Only show results in Texas? Ok

Groundwater Modeling equipment for Soil and Groundwater

  • Premium

    Singer Valve - Model 106/206-RF - Flow Limiting Control Valve

    The 106-RF and 206-RF rate of flow control valves are based on the 106-PG or 206-PG main valves. The valve is ideal for limiting the flow to a pre-determined maximum (via maintaining a continuous pressure differential across an orifice). When the pressure differential is less than the set-point, the valve opens, allowing flow to meet predetermined ...

    By Singer Valve Inc. based in Surrey, BRITISH COLUMBIA (CANADA). from Flow Limiting Control Valve Product line

  • Premium

    GPE - Model 31530 - Photoelectric Line Guide Sensor

    The Model 31530 Line Guide Sensor is designed primarily for photoelectrically sensing the lateral position of a line or abrupt color contrast on web material of an opaque or transparent quality. This information is transmitted electrically to a hydraulic controller for final control action. The Model 31530 is used exclusively with the Dynaguide* ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Photoelectric Line Guide Sensor Product line

  • Premium

    GPE - Model 31520 - Miniature Edge Guide Sensor

    The Model 31520 Edge Guide Sensor is designed primarily for photoelectrically sensing the lateral edge position of materials in motion, in particular web material of an opaque quality. This information is transmitted electrically to a electro-hydraulic controller for final control action. Model 31520 is used exclusively with the Dynaguide* ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Miniature Edge Guide Sensor Product line

  • Premium

    CHEMTEX - Plug Dike Tank Repair Compound, 1 Lb Jar

    Seals off fuels, solvents, and many other chemicals. Seals immediately and sticks to dirty, crumpled surfaces, even with the fluid flowing out.

    By Chemtex, Inc. based in Cumberland, RHODE ISLAND (USA). from Plug Dike Tank Repair Compound, 1 Lb Jar Product line

  • Premium

    AMS - Hydraulic Port-A-Reels Pump

    The pump, motor cable, and hose are built onto a rugged powder-coated frame. Large 16' pneumatic tires with extendable swivel castors are on the front. The boom is extendable to accommodate different well casing heights. These hydraulic models includes a 1 hp 110 volt electric driven hydraulic pump motor with a pendant control. The unit is also ...

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hydraulic Port-A-Reels Pump Product line

  • Survey

    Designed to give surveyors flexibility with instrumentation and coding to provide the ultimate survey tool. The survey module has been developed in consultation with surveying industry leaders. A Powerful & New Surveying, Terrain Modelling & Civil Engineering Application. This product is “Best in Class” tool for the ...

    By 12D Solutions Pty Ltd. based in Narrabeen, AUSTRALIA.

  • Mass Excavator Fronts for Excavators

    Designed and manufactured for mounting on all make and model hydraulic excavators. Engineered to use customers pins, cylinders buckets, linkage and attachments. Mass excavator fronts and sticks come with bushings and seals only. Optional complete packagesJewell provides stick cylinder and bucket cylinder. Additional counterweight packages custom ...

    By Paladin Attachments based in Dexter, MICHIGAN (USA).

  • Cascade Cart - Model Low-Profile RL-SL - Cylinder Style Lifters

    Cascade Engineering offers four types of Cylinder Style Lifters. All models are equipped with industrial-quality hydraulic cylinders and each unit comes complete with a bolt-on mounting plate and a weld-on installation plate for quick and easy setup. Low-Profile RL-SL - for commercial rear load with OH winch applications and some side-load ...

    By Cascade Cart Solutions based in Grand Rapids, MICHIGAN (USA). from Cylinder Style Lifters Product line

  • Deluxe - Model 8 - All-In-One

    Reversible High-Flow Filter (Model SLC). Deluxe 8-way Massaging Spray. 'Soft Touch' Adjustment Pads. Anti-Scaling Spray Nozzle. High Strength Housing. Triple Plated Finish. Cartridge Life Rating: 6 Months.

    By Sprite Industries, Inc based in Corona, CALIFORNIA (USA). from All-In-One Product line

  • Fluigent - Droplet Kit

    Designed to be used with the Droplet Starter Pack. with any Flow EZ™ pressure channels and FLOW UNITS models.. PDMS Droplet Chips with tubing and fittings.

    By Fluigent based in VILLEJUIF, FRANCE.

  • Stan Jacks - Model J6000H - Rolling Jacks

    Aboveground Lifts Ideally suited to any of the following lifts: Rotary, Bend-Pak, Challenger, Wheeltronics, Snap On, Hoffman, John Bean Company, Western, Benwill, Globe, Stenhoj and Hunter. (All 12,000 or 14,000 lb. cap models)

    By Stan Design Inc. based in Mississauga, ONTARIO (CANADA). from Rolling Jacks Product line

  • Model 70,000 (35 Ton) - Hydraulic Detachable (RGN) Double Drop Trailer

    Model Number: 492YBBIZZGCA. Beam Rating: 70,000 lbs in 16 feet. Overall Length: 48’ 6”. Top Deck Length: 10’ 6”. Main Deck Length: 29’ 0”. Rear Deck Length: 9’ 0”. Swing Clearance: 82 Inches. Lower Deck Nose: Tapered nose on lower deck with gripper lugs. Width: 102 inches.

    By Doonan Specialized Trailer, LLC based in Great Bend, KANSAS (USA). from Hydraulic Detachable (RGN) Double Drop Trailer Product line

  • McIlroy - Culti-Pak

    Custom-built to your needs. Hydraulic lift available for any model. Steel rings for extreme durability. 1/2' wall steel tube for long wear. 12' through 18' rings available. 2' axle shaft with 1/2' support plates.

    By McIlroy Equipment based in Huron, CALIFORNIA (USA).

  • Single Section

    Tebben single section landrollers are available from 7 feet to 21 feet. These landrollers are equipped with a 42' diameter drum and 2 hydraulic lift wheels. Models TR7, TR15, and TR17 are fixed width. Model TR21P hydraulically folds for a 7' 6' transport width. Custom widths are available. Please contact us for a quote.

    By Tebben Enterprises Inc. based in Clara City, MINNESOTA (USA). from Single Section Product line

  • Model TT400 - Trailer

    Deck: 1/8” or 3/16” Diamond Plate. Deck Length: (+/-) 2 ft. Increments up to 18’. Deck Width: Up to 82”. Axles: 6,000 lb. (GVW: 13,000 lb., Max. Capacity: 11,000 lb.), 7,000 lb. (GVW: 13,000 lb., Max. Capacity: 11,000 lb.). Tires: ST235-80-R16. Brakes: Surge/Hydraulic (NOTE: Surge brakes may be deemed illegal in certain ...

    By Fleming Trailers, Inc. based in GLENDALE, ARIZONA (USA).

  • Model T500 - Trailer

    Deck: 1/8” or 3/16” Diamond Plate. Deck Length: (+/-) 2 ft. Increments Up To 20’ (Note: 20’ Trailers only available in steel deck). Axles: 7,000 lb. and 8,000 lb. Brakes: Surge/Hydraulic (NOTE: Surge brakes may be deemed illegal in certain applications), Electric/Hydraulic, Disk Brakes on -5 Model and Above. Hitch: 2 ...

    By Fleming Trailers, Inc. based in GLENDALE, ARIZONA (USA).

  • JPM - Tri Axle Low Loader

    Tri-axle Low Loader available as 27t gross or 33t gross. All tri axle low loaders come as standard with : Hydraulic brakes,215 / 75 R 17.5 J rated wheels,sprung drawbar,full road lights. Options Include :

    By JPM Trailers based in Donaghmore, NORTHERN IRELAND.

  • Model 1000HD, 1000HDRS, 1200, 1200, 1400, 1400, 1600 RS - Graders

    All hydraulic cylinders on Hygrade Graders have Nitro Steel Shafts.  Nitro Steel Shafts will Withstand exposure to the elements much longer than chrome without rusting. 10HD, 12, 14, and 16 foot graders come standard with a blade tilt indicator.

    By Johnson Mfg., Inc. based in Kulm, NORTH DAKOTA (USA). from Graders Product line

  • Model CT - CT Series Thumbs

     Amulet offers the Best Rigid Universal Thumb – B.R.U.T. for an excellent alternative for backhoe loader and small excavator owners looking for a thumb that is heavy duty in design and easy to install and use. Built to excel in demolition, rip rap, land clearing, scrap, etc. the CT Series thumbs are designed for those who are unable to, ...

    By Amulet Manufacturing Company based in Rathdrum, IDAHO (USA). from CT Series Thumbs Product line

  • Caframo - Model U044SW - Anchor & Sweep

    Achieve enhanced process results with the addition of silicone sweep blades to our popular U044 anchor impeller. The impeller with sweep is effective for low speed, high viscosity mixing up to 38,000 mPas. The tangential flow 102 x 102 mm (4 x 4 in) anchor blade is welded to an ...

    By Caframo Limited based in Georgian Bluffs, ONTARIO (CANADA). from Anchor & Sweep Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you