Only show results available in Virginia? Ok

Vapor Intrusion equipment for Soil and Groundwater

  • Premium

    ULTRADRAIN - Model 6200 - Drainage Material

    ULTRADRAIN consists of an impermeable polymeric sheet cuspated under heat and pressure to form a high flow dimpled drainage core. The core is then bonded to a layer of non-woven filter fabric. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core. ...

    By CETCO based in Wallasey, UNITED KINGDOM. from Drainage Material Product line

  • Premium

    HDPE Geomembrane - Model VI-20 - High-Performance Vapor Intrusion Barrier

    VI-20 is a 7-layer co-extruded EVOH geomembrane made using high quality virgin-grade polyethylene and barrier resins that provide unmatched impact trength as well as superior resistance to VOC vapor transmission. EVOH technology serves as a highly resilient underslab and vertical wall barrier designed to restrict methane, radon and other harmful ...

    By CETCO based in Wallasey, UNITED KINGDOM. from High-Performance Vapor Intrusion Barrier Product line

  • Premium

    LIQUID BOOT - Vapor Intrusion Barrier Systems

    High performance Vapor Intrusion Barrier Systems designed to meet your project requirements. LIQUID BOOT is a spray-applied, water-based membrane containing no volatile organic compounds (VOCs). With superior chemical resistance properties it seals all vapor intrusion pathways, preventing contaminated soil vapors from penetrating the slab. LIQUID ...

    By CETCO based in Wallasey, UNITED KINGDOM. from Vapor Intrusion Barrier Systems Product line

  • Premium

    GEOVENT - Active/Passive Gas Venting System

    GEOVENT consists of a three-dimensional vent core that is wrapped in a non-woven, needle punched filter fabric. GEOVENT consists of a three-dimensional vent core that is wrapped in a non-woven, needlepunched filter fabric. GEOVENT End Outlets are available for use in conjunction with GEOVENT active/passive gas venting systems.

    By CETCO based in Wallasey, UNITED KINGDOM. from Active/Passive Gas Venting System Product line

  • Premium

    LIQUID BOOT - Trowel Grade

    LIQUID BOOT TROWEL GRADE is a trowel-applied, water-based membrane containing no VoCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT TROWEL GRADE is installed in conjunction with the LIQUID BOOT vapor intrusion barrier to minimize vapor migration.

    By CETCO based in Wallasey, UNITED KINGDOM. from Trowel Grade Product line

  • Geo-Seal - Vapor Intrusion Barrier

    Vapor Intrusion Barriers need to balance two key characteristics: chemical resistance or how well the barrier protects against the chemical of concern, and constructability, the ability to effectively seal all entry pathways in a building.

    By Land Science Technologies (LST) - a division of REGENESIS based in San Clemente, CALIFORNIA (USA).

  • Retro-Coat - Vapor Intrusion Coating

    Vapor intrusion can cause significant uncertainty for building owners. Retro-Coat provides a simple and proven solution to a complex problem. Applying Retro-Coat can provide a building owner with long-term assurance that the vapor intrusion risk has been successfully mitigated, while at the same time, reducing the overall mitigation cost and ...

    By Land Science Technologies (LST) - a division of REGENESIS based in San Clemente, CALIFORNIA (USA).

  • Model SU60519 - Soil Vapor Intrusion Tube(SVI)

    125mg Carbograph™ 2, 125mg Carbograph™ 1 plus 65mg of Carboxen™ 1003. Sorbents are separated by 3mm plugs of glass wool. Carbograph™ 2 is equivalent to Carbopack™ C; Carbograph™ 1 is equivalent to Carbopack™ B. Volatility Range C2~C20

    By Camsco, Inc based in Houston, TEXAS (USA). from Soil Vapor Intrusion Tube(SVI) Product line

  • MODULO - Aerated Foundation Block for Vapor Intrusion Control and Soil Contamination

    MODULO is a single-use formwork for the construction of ventilated crawl spaces which physically separate the building from the ground. The system creates an under slab void that works as a capillary barrier against moisture - yet uses less concrete than other standard slab equivalents but has, at the same time, a superior load bearing capacity. ...

  • Cupolex - Vapor Intrusion Mitigation System

    Soil gas mitigation is increasingly considered as a pre-emptive strategy at sites impacted with volatile contaminants, radon or naturally-occurring biogenic gases (e.g., methane). For new building construction, there is a range of possible mitigation solutions, which often involve modification of the building envelope in contact with soil to ...

    By Pontarolo Engineering Inc. based in Vaughan, ONTARIO (CANADA). from Vapor Intrusion Mitigation System Product line

  • Entech Instruments - Sub-Slab Vapor Intrusion Sampler

    Entech understands the challenges and solutions for reliable collection of gas-phase compounds at the low to sub-PPB range. We provide powerful “Chromatography Grade” solutions from start to finish, giving you better data with greater confidence.

    By Entech Instruments, Inc. based in Simi Valley, CALIFORNIA (USA).

  • Vapor Intrusion Testing Services

    Environmental Systems provides VAPOR INTRUSION TESTING services which may be required.

    By Environmental Systems based in Point Pleasant, NEW JERSEY (USA).

  • Retro-Coat - Vapor Intrusion Technology

    Secondly, Retro-Coat is a recently introduced vapor intrusion technology from REGENESIS’ Land Science Technologies Division, whose widely used Geo-Seal composite vapor barrier system received the Environmental Business Journal (EBJ) Remediation Technology Award in 2008. Retro-Coat is a new chemical-resistant coating specifically engineered ...

    By Regenesis based in San Clemente, CALIFORNIA (USA). from Vapor Intrusion Technology Product line

  • VaporTrac - Sensor-equipped Telemetry Devices

    VaporTrac is a sensor-equipped field device that remotely monitors Vapor Intrusion Mitigation (VIM) systems and triggers a notification when a system failure is detected. VaporTrac transmits airflow, pressure (vacuum), power, and device temperature measurements continuously via cellular or WiFi communication networks.

    By VaporTrac based in Agoura Hills, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you