Waste & Recycling Applications

Genesis Water Technologies partners with leading property developers, facilities management companies and international construction/project management companies involved in the development of commercial, industrial and multi-family residential housing to integrate advanced grey water reuse, and disinfection solutions worldwide.

By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

One-of-a-kind, and fitted with integrated systems for dust reduction, MB`s range permit crushing operations to be carried out in enclosed spaces and areas with limited ventilation. Tunnel digs, underground systems and industrial warehouses are no longer a limit for on-site recycling. The efficiency of the entire MB`s range is constant both for indoor and outdoor use. A clear advantage, confirming the versatility of the range.

By MB Crusher based in Fara Vicentino, ITALY.

GCL can be used in highway and civil applications such as at airport de-icing facilities used to remove ice build up on the surfaces of planes. During the application process, glycol-based de-icing fluids can leak into local stormwater runoff, potentially causing pollution. CETCO GCLs were found compatible with de-icing fluid (glycol diluted 50/50 with water). GCLs can also be used to line roadway drainage swales for containment and prevent excessive percolation, thereby minimizing potential for groundwater...

By CETCO based in Wallasey, UNITED KINGDOM.

MB simplifies the working process, eliminating costs and reducing timing for the materials disposal and procurement process. By using MB`s range for digs, channelling, construction and maintenance of sewage, water and gas pipelines, the costs of loading and transporting materials to the landfill are eliminated completely, with significant savings in terms of money and time. Everything becomes simpler and less costly with the use of MB, which consent to reduce or even eliminate costs and time required for disposal...

By MB Crusher based in Fara Vicentino, ITALY.

MB`s range allows for the crushing, recycling and reusing of materials to create roadbeds, drainage beds and dig fills directly at the worksite, thus reducing the cost of material transportation. Characterised by reduced dimensions and weight, MB also proves to be the ideal choice for small urban sites, or when special attention to the surrounding environment or architecture is necessary. With MB to work in historical urban centres and important sites is no longer a problem, and it can offer a new source of...

By MB Crusher based in Fara Vicentino, ITALY.

Shred-Tech® has the perfect tool for shredding all types of construction and demolition waste: the HAAS TYRON 2000XL. This double shaft, primary, slow speed shredder is the newest and most powerful shredder in its class. With key features such as completely programmable shaft speeds, direction and reversing time, this high performance machine will shred even the most difficult of materials.

By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

Your infrastructure is essential to sustaining economic growth and improving quality of life. Our solutions address the entire transportation lifecycle, spanning planning, design, analysis, maintenance, and operation of roads, bridges, tunnels, drainage systems, and roadway assets. Bentley has provided solutions to highway agencies for over three decades. Our solutions are proven, trusted, and reliable, and will help you to create, manage, and renew your road assets on budget and on schedule.

By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).

The high pressure oil pump is assembled directly to the main system of the truck, allowing to eliminate the needs and the costs of expensive gear reductions, allowing multiple simultaneous high and low pressure drives, making full use of the powerful truck engine, eliminating the costs of additional engines, ensuring immediate availability of all drives.

By Neron Pumps based in Ranica, ITALY.

Mini-excavators, due to their most versatile applicability, can be ideal power station to allow high pressure cleaning, sandblasting, pipe cleaning and operation of ultra high pressure tools. Besides they are fully mobile, have their own energy source and can carry water along.

By Neron Pumps based in Ranica, ITALY.

One of the oldest industry sectors, the construction materials industry has developed a broad range of products that is constantly adapting to the state of technology and architecture: Concrete, thermal and moisture protection, masonry, plastics, composite materials and finishes, are all used in the erection of buildings and structures, and also as auxiliary materials on construction sites.

By Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control based in Graz, AUSTRIA.

These vehicles very sophisticated and expensive are preferably used in no-stop operation to pay out quicker. During working operations in the areas of the filling grid, in the mixing impeller, in the mouth piece and various internal surfaces of the container, the concrete can accumulate in any corners and edges and gets hard. On respect to the cleaning with hydroelectric acid, replaced because environmentally hazardous, or low pressure cleaning systems, replaced because causing large water consumption, the...

By Neron Pumps based in Ranica, ITALY.

Today`s construction industry focuses a great deal on underground drilling and support systems. These processes typically use drilling fluid or slurry techniques. Packaged mud recycling systems are designed to minimize solids waste for disposal and effectively clean drilling fluid and slurry for active reuse. Foundation Drillers utilize drilling fluids for stability of holes during operation. Mud reclaimers process the used drilling fluid for continuous use downhole and creates less solids waste.

By Elgin Separation Solutions based in Stafford, TEXAS (USA).

The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories: (1) Noise at Work (potential for noise-induced hearing loss due to long term exposure to noisy activities) (2) Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site...

By Pulsar Instruments Plc based in Filey, UNITED KINGDOM.

The high pressure pump used at the yard or on the road is absolutely necessary to: Clean the vehicle in all its parts, wheels, internal and external surfaces. Clean and cool the working parts during rebuilding of the new road asphalt. Plaster scarification. Rapid cleaning of hard asphalt or cement at ended operation.

By Neron Pumps based in Ranica, ITALY.

The use of work mobile platforms has become more and more common. Pressure fluid techniques quite often must be realized in mobile use at large working height or wide side extensions. Mobile work platforms can cover such application but they so far needed external power supply or additional power packs with difficult handling, expensive investments and large volumes and weight to be carried along with.

By Neron Pumps based in Ranica, ITALY.

P-80 Lubricants are used in the manufacturing and repair and maintenance of heavy-duty construction vehicles. Rubber assembly applications include bushings, leaf springs, chassis, and suspension components. P-80 Lubricants provide temporary lubrication to rubber or soft plastic parts.

By International Products Corporation based in Burlington, NEW JERSEY (USA).

Applications of Coulson Ice Blast for Building Restoration and Remediation sector: Ice Fire and Smoke Damage Water and Flood Damage Asbestos Removal (Negligible Airborne @ 0.035 mg/m3) Mold Remediation Adhesive removal Reversal of corrosive contaminates Wood Resurfacing General cleaning Brick Stone Concrete Tile Wood Metal Tank cleaning Tar removal Vintage aircraft cleaning Enhanced Ice Soot Lead Paint abatement

By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

For heavy equipment and equipment rentals, OilTrap is the answer for the treatment of your wash water. Contact us to learn how we can help get your wash water ready for recycle or discharge via sanitary sewer.

By Oiltrap Environmental Products, Inc. based in Tumwater, WASHINGTON (USA).

Concrete Cutting Contractors use our LP555SDT for saw slurry clean‐up. Concrete cutting using a Diamond Saw is the process of cutting expansion joints on freshly paved concrete roads. After cutting, water is used to eliminate dust thereby creating a slurry. This slurry has to be cleaned up due to EPA Regulations and the Vac-Tron vacuum excavator is the preferred clean-up method. Using water to create the slurry and then using the LP Series - Wet/Dry Industrial Vacuum Excavation System to eliminate any...

By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

transport conveyor system and accessories. screw conveyor

By Redball Technica based in Marikina City, PHILIPPINES.