In Situ Thermal Remediation (ISTR) Beneath and Around Existing Buildings and Infrastructure; In Situ Thermal Remediation (ISTR) technologies, including In Situ Thermal Desorption (ISTD), the Electro-Thermal Dynamic Stripping Process (ET-DSP™), which is an advanced form of electrical resistance heating, and Steam Enhanced Extraction (SEE) have been demonstrated effective in treating source zones with limited access and those adjacent to or beneath buildings and other infrastructure.
Thermal Conduction Heating (TCH) is applicable in fractured rock and other complex formations such as: Tight and fractured clays,Saprolite, Shale, Sandstone, Limestone, Dolomite, Fractured igneous and metamorphic rock, Permeable basalt, Karst limestone.
With a Vulcan® Systems Thermal Desorption Unit, Hydrocarbons are separated from the solids in the sludge. The treated solids have little to no residual hydrocarbons, resulting in an end product that can be disposed of easily and cost-effectively.
What makes our equipment unique? The ability to recover diesel or oil in a way which maximizes the resaleability of use as a fuel.
With a Vulcan® Systems Thermal Desorption Unit, hydrocarbons are separated from the solids in the sludge. The treated solids have little to no residual hydrocarbons, resulting in an end product that can be disposed of easily and cost-effectively.
RemBind 100 is a powdered adsorbent that binds strongly to per- and polyfluoroalkyl substances (PFAS) in soil, preventing them from leaching into groundwater where they can cause serious harm to the environment and human health. RemBind contains a patented blend of ingredients including aluminium hydroxide, carbon and clays. This mixture mimics and enhances the PFAS-binding capacity of natural soils.
We can help you achieve site closure and enable the sale or redevelopment of your site in a predictable timeframe with highly reliable results. This is made possible by: Our broad array of thermal remediation technologies, each tailored to the site-specific conditions and contaminants; Tested and proven field operations, processes, and teams; Expertise in designing projects to ensure outcomes without the need for further remediation; and, Our ability to assure a shorter project cycle and verification that goals...
Epcon is known in the industry for the Soil Remediation Oxidizer, including Hazardous and Toxic Spills. Epcon Thermal OxidizerSystems, which operate in a very safe manner, clean up the toxic chemicals from the ground. We pre-test and pre-assemble the majority of systems in our 150,000 Sq. Ft. modern shop.
It is estimated that there are over 3,000 former Manufactured Gas Plant (MGP) sites across the United States. Another 4,000 dot the landscape of Canada, the UK, continental Europe and Japan. These sites were built long ago on rivers or harbors, often on the outskirts of towns and cities; locations that are now frequently in close proximity to infrastructure, buildings and residential areas. Many underlie or abut valuable commercial, residential, and municipal properties, posing environmental hazards to ground and...
In 2004-2005 LIFETECH`s laboratory worked out an advanced oxidation process (AOP) for removal of dioxins and furans (PCDD/F), chlorophenols and other contaminants from the BCD process wastewater. Consequently, our technology was installed and from April 2006 successfully used in the `Spolana-Dioxins` Project at SPOLANA a.s. in Neratovice, Czech Republic, as a part of Special Wastewater Treatment Plant. Our supply consisted of an ozone generator with the output of 5 kg O3/h at 10% w/w ozone concentration, two...
Maximize ROI and Market Value of Brownfields Properties
TerraTherm provides rapid, thorough, and predictable remediation of Brownfields property. Our in situ thermal processes can ensure rapid closure, avoid delays, eliminate uncertainty, avoid excavation, and optimize property value. In situ thermal remediation is a reliable, lower risk, and less disruptive way to achieve your remediation goals.