ...

    By kwik-ZIP Centralizers based in Bunbury, AUSTRALIA.

  • GT 30-1

    GT Series (Geotechnical Series). All of these products will fit bar and pipe ranging from 18mm (0.79') to 65mm (2.55') and therefore ideally suited for: rock bolts. soil nails. small diameter drop pipes and colums. down hole cameras. No special tools are required to install the GT Series that are manufactured from a high grade engineering plastic ...

    By kwik-ZIP Centralizers based in Bunbury, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you