Only show results available in Delaware? Ok

Chipping Equipment equipment for Waste and Recycling

  • Wood Chip Tanks

    The problem of economic storage of wood chips is now a thing of the past with our wood chips reinforced concrete round tanks.

    By Wolf System GmbH based in Osterhofen, GERMANY. from Wood Chip Tanks Product line

  • Large-Sack Filler

    For four positions, optimised for 1000 litre bags. Automatic.

    By Sweden Power Chippers AB based in Borås, SWEDEN. from Large-Sack Filler Product line

  • Tama - Extraxtion System

    It is a system that enables wood chip extraction from the storage silos. It is composed of leaf springs to move the sawdust, a horizontal auger fixed to the floor of the silos and a rotary valve that continuously unloads the material outside the accumulation volume in the desired point.

    By Tama Aernova Srl based in frazione Mollaro, ITALY. from Extraxtion System Product line

  • Model 6210 PTO - Chipper

    The Model 6210PTO has a large 10' x 14' infeed opening, and is built tough enough to easily handle branches up to 10' in diameter.  All continuous welds, cast iron, self aligning, greasable bearings and a 410 LB., 1' thick impeller, fully gusseted and balanced means this chipper will stay together for a lifetime.

    By Salsco, Inc. based in Cheshire, CONNECTICUT (USA). from Chipper Product line

  • Model 624XT - Chipper

    The Model 624XT was added to our extensive line of PTO Chippers in July of 2011.  This unit is a hydraulic feed version of our Model 624PTO Chipper.  The same rugged construction as all of our chippers, this unit will provide the customer with years of service with normal maintenance procedures.  The Model 624XT will require remote ...

    By Salsco, Inc. based in Cheshire, CONNECTICUT (USA). from Chipper Product line

  • Undertailgate Chip Spreader

    The Concord undertailgate chip spreader is a simple method to evenly spread aggregate up to 10 feet wide and can be easily transferred between trucks, with an adjustable sliding full width main door and individual 12 inch wide cutoff gates, a Concord chip spreader allows material output to be adjusted for not only quantity, but also location.

    By Concord Road Equipment Mfg. Inc based in Painesville, OHIO (USA). from Undertailgate Chip Spreader Product line

  • Undertailgate Chip Spreader

    The Concord undertailgate chip spreader is a simple method to evenly spread aggregate up to 10 feet wide and can be easily transferred between trucks, with an adjustable sliding full width main door and individual 12 inch wide cutoff gates, a Concord chip spreader allows material output to be adjusted for not only quantity, but also location.

    By Concord Road Equipment Mfg. Inc based in Painesville, OHIO (USA). from Undertailgate Chip Spreader Product line

  • Autolog - Canter Twin Optimizer

    The Autolog Canter Twin Optimizer allows for the best log scanning in the industry with its high frequency linear profile scanners.

    By Autolog, Production Management Inc. based in Blainville, QUEBEC (CANADA). from Canter Twin Optimizer Product line

  • Model 09 - Chipper

    Chipper a sharp angle that reduces the power consumption. Ideal for large yards pruning. The Chipper 09 is a special chipping model, which provides innovative technical characteristic. The specific inclination of the timber entering the chipping flywheel allows an easier cutting of material, reducing power and consequently fuel consumption.

    By Gandini Meccanica based in Guidizzolo, ITALY. from Chipper Product line

  • Big Chipper

    Turn your skid steer into a mobile work station. This attachment is ideal for commercial, residential, orchards, golf courses, etc., any place where you need to turn a pile of branches into a pile of chips. Easily placed into backyards and remote areas without creating damage to yards.

    By Quick Attach Attachments LLC based in Alexandria, MINNESOTA (USA). from Big Chipper Product line

  • Icarbazzoli - Model IB 26.Z47 - Loaders For Truck and Chipper

    Technical Features; Max moment : 29 KNm. Net rotation torque : 10 KNm. Rotation angle : 400s . Max overhang : 4.70 m. Service pressure : 190 Bar. Recommended flow of the pump : 30 It/ min. Weight (mthout terminal equipments) : 600 KG.

    By Icar Bazzoli Enzo s.r.l. based in Rebecco di Guidizzolo (MN), ITALY. from Loaders For Truck and Chipper Product line

  • Screw Doser

    Screw Doser for continuous feeding of following plant.

    By LEHMANN Maschinenbau GmbH based in Pöhl, GERMANY. from Screw Doser Product line

  • Knuckle - Model WL150 - Boom Wheel Loaders

    Weight : 55,000 lb (25,000 kg). Lift capacity : 10 000 lb at 30 feet. Reach : Up to 40 feet (12.2m). Engine : 165 H.P.(123 kW) Isuzu Turbo diesel engine. Traction : Four wheel drive with proven 6-speed Powershift transmission. Towing Capacity : Up to 100,000 lb (45 metric tons)

    By Tanguay based in Roberval, QUEBEC (CANADA). from Boom Wheel Loaders Product line

  • Rolly - Chipper

    The Risley Chipper is a unique product to eliminate unwanted vegetation in areas where “selective cuts” and “tree to chip” control is necessary. Applications include,pine beetle remediation, hydro vegetation management, seismic, fire guards and right of way clearing . Mounted on a Fellerbuncher or TimberPro based carrier ...

    By Risley Equipment based in Grande Prairie, ALBERTA (CANADA). from Chipper Product line

  • ECHO Bear Cat - Model CH45540 - 4.5 Inch PTO Chipper

    All models are built with heavy-duty, 7-gauge chipper housing and trailer construction. Each contains a double-banded belt drive and features a feed chute opening 13 x 14.5 inch. The 14 x 1 inch thick, 49 pound dynamically-balanced disc with cantilever design reduces wrapping while utilizing two reversible chipper blades. A 4.5 inch square ...

    By ECHO Bear Cat based in West Fargo, NORTH DAKOTA (USA). from 4.5 Inch PTO Chipper Product line

  • CM - Single Drive Chip Shredder

    The CM Single Drive Chip Shredder is a secondary shredder that can accept pre-shredded material from a primary shredder or it can be integrated into a system to produce the recycling industry's cleanest cut chips. Its proven technology processes up to 10 tons of pre-shredded tire material every hour.

    By CM Tire Recycling - a Columbus McKinnon Brand based in Sarasota, FLORIDA (USA). from Single Drive Chip Shredder Product line

  • Model SRH - Beating Rotor

    The MAIER Beating Rotor SRH is a solid and reliable machine for the production of recycling or fresh wood chips from pre-crushed industrial waste wood, pallets, reclaimed timber or saw mill residues as well as for the reduction of urban waste contingents. The output material can be used as high-quality input e.g. for the panel board industry or ...

  • Model TW PTO/150H - Power Take Off Chippers

    The Timberwolf TW PTO/150H with emphasis on exceptional crushing power gives the ultimate chipping efficiency, perfect for landowners, estates and golf clubs. This PTO chipper with self-contained hydraulic system delivers a superb chipping performance. The chipper will fit onto any tractors fitted with a 6-spline 540rpm PTO shaft, Category 1 ...

    By Timberwolf based in Stowmarket, UNITED KINGDOM. from Power Take Off Chippers Product line

  • Switch-N-Go - Chipper Body

    Switch-N-Go chipper bodies are available in six standard lengths, from 9 to 14 feet long, with capacities from 8 to 17 yards. Additionally, Switch-N-Go® chipper bodies come in three classes, standard, medium duty and heavy duty. These containers all come with our top quality powder coated finish which is boosted by our triple stage ...

    By Switch-N-Go a division of Deist Industries, Inc. based in Hadley, PENNSYLVANIA (USA).

  • Auer - Wood Chip Blower

    Wood chip blower with suction hose and motor. Blower with 11 kW motor (32 A slow-/C-D fuse). Max. suction hose length 4 m/d = 250 mm.

    By Auer Landmaschinenbau GmbH based in Hellmonsoedt, AUSTRIA. from Wood Chip Blower Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you