Only show results available in Virginia? Ok

Soil Stabilization Applications

  • Premium

    Geotextiles solutions for retaining structures areas

    In infrastructure projects in which space has to be saved or land acquisition minimized, TenCate Geosynthetic soil reinforcement technology has been used in the design and construction of steep slopes or walls. The use of this technology increases the stability of such structures.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Geotextiles solutions for reinforced embankments areas

    Need to increase the stability of your embankment? TenCate geosynthetics reinforce the shear stresses of the fill material leading to an increase of the foundation bearing capacity.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Airport environmental protection solutions for the runways & shoulders

    Airport Runway, Taxiway and Shoulder Stabilization. Airport pavements designed to support heavy commercial aircraft and vehicle loads require a stable base to maintain pavement performance. This can be challenging, especially in areas with soft soils and poor soils prone to settlement. The GEOWEB system stabilizes the pavement base layer with 50% less fill, and offers a more stable base that results in longer pavement life. The GEOWEB system is an effective base stabilization system as well as surface protection for unpaved, permeable shoulders and access way.

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • Soil Stabilization

    Problem: Poor load-bearing soils pose a significant problem for transportation and construction needs. Unpaved areas, such as access roads, paths, parking lots, driveways, etc can be highly vulnerable to near-surface shear failure and rutting, especially in moist conditions or areas with higher expected loads. Typically, engineers bridge over weak soils with rigid structures such as thick, reinforced concrete for roads and highways. However, such techniques are prohibitively expensive and inordinately difficult to install. The poorer the quality of the sub-base and the heavier the expected loads, the greater the amount and better the quality of support required.

  • Retaining Wall Construction

    Problem: Retaining Wall structures are growing ever more necessary as construction is forced to deal with rough terrain, steep slopes, and embankment reinforcement. Changes-in-grade present obstacles for roads and other development requiring flatter, more usable land. Most current types of retaining walls are made of cast-in-place, steel-reinforced concrete walls whose virtue is based entirely upon its internal strength and rigidity. However, these cantilever walls are expensive, vulnerable to cracking from high stress situations, and unattractive in the environment.

  • Posi-Shell Coatings

    Posi-Shell erosion control coatings are the perfect low-cost solution to protect and stabilize slopes. Our long-term coatings are spray-applied and allow engineers or operators to protect acres (hectares) of slope in a single day. The finished coating is durable and textured, reducing water energy across large areas. The final product eliminates erosion, siltation, and (as a result) expensive rework. The product can be designed to last for years and is easily tracked into slopes when intermediate protection is no longer necessary. Indeed, when integrated, Posi-Shell actually improves soil quality by conditioning it for future seeding. Posi-Shell’s simplicity and durability make it tremendously effective at controlling windblown dust, infiltration, or runoff associated with clean or contaminated stockpiles. Unlike cumbersome tarps or geo-membranes, Posi-Shell erosion control coatings are spray applied and do not require any ballast. Posi-Shell conforms and adheres to any topography and delivers 100% clean runoff. Stockpile loading or removal is accomplished by breaking into the coating where desired. Active areas may be left open or quickly resealed if required. Posi-Shell erosion control coatings are ideal for protecting expensive piles of salt, coal, or cement clinker; and are used extensively for containing hazardous or radioactive soils.

    By LSC Environmental Products, LLC based in Apalachin, NEW YORK (USA).

  • In Situ Injection Design and implementation services

    Since 1998 IET has designed and implemented over 1500 remedial projects, including reductive biotic/abiotic approaches, ISCO, synergistic approaches, metals stabilization, DNAPL stabilization, soil mixing and combined remedies.

    By Innovative Environmental Technologies, Inc. (IET) based in Pipersville, PENNSYLVANIA (USA).

  • High-calcium lime slurry for environmental reclamation industry

    Lime is the product of choice for soil stabilization and for road building applications as an anti-stripping agent for asphalt.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Environmental protection solutions for the site construction industry

    Safe and Economical Solutions for Site Work. Presto Geosystems has a 35+ year proven track record in civil site construction and restoration solving soil stability and access challenges. Through infill confinement, Presto’s GEOWEB 3D geocells reduce cross-sectional requirements by 50% or more for tracking pads, construction staging areas, access roads and work platforms – and they perform well over soft ground. The safest and most economical portable mats, GEOTERRA, offer fast, temporary site access.

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • Manufactured Gas Plant Site Remediation

    It is estimated that there are over 3,000 former Manufactured Gas Plant (MGP) sites across the United States. Another 4,000 dot the landscape of Canada, the UK, continental Europe and Japan. These sites were built long ago on rivers or harbors, often on the outskirts of towns and cities; locations that are now frequently in close proximity to infrastructure, buildings and residential areas. Many underlie or abut valuable commercial, residential, and municipal properties, posing environmental hazards to ground and surface waters. The urgency of remediation has increased due to a potent blend of community activism, regulatory pressure, high real estate values, and the need to reduce liability in light of the Sarbanes-Oxley Act and other measures.

    By TerraTherm - a Cascade Company based in Gardner, MASSACHUSETTS (USA).

  • Railway slope & ballast reinforcement solutions for the railroad sector

    The GEOWEB system is the ‘go to’ solution for challenging soil stability problems for both new construction and repair work. The GEOWEB 3D system is a versatile solution for ballast reinforcement, yard stabilization and erosion protection of embankments and stormwater channels, offering a more economical solution than geogrids or other 2D solutions - especially in soft soil environments and in heavy, repeated loading areas.

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • Environmental protection solutions for the porous pavements

    Our porous pavement solutions can be designed for use with a variety of permeable fill to suit any loading and stormwater requirements.  Three high-performance paving options offer porous solutions to hard surface pavements: GEOBLOCK grass pavers; GEOPAVE aggregate pavers; and GEOWEB pervious soil stabilization systems - all economical options for emergency, utility and site access roads, and permeable parking areas.  Each solution is suitable for low impact development (LID) and green infrastructure design and contribute to green building credits for managing stormwater and reducing site disturbance.

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you