Only show results available in Virginia? Ok

Piezometers equipment for Soil and Groundwater

  • Model 615 - Drive-Point Piezometer

    The Model 615 Drive-Point Piezometers use a high quality stainless steel piezometer tip, 3/4' NPT pipe for drive extensions and LDPE or Teflon sample tubing, if desired. Combine these with an inexpensive Slide Hammer and you have a complete system.615N Simple Well Point • Water Level Monitoring and Groundwater Sampling. 615 Barbed Fitting; 1/2' ID ...

    By LaGa Systems Pvt Ltd based in Hyderabad, INDIA.

  • Geokon - Model 3400 - Semiconductor Piezometers

    The Model 3400 Semiconductor Piezometers and Pressure Transducers are intended for dynamic measurements of fluid and/or pore water pressures in standpipes, boreholes, embankments, pipelines, pressure vessels, reservoirs, etc. They are also used for static pressure movement where the readout system is incompatible with vibrating wire type ...

    By Geokon Inc based in Lebanon, NEW HAMPSHIRE (USA). from Semiconductor Piezometers Product line

  • Piezometric Casings Casagrande Piezometer

    It is essential to know the static liquid pressure of the groundwater and pore water in waterlogged land when checking the stability of all works that could be affected by the aquifer underneath. This information can be obtained by using a PVC casing formed by several blind and micro-slotted tubes assembled together in a borehole so as to form an ...

    By Earth System s.r.l. based in Pilastrello Parma, ITALY. from Piezometric Casings Casagrande Piezometer Product line

  • Durvinil - PVC Piezometric Pipes

    Sireg Geotech produces PVC DURVINIL piezometric pipes with diameters from 2 to 8 inches, both blind and microslotted into different lengths. Sireg Geotech piezometric pipes may be equipped with immersion pumps for the construction of wells to be used for the verification of water levels through phreatimeters, or they can be used to sample the ...

    By Sireg Geotech S.r.l based in Arcore (MB), ITALY. from PVC Piezometric Pipes Product line

  • Fratelli - Microslotted Piezometric Pipes

    Microslotted piezometric pipes in AISI 304 and 316 stainless steel for the geotechnics sector, in the case of piezometers, sub-horizontal drains and environmental decontamination when there is a need for high quality materials of particular corrosion and mechanical resistance.

    By Fratelli Molè S.r.l. based in Chiaramonte Gulfi, ITALY.

  • Model VW - Multiple Piezometers

    Allows multiple VW piezometers to be simply and reliably installed in a single borehole. It can be connected to a tough urethane jacketed Kevlar® reinforced single cable which prevents vertical void channels. Used primarily where multi-zone monitoring is needed at single locations. No conductors are shared ensuring the independent ...

    By Geosense Ltd based in Suffolk, UNITED KINGDOM. from Multiple Piezometers Product line

  • Model EPP-30V - Vibrating Wire Piezometer

    EPP-30V is a vibrating wire piezometer used to measure pore water pressure in soil, earth/rockfills, foundations and concrete structures. EPP-30V is of stainless steel construction and hermetically sealed under a vacuum of 0.001 Torr. Each sensor has built-in thermistor for temperature measurement and surge arrestor for lightning protection. A ...

    By Encardio-Moniterra Group based in NICOSIA, CYPRUS. from Vibrating Wire Piezometer Product line

  • Model D-13 - Plastic Valve

    The Low Flow System is designed to be used in small diameter piezometers (usually 1.5' ID to 0.75' ID). It can provide flow rates of up to 1/2 gallon per minute and can lift water from up to 100 feet. This system consists of a low flow valve, either the acetal plastic D-13 foot valve or the stainless steel SS-13 foot valve and HDPE, LDPE or FEP ...

    By Waterra USA Inc. based in Peshatin, WASHINGTON (USA). from Plastic Valve Product line

  • Model PW Series - Vibrating Wire Multi-Level Piezometer

    The multi-level vibrating wire piezometer is perfect for measuring pore pressures at various depths beneath a single surface location. It allows for quick and reliable installations because multiple PW-series piezometers are connected to a single communication cable. The multi-level piezometer provides significant advantages in terms of time, ...

    By Roctest - part of Nova Metrix LLC based in Saint-Lambert, QUEBEC (CANADA). from Vibrating Wire Multi-Level Piezometer Product line

  • Gouda-Geo - Piezometer Standpipes

    A piezometer standpipe is a tube with a perforated part, that is placed in the ground in order to determine the groundwater level (i.e. the freatic water table) or to monitor the quality and quantity of the groundwater. The perforated part of the piezometer standpipe is called the filter tube and is in general 1 or 2 meters long. The 'blind' or ...

    By Gouda Geo-Equipment BV based in Hillegom, NETHERLANDS. from Piezometer Standpipes Product line

  • Piezometer

    Geotech’s integrated electronic “direct push” piezometer is available with or without logging memory and can be used for permanent installation or reused in short-time pore pressure monitoring projects. Geotech electrical piezometers can be pushed statically directly into the ground without pre-drilling*. Monitoring of the ...

    By Ingenjörsfirman Geotech AB based in Askim, SWEDEN. from Piezometer Product line

  • Schumaprobe - 1`x24`, 40 Micron, Porous Polyethylene Sparge Point

    The Sparge Point sample (aka Schumasoil or Piezometer) pictured above shows the optional male flush threaded plug. This newly designed Sparge Point is unique in that it is the only Sparge Point on the market that has a male flush thread on one end and a female flush thread on the other end. These units may be screwed together for longer lengths or ...

  • VanEssen - Model PW Series - Vibrating Wire Piezometer

    The PW piezometer consists of a vibrating wire sensing element enclosed in a protective steel housing. The sensing element is essentially formed of a steel wire clamped to both ends of a hollow cylindrical body. An electromagnetic coil is used to excite the wire and to measure its vibration period. The period is sensitive to the pressure ...

  • Open Standpipe Piezometer

    Geotech open standpipe piezometers for measuring ground water level are made of sintered bronze filters and can be directly pushed into the soil without pre-drilling. The piezometer is used together with 1' tubes where standard water level meters are lowered into. It is also possible to use a hose for quicker detection of ground water changes. The ...

    By Ingenjörsfirman Geotech AB based in Askim, SWEDEN. from Open Standpipe Piezometer Product line

  • Model Vwp3000 Series - Piezometers

    Used for accurate measurement of pore water pressure in fully or partially saturated soil and rock. Pore pressure measurements in foundations, embankments retaining walls and dams. Fluid pressures in hydro-fracture & pump tests. Stability monitoring of tunnels, pipelines, mines and other underground engineering works. Draw down and recovery ...

    By NVM Limited Ireland based in Drogheda, IRELAND. from Piezometers Product line

  • Model MEMS - Piezometer Modem Logger

    The MEMS Piezometer Modem Logger combines a high capacity GSM/GPRS enabled datalogger with a small diameter MEMS Piezometer for use in fully or partially saturated soil and rock. Readings are stored on a local SD card and are transmitted in engineering units to any FTP site via the on-board Quad band GSM/GPRS modem. Logger settings are easily ...

    By Soil Instruments Ltd, a Division of Nova Metrix LLC. based in Uckfield, UNITED KINGDOM. from Piezometer Modem Logger Product line

  • Piezo - Model P235S - Resistive Piezometers

    Piezo-resistive piezometers, also called semiconductor piezometers or strain gauge piezometers, are very accurate pressure transducers suitable for high frequency readings and short term applications. Their robust 4-20mA output signals are easy to read and automate with OMNIAlog and suitable for long-distance transmissions. They can be connected ...

    By Sisgeo S.r.l. based in Masate (MI), ITALY. from Resistive Piezometers Product line

  • Geonor - Model M-610 Series - Embedment type Vibrating Wire Sensors

    The Geonor M-610 scries arc vibrating wire piezometers used for direct burial in embankments and earth/rockfill dams, for placement in boreholes, and for water level monitoring in open wells, tanks, and open bodies of water.

    By Geonor AS based in Østerås, NORWAY. from Embedment type Vibrating Wire Sensors Product line

  • Sisgeo - Model PK - Vibrating Wire Piezometers

    Vibrating wire piezometers are used to monitor pore-water pressure in soils. They are typically sealed in boreholes but can also be embedded in fills, or suspended in a well. Typical applications include evaluating slope stability, dewatering and drainage schemes, overpressure in silt and clay soils, permeability and hydraulic gradients in dams, ...

    By Sisgeo S.r.l. based in Masate (MI), ITALY. from Vibrating Wire Piezometers Product line

  • Vibrating Wire Piezometer

    The vibrating-wire piezometer is widely used for measuring pore water pressure in soil and rocks and for measuring groundwater level. The extremely sturdy, long-lasting sensor consists of a cylindrical stainless steel casing housing a vibrating-wire absolute pressure transducer, a fluid chamber and a sintered filter The pressure exercised by the ...

    By Earth System s.r.l. based in Pilastrello Parma, ITALY. from Vibrating Wire Piezometer Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you