Only show results in Connecticut? Ok

Geotechnical Solutions services for Soil and Groundwater

  • Premium

    Synthetic Rock Mass Services

    Obtaining accurate rock mass strengths requires an understanding of the intact rock and joint properties of each geotechnical unit and the in-situ stress state. To estimate rock mass strengths, Itasca uses the full gamut of engineering approaches, including analytical, empirical, and numerical modeling approaches.

    By Itasca International, Inc based in Minneapolis, MINNESOTA (USA). from Engineering - Site Characterization and Investigation Service line

  • Premium

    Open Pit Mine Design Services

    Itasca specializes in the assessment of slope stability and design of pit slopes on bench, inter-ramp, and global mine scales. Itasca performs slope, instrumentation, and remediation design at many of the world’s largest open pit mines. Expertise in slope stability is not limited to open pit slopes. The company also routinely analyzes the ...

    By Itasca International, Inc based in Minneapolis, MINNESOTA (USA). from Mining Service line

  • Premium

    Tailings Dams Services

    Tailings dams are among the largest and most critical artificial structures in the world. Their analysis requires careful evaluation of all components and loading conditions. Itasca has performed detailed design and stability analyses for major tailing dams. Each analysis has been reviewed by experts representing governing authorities.

    By Itasca International, Inc based in Minneapolis, MINNESOTA (USA). from Mining Service line

  • Premium

    Slope Stability Services

    Itasca is particularly well-known for examining complex problems involving slope instabilities in soil and rock. One specialty is assessment of slope stability and design on scales ranging from civil engineering slopes in soil and rock, including portals, to mine benches and inter-ramps for many of the world’s largest open-pit mines. Another ...

    By Itasca International, Inc based in Minneapolis, MINNESOTA (USA). from Consulting - Civil Engineering Service line

  • Site Investigation

    LBH WEMBLEY Geotechnical & Environmental will design the optimum programme of site investigation for any project. Our investigations are properly designed to meet the often conflicting demands of geotechnical and contaminated land issues. We provide a complete range of exploratory techniques, including both intrusive and non-intrusive ...

    By LBH WEMBLEY Geotechnical & Environmental based in Buckingham, UNITED KINGDOM.

  • Municipal Engineering Services

    Gilmore & Associates has provided a wide range of high-quality engineering and planning  services to municipalities since 1973. Our comprehensive approach builds on almost 40 years of experience to meet the vision and goals of each borough, township, city, and county government we serve. As a result, many of our municipal accounts have ...

    By Gilmore & Associates Inc based in Philadelphia, PENNSYLVANIA (USA).

  • Field Exploration

    Menard Pressuremeter (MPT)Cone Penetrometer (CPT)Vane Shear Testing (VST)Standard Penetration Testing (SPT)Slope InclinometerDiamond Core DrillingPermeability TestingEnvironmental Soil ProbeEarth Resistivity TestingUS COE Field CBR Testing

    By Materials Testing Consultants (MTC) based in MICHIGAN (USA). from Geotechnical Engineering Services Service line

  • Geotechnical Engineering Services

    Subsurface exploration. Geotechnical instrumentation. Slope inclinometer installation. Lab testing (Conducted in AMRL approved lab) . Field testing. Report writing. Retaining walls design.

    By Eastern Engineers Group based in Laurel, MARYLAND (USA).

  • Horizontal-Directional Sampling for Environmental and Geotechnical Studies

    Horizontal Directional Drilling (HDD) provides a viable means to collect environmental samples from locations that are inaccessible to vertical drill rigs, direct-push methods, or sonic methods, due to surface infrastructure or natural barriers. Using directional drilling techniques, DTD can collect samples from locations that are hundreds of ...

    By Directed Technologies Drilling Incorporated (DTD) based in Bremerton, WASHINGTON (USA).

  • Oil and Gas Facility Design, Permitting, and Construction Support Services

    EarthRes has experienced first- hand the rapidly advancing development of shale gas production, and is highly familiar with regulations and compliances. Our firm will provide you with the guidance to plan a successful project of shale gas development, from beginning to end. Our fully rounded capabilities in water resource engineering, impoundment ...

    By EarthRes Group Inc. based in Pipersville, PENNSYLVANIA (USA).

  • Geofrost - Geotechnical Engineering Services

    Geological understanding and geotechnical engineering is the backbone for all of our solutions. The activities range from ground investigations to specification of requirements for geotechnical solutions.

    By Geofrost AS based in Oslo, NORWAY.

  • Real Estate Development Support Services

    Covering a broad array of environmental services, from participation in Brownfields projects to site permitting, as well as geotechnical investigations, contamination assessment, remediation design and management. We also have excellent experience in Maine's Voluntary Remedial Action Program (VRAP).

    By Summit Environmental Consultants, Inc. based in Lewiston, ME, MAINE (USA).

  • Transportation Services

    TesTech is DBE (UCP) certified with the Indiana and Michigan Departments of Transportation as a geotechnical engineering firm testing laboratory and environmental consultant. All surveying services are performed in accordance with FAA, ODOT, INDOT and MDOT roadway standards.

    By TesTech, Inc. based in Dayton, OHIO (USA).

  • Geotechnical Site Investigations Services

    Wardle Drilling & Geotechnical Ltd can undertake ground investigations on previously developed, undeveloped or challenging sites using standard exploratory methods including: Excavation of trial pits. Shell and auger boreholes. Rotary cored boreholes (conventional or wireline methods). Rotary drilled open hole boreholes. Rotary augered ...

    By Wardle Drilling & Geotechnical Ltd. based in Hampshire, UNITED KINGDOM.

  • LogitEasy - Free Boring Log Software and Boring Log Drafting Services

    https://logiteasy.com LogitEasy provides boring log software online and boring log drafting services to geotechnical engineering and environmental consulting companies.LogitEasy's web-based boring log software (called the LogitEasy eForm) is usable both in the field for logging soil borings and in the office for transferring field notes. Once the ...

    By LOGitEASY based in ILLINOIS (USA).

  • Structural Engineering Service

    Review and interpretation of Geophysical & Geotechnical data. Structural design : jacket / monopile / J-tubes / boat-landings. Substations design. Naval Architecture (Mooring and floater design)

    By Kraken Subsea Solutions based in PARIS, FRANCE.

  • Cone Penetration Tests Services (CPT)

    For accurate and sound site plans, SGS cone penetration testing services can determine your site strength and resilience. Talk to our qualified team today.

    By SGS based in Geneva 1, SWITZERLAND. from Environment Service Service line

  • Laboratory Services

    Ground Engineering can provide a comprehensive UKAS accredited Geotechnical and construction materials testing facility as part of its integrated ground investigation service. Laboratory facilities are located at the Ground Engineering premises to permit close liaison and enable efficient management of the testing process.

    By Ground Engineering based in Peterborough, UNITED KINGDOM.

  • BCRCo - BCRCo Group

    GeotechnicalSoil StabilizationWater and West Water TestsConstruction Material TestsGeographical SurveyingConsultant Services Mining investigationWater Well

    By Base Consultant And Research Corporation based in Kabul, AFGHANISTAN.

  • Engineering Services

    Chow Engineering (CE) offers an array of disciplined, technical Engineering Services for our partners and valued customers. These services include Civil Engineering, Structural Engineering, Geotechnical Engineering, Mechanical and Electrical Engineering, and forms the core services for Chow Engineering’s DESIGN-BUILD complete solutions. Our ...

    By Chow Engineering, Inc. based in Oakland, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you