Only show results available in Connecticut? Ok

Ground Movement equipment for Soil and Groundwater

  • Premium

    TANA - Model E260 - Landfill Compactor

    Weight: 26000 kg. Total length: 8 260 mm. Total width: 3 660 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 890 mm. Length without dozer blade: 6 640 mm. Width without dozer blade: 3 250 mm. Inside turning radius: 3 880 mm. Driving speed ranges: 0-4.5 km/h 0-6 km/h. Maximum crushing force: 127 kN.

    By Tana Oy based in Jyvaskyla, FINLAND. from Landfill Compactor - E Series - Tier 3 Product line

  • Premium

    TANA - Model E450 Eco - Landfill Compactor (Tier 4 Final)

    Weight: 45 000 kg Total length: .9 230 mm Total width: 5 000 mm Total height: 4 320 mm Wheel base: 4 050 mm Ground clearance.: 890 mm Length without dozer blade: 7 430 mm Width without dozer blade.: 4 390 mm Inside turning radius: 3 310 mm Driving speed ranges: 0-5 km/h 0-7 km/h Maximum crushing force: 221 kN.

    By Tana Oy based in Jyvaskyla, FINLAND. from Landfill Compactor - E Series - ECO Product line

  • Premium

    Tana - Model E380eco - Landfill Compactor (Tier 4 Final)

    Unique design. Twin drums Fewer passes, smooth and dense surface. Rigid frame Best crushing force. Crushing teeth Optimized size, shape and number for optimized spreading and crushing of waste. Tana Smart Site Basic to minimize downtime and improve cost analysis.

    By Tana Oy based in Jyvaskyla, FINLAND. from Landfill Compactor - E Series - ECO Product line

  • Premium

    TANA - Model E520eco - Landfill Compactor (Tier 4 Final)

    Weight: 52 000 kg. Total length: 9 230mm. Total width: 5 000 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 890 mm. Length without dozer blade: 7 430 mm. Width without dozer blade: 4 390 mm. Inside turning radius: 3 310 mm. Driving speed ranges: 0-5 km/h 0-7 km/h. Maximum crushing force: 255 kN.

    By Tana Oy based in Jyvaskyla, FINLAND. from Landfill Compactor - E Series - ECO Product line

  • Premium

    TANA - Model E320 - Landfill Compactor

    Weight: 32 000 kg. Total length: 8 260 mm. Total width: 3 660 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 890 mm. Length without dozer blade: 6 640 mm. Width without dozer blade: 3 250 mm. Inside turning radius: 3 880 mm. Driving speed ranges: 0-5 km/h 0-7 km/h. Maximum crushing force: 157 kN.

    By Tana Oy based in Jyvaskyla, FINLAND. from Landfill Compactor - E Series - Tier 3 Product line

  • Premium

    TANA - Model E450 - Landfill Compactor

    Weight: 45 000 kg. Total length: 9 230 mm. Total width: 5 000 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 890 mm. Length without dozer blade: 7430 mm. Width without dozer blade: 4 390 mm. Inside turning radius: 3 310 mm. Driving speed ranges: 0-5 km/h 0-7 km/h. Maximum crushing force: 221 kN.

    By Tana Oy based in Jyvaskyla, FINLAND. from Landfill Compactor - E Series - Tier 3 Product line

  • Premium

    TANA - Model E520 - Landfill Compactors

    Weight: 52 000 kg. Total length: 9 230 mm. Total width: 5 000 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 890 mm. Length without dozer blade: 7430 mm. Width without dozer blade: 4 390 mm. Inside turning radius: 3 310 mm. Driving speed ranges: 0-5 km/h 0-7 km/h. Maximum crushing force: 255 kN.

    By Tana Oy based in Jyvaskyla, FINLAND. from Landfill Compactor - E Series - Tier 3 Product line

  • Premium

    TANA - Model E380 - Landfill Compactor

    Weight: 38 000 kg. Total lengthc 9 050 mm. Total width: 4 500 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 890 mm. Length without dozer blade: 7430 mm. Width without dozer blade: 4 390 mm. Inside turning radius: 3 310 mm. Driving speed ranges: 0-5 km/h 0-7 km/h. Maximum crushing force: 186 kN.

    By Tana Oy based in Jyvaskyla, FINLAND. from Landfill Compactor - E Series - Tier 3 Product line

  • Polyethylene Water Tanks

    These polyethylene water tanks are manufactured in non-traditional shapes and sizes to more efficiently adapt to your specific water storage needs. The different sizes and construction of the tanks offer an individual advantage. Whether you are looking for self-supporting tanks to store around your site, tanks to transport water to different ...

    By GEI Works, Inc. based in Sebastian, FLORIDA (USA). from Poly Plastic Tanks Product line

  • Model Z-LOK STM - Boot Style Connector

    The Z-LOK STM Connector was designed to address the need for a boot style connector for large diameter pipe, making it ideally suited for stormwater application. Available for 6'-102' pipes. A watertight connection is produced by tightening the Redi-LOK Clamp to the specified torque value. The Z-LOK STM Connector is manufactured to meet or exceed ...

    By A-Lok Products, Inc. based in Tullytown, PENNSYLVANIA (USA). from Boot Connectors Product line

  • Sensors & Software - Ground Penetrating Rescue Radar (GPR)

    Ground Penetrating Radar (GPR) Rescue Radar from Sensors & Software. When disaster strikes, the first hours are critical to save the lives of buried victims. Immediately following a disaster, emergency personnel rush to the scene to rescue survivors from the rubble. Search and Rescue teams must quickly assess the situation and decide where to ...

    By Sensors & Software Inc. based in Mississauga, ONTARIO (CANADA). from Other Products Product line

  • Active and Passive Skimmer

    For the recovery of the floating product on the ground water are used systems able to follow the movements of the flap itself and recover only the lightweight product. The system is equipped with a float floating with calibrated specific weight. In function of the supernatant layer and of the characteristics of this, may be used skimmer ...

    By Dimaco s.a.s based in Gela (CL), ITALY.

  • GPS - Model PE80 - Pipe For Pressurised Gas Supply

    Our PE80 pipe is manufactured from MDPE rather than HDPE PE80.  MDPE has a higher long term stress crack resistance than traditional HDPE PE80.

    By GPS PE Pipe Systems based in Huntingdon, UNITED KINGDOM.

  • Cofra - Model CDC - Compaction System

    Rapid impact compaction(RIC) has changed the method of the compaction of reclamations. Nowadays reclamation projects are executed much faster in comparison with 10 years ago, due to the use of rapid impact compaction. This is mainly due to the enlargement of the dredging fleet. This reduces the time available for the deep compaction of a terrain ...

    By Cofra B.V. based in Amsterdam, NETHERLANDS. from Rapid Impact Compaction Product line

  • 7` x 5` Plastic Shed Base - 35 Panels

    7ftx 5ft Plastic Shed Base Panels – the 35 Interlocking Panels are the Eco friendly alternative to a traditional concrete base and creates the ideal for all garden buildings. Plastic shed base panels are lightweight, quick and easy to install made from 100% recycled plastic which are strong, durable, weather and UV resistant. the ...

    By Shed Base Company - a trading division of GCL Products Ltd. based in Chesterfield, UNITED KINGDOM. from Shed Base Product line

  • Saddle Connections - Tap-N-Tee

    The Tap-N-Tee flexible lateral connection accommodates ground movement and has a shear band to prevent off set joints. Tap-N-Tee eliminates the need for glue, epoxy or grout when making a lateral connection and 'One Size Fits All.' No need for excess inventory and specials tools. The 'positive stop' located inside the Tap-N-Tee prohibits ...

    By Joints Couplings based in El Monte, CALIFORNIA (USA).

  • Renn - Hammer Grinder Mill with Conveyor Discharge

    The RENN Hammer Mill (Grinder) with Conveyor Discharge is designed for producers who need to process large volumes of high-moisture grain into a fine grind with speed and ease. The smooth and gentle movement of the conveyor allows the finely ground product to be transferred for bunker storage without the assistance of air – protecting ...

    By Renn Mill Center Inc. based in Lacombe, ALBERTA (CANADA). from Grain Processing Product line

  • IZIFIT - Ductile Iron Pipe

    IZIFIT is a comprehensive ductile iron fittings solution for all types of plastic pipelines used in the distribution of drinking water and is the cornerstone of all PVC networks. For good mechanical resistance, ductile iron fittings have to be used with all plastic tubes made of PE (Polyethylene), PVC­U (Unplasticized Polyvinyl Chloride), and ...

    By Saint-Gobain PAM based in PONT-A-MOUSSON, FRANCE. from Drinking Water - Raw Water Product line

  • Low Level Silos

    We manufacture a range of Vertical and Low Level horizontal silos suitable for storing cement, pfa or lime in standard capacities of 40, 50, 60, 80 and 100 tonne. Other capacities are available to suit customer's specification.

    By Pressvess based in Kingswinford, West, UNITED KINGDOM.

  • Jeostok - Portable Measurement Systems

    Portable measurement systems include a probe, cable, and readout. Portable systems are economical because they can be carried from site to site. They are accurate because the entire length of the casing is measured twice in each survey.

    By Jeostok based in Çankaya, TURKEY. from Inclino Meters Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you