Refine by
Applications
- Soil sampling and drilling solutions for agriculture industry
- Soil sampling and drilling solutions for pest control industry
- Soil sampling and drilling solutions for environmental industry
- Soil sampling and drilling solutions for golf and turf industry
- Stack Emission Sampling for Emission Dust Sampling Options
- Stack Emission Sampling for Heavy Metal Sampling System
- Stack Emission Sampling for Mercury Sampling System
- Stack Emission Sampling for Hydrochloride Acid Chimney Sampling
- Stack Emission Sampling for Dioxin Sampling
Ams Soil Groundwater Equipment & Supplies
492 equipment items found
Manufactured by:AMS Composite Cylinders Ltd based inSheffield, UNITED KINGDOM
AMS produce disposable aluminium cylinders for pure and mixed gases. We have a variety of options and fit outlet control valves as specified by our customers. Flexible and automated production lines ensure consistency of product and ...
Manufactured by:Air Management Systems Ltd (AMS) based inTonbridge, UNITED KINGDOM
The AMS Pressure Monitor has been born after looking at the regulations of Several countries in Europe and bringing them all together to design and build a versatile pressure monitor that performs well in all environments as well as complying with local ...
Manufactured by:FIEDLER AMS s.r.o. based inCeske Budejovice, CZECH REPUBLIC
HYDRO LOGGER H1 is one of small telemetric stations developed by FIEDLER AMS. Data logger is suitable for data collecting from places without mains power supply. Also, H1 are used in a cases when shroter intervals of measured data transfering into the server are enough (daily intervals). The battery is for 4.000 sent data reports or SMS messages. Data transfer and sending SMS are activated as ...
Manufactured by:Ame Drill Supply & Service Inc. based inMoncton, NEW BRUNSWICK (CANADA)
Drag bit designedfor use in soft formations such as sand, clay or some types of soft rock. Dragbits can be either solid or welded construction. However, they will not workwell in coarse gravel or hard rock formations. Uses include drilling waterwells, mining, geothermal, environmental and exploration drilling. Step drag bits areone piece construction of alloy steel cast with tungsten carbide ...
Manufactured by:Ame Drill Supply & Service Inc. based inMoncton, NEW BRUNSWICK (CANADA)
Drag bit designedfor use in soft formations such as sand, clay or some types of soft rock. Dragbits can be either solid or welded construction. However, they will not workwell in coarse gravel or hard rock formations. Uses include drilling waterwells, mining, geothermal, environmental and exploration drilling. Chevron drag bitsare one piece construction of alloy steel cast with tungsten carbide ...
Manufactured by:Ame Drill Supply & Service Inc. based inMoncton, NEW BRUNSWICK (CANADA)
Self drillinganchor (SDA) rock bolting system is a very up-to-date, reliable and highefficiency anchoring system which is widely used for tunneling bolting , groundsupporting, soil nailing, slope stabilization and ...
Manufactured by:Ame Drill Supply & Service Inc. based inMoncton, NEW BRUNSWICK (CANADA)
Taper drill bitsare widely applied in Hand Hold (short-hole) drilling system for dimensionalstone quarrying. All bits made with high quality of raw material throughspecial heat treatment, especially, all tungsten carbide of tapered button bitsuse hot press insert technology. ...
Manufactured by:Ame Drill Supply & Service Inc. based inMoncton, NEW BRUNSWICK (CANADA)
Extension roddrill rods are made by hollow drill steels. There are two shapes of extensionrods, round type and hexagonal type. This hollow hole are usually namedflushing hole, used for transmitting water or air during drilling. And thethreads can be used for connecting couplings, shanks, couplings or ...
Manufactured by:Ame Drill Supply & Service Inc. based inMoncton, NEW BRUNSWICK (CANADA)
The “DTH” is theabbreviation of “Down The Hole” and sometimes it is also called “RAB” in somemarkets, then the “RAB” is short for “Rotary Air Blasting”. Down the hole(DTH) hammers are widely used for mining, quarrying, construction, civilengineering and water well drilling. Combining premium raw materials withadvanced production ...
Manufactured by:Ame Drill Supply & Service Inc. based inMoncton, NEW BRUNSWICK (CANADA)
Reverse Circulation (RC) bit: The RC products have the unique ability tobring all cuttings up the center of the hammer and drill string to be safelycollected at the surface, which is essential in today’s environmentallyconscious society. The RC bits are the tool cutting rock. All of our RC DTHbits are made of superior quality alloy steel and tungsten carbide. Bit diameter: 85mm to ...
Manufactured by:Aqua Metrology Systems Ltd. (AMS) based inSunnyvale, CALIFORNIA (USA)
Utilities seeking an affordable and reliable hexavalent chromium (Cr6) remediation solution that complies with California's new 10-ppb MCL regulation will want to look at the SafeGuard™ H2O Cr6 removal system from AMS. Our NSF- approved Reduction/Coagulation/Filtration system is a designated Best Availability Technology (BAT) for Cr6 ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
2" X 12" Aluminum Tank Sludge Core Sampler Extension Section. Aluminum Tank Sludge Core Sampler Extension Sections have a female top thread and a male bottom thread which allow them to connect to the Aluminum Tank Sludge Core Sampler Base, as well as to each other. These extension sections allow the user to extend the sampler body to collect samples of longer ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
This dredge, often called a Van Veen grab or Van Veen dredge, is great for collecting sandy, silty, or muddy sediment samples in freshwater and coastal environments. Its weight makes it effective for shallow or soft-bottom conditions. With a screened top, water passes through during deployment, helping reduce sample disturbance. When the dredge contacts the bottom, the spring-loaded release ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The check flap on the top cap opens to allow excess air and water to escape through the four holes that are machined through the top cap. The venting action of the check flap and cap prevents pressure buildup while sampling. The check flap will also cover the machined holes while retrieving a sample to create a suction inside the sampler. The suction will help retain the collected ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
4' Aluminum Square Tank Sludge ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Easily collect sludge samples from the bottom of petroleum tanks with this unique and user-friendly sampling kit. Based on the popular design of the Multi-Stage Sludge & Sediment Sampling Kit, the components in this kit are similar, only they are made from lightweight aluminum. This proves to be crucial, as often tanks can be 50' plus in height; therefore, keeping your sampler and extension ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
This dredge, often called a Van Veen grab or Van Veen dredge, is great for collecting sandy or silty sediment samples in freshwater and coastal environments. Its weight makes it effective for shallow or soft-bottom conditions. When the dredge contacts the bottom, the trigger mechanism activates to close the jaws securely, retaining the ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Often called an Ekman grab, the Ekman dredge is great for collecting sandy, silty, or muddy sediment samples in freshwater and coastal environments. Its weight makes it effective for shallow or soft-bottom conditions. With a flapped top, water passes through during deployment, helping reduce sample disturbance. When the dredge contacts the bottom, the spring-loaded hooks activate to close the ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
This sturdy lid is designed to fit our 5-Gallon Ekman Dredge Storage Bucket, providing a secure closure for safe storage and sample ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
24" Static Cone Penetrometer Starter Rod Assembly. The Starter Rod Assembly can withstand an axial force of 250 lb./ft (340 N*m) ...