Only show results available in Virginia? Ok

Groundwater Drilling Applications

  • Solutions for the equipment decontamination

    BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment.  Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Water Data Management Solution for Groundwater Monitoring

    Deployed across all relevant sectors including landfill security, well field monitoring programs, pumping tests, and drinking water supply, KISTERS solutions can be used to measure groundwater data.

    By KISTERS AG based in Aachen, GERMANY.

  • Residential and Commercial, Underground Thermal Energy Storage

    PROJECT OVERVIEW: Large residential and commercial project in London, overlooking the Thames. A 2.9MW cooling and heating aquifer thermal energy storage system for five mixed-use buildings including over 200 luxury apartments.

    By Boode Waterwell Systems based in Zevenhuizen, NETHERLANDS.

  • Premium

    Sampling and drilling equipments for the mining industry

    AMS, Inc. has been a leading provider of high quality sampling equipment since 1942. AMS sampling equipment is primarily used for environmental, geotechnical, and remediation uses as well as soil, soil gas, and groundwater monitoring. In addition, AMS makes PowerProbe direct push/hollowstem auger drill rigs for environmental and geotechnical drilling activities. AMS also manufactures and offers direct push tooling, drilling equipment, accessories, and expendables for soil sampling, groundwater sampling and monitoring well installations.

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • Premium

    Sampling and drilling equipments for the agriculture industry

    Farmers and researchers in the agricultural industry have used AMS sampling equipment for over 50 years. The AMS Step Probe, Soil Recovery Probes, and a variety of one and two-piece augers are used in the agricultural sampling market to obtaining disturbed samples at or near the surface and for boring to depths where more precise samples can be obtained. AMS now offers a variety of nematode sampling equipment, ATV-mounted PowerProbe rigs, and one and two-piece open-faced augers.

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • Premium

    Site investigation for horizontal drilling

    Site investigation for horizontal drilling.

    By Advanced Geosciences, Inc. based in Austin, TEXAS (USA).

  • Premium

    Eliminating the Environmental foot print for Offshore and On shore oil rigs

    OSE II ELIMINATING THE ENVIRONMENTAL FOOT PRINT WHILE REDUCING COSTS ASSOCIATED WITH DRILLING MUD, DRILLING MUD CLEAN UP, RIG WASHING, RIG OPERATIONS AND EMERGENCY OIL SPILL RESPONSE FROM OIL RIGS

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Applications and Air Pollutants Removed in the Petroleum/Petrochemical Industry

    Scrubbing of Hydrogen sulfide, mercaptans and other organosulfur compounds from sour gas and other sources. Proprietary regenerative scrubbing chemistries for hydrogen sulfide removal with sulfur production. By-product production systems for producing sodium hydrosulfide (Nash) from hydrogen sulfide. Sulfur dioxide scrubbing. Recover catalyst dust from FCC units. HCL storage tank vent scrubbing. Removal of HCL and particulate from thermal oxidizers burning chlorinated plastics. Marine drilling platforms sulfur dioxide thermal oxidizer emissions.  Asphalt plant scrubbers and hydrogen sulfide emissions from holding tanks. Pilot plant scrubber systems for hydrogen sulfide. Removal of halogenated and sulfur bearing gaseous compounds from high temperature thermal oxidizers and drilling platforms waste. Well drilling hydrochloric acid storage tanks.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Offshore Oil Drilling and Production Project

    PROJECT OVERVIEW: The re-lining of 12 seawater supply wells to a depth of 45 metres with Boode Select PVC screen and casing. The supply wells support an offshore oil drilling and production platform and were re-lined following the failure of existing stainless steel screen and casing due to sand ingress and corrosion.

    By Boode Waterwell Systems based in Zevenhuizen, NETHERLANDS.

  • Cavity pump for mining industry

    The demanding mining industry requires a lot from its progressing cavity pumps. A large range of media needs to be pumped with a variety of viscosity levels that can be highly abrasive. Media pumped include mineral slurries, thickened sludges, waste water, and drilling muds.  Moyno progressing cavity pumps meet the demands of the mining industry.

    By Moyno, Inc. based in Springfield, OHIO (USA).

  • Oil & Gas Exploration and Pipeline Imaging

    Exploration and Pipeline Imaging

    GeoVantage specializes in custom imaging of basins for oil & gas exploration for up to date assessment of drilling activity and logistics. Large tracks of land, at 6 inch or 1 foot resolution, ensure that exploration companies know exactly what is happening in key regions of their lease holds and even those surrounding.

    For pipelines, GeoVantage offers quick, efficient capture of intricate pipeline layouts across all of North America and other countries. To ensure timely service, both large and small captures can be collected by a large group of sensors deployed in multiple places.

    Oil and Gas Pipeline Imaging and Class Analysis

    GeoVantage works closely with firms that specialize in Oil and Gas Pipeline imaging and class analysis. GIS Data Specialists (GDS) is one of those firms. GDS is able to take the GeoVantage high resolution imagery and output the information needed to comply with regulatory or company requirements for reporting.



    By GeoVantage based in Peabody, MASSACHUSETTS (USA).

  • Pipe & tube cleaning

    Problem: As liquid product hardens, it builds up in a tube or pipe and restricts flow and efficiency. Removing it with drills or brushes can be hard, slow work, resulting in too much downtime.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Ground Penetrating Radars (GPR) for Roads and Bridges Construction

    The roads and bridges construction and repair demand of careful investigation of road surfacing state, quality of used concrete and geological assessment of ground structure under roads to find any heterogeneity. GPRs can be applied here for: tunnels, road surface thickness measure, runways state assessment. The important advantage of GPRs using – quick road surface assessment.

    By Transient Technologies LLC based in Kyiv, UKRAINE.

  • Pulsair`s industrial drilling mud agitators for oil & gas industry

    Industrial drilling mud agitators and mixing equipment for oil & gas exploration. Pulsair Systems supplies oil & gas operators with industrial drilling mud mixer agitators for mud tank mixing. The Pulsair mixing process quickly allows drillers and operators to ensure homogenous mud consistency for their drilling mud needs.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Premium

    Deep well level measurement for ground water industry

    Application: Deep drilling 150 m. Bore diameter 30 mm.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Cavity pump for oil and gas industry

    Moyno Pumps are currently being used in all segments of the Oil and Gas market from the North Slope region in Alaska to the Gulf of Mexico and beyond. The Oil and Gas industry encompasses all of the steps involved in finding, producing, transporting and marketing oil and natural gas.

    By Moyno, Inc. based in Springfield, OHIO (USA).

  • Horizontal Remediation Well Systems

    Horizontal wells are a proven and effective remedial technology for site cleanup. For environmental applications, horizontal wells offer several advantages in comparison to traditional vertical wells. The first horizontal wells were installed using a mid-sized directional drill rig in 1993 by Directional Technologies, Inc. The three (3) horizontal Soil Vapor Extraction wells installed at John F. Kennedy International Airport was the beginning of a new industry. Directional Technologies, Inc. founders transferred their experience from the oil fields to the environmental industry. This has resulted in the installation of over 1,000 horizontal wells for site remediation worldwide. Horizontal Remediation Wells are a time-tested and proven technology that can provide solutions for problems previously considered unfeasible. Interested in learning more about this remedial technology, visit us at www.directionaltech.com for case studies and more.

    By Directional Technologies, Inc. based in Miramar Beach, FLORIDA (USA).

  • Drill pipe cleaning

    Problem: When scale and hardened mud build up in oil well drill pipe, plugged drill heads are the usual result. This reduces efficiency and increases downtime. Traditional rattle-and-brush systems can leave some build-up behind and require a rinse operation to flush debris and drilling fluids.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Decanter centrifuge for drilling mud solids control

    Decanter centrifuge is used as the 4th phase solids control equipment after shaker, desander and desilter. The centrifuge suck the mud from the compartment receiving the discharge from the desilters and mud cleaners, and the returned stream is directed to the next compartment downstream. The use of decanter centrifuge with the drilling mud is (1) removal fine solids from unweighted fluids (2) selection separation of colloidal and ultra-fine solids from weighted fluids to improve their flow properties.

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you