Only show results in Virginia? Ok

Construction Waste Applications

  • Premium

    Jaw bucket crushers for quarries and mines

    MB proves to be an essential solution for organisations working in quarries and mines. The largest models of the range have been designed and constructed in order to satisfy the operator requirements: high performance, in terms of hourly production capacity, combined with resistance over time. Used to process waste materials from extractions, they are essential for the re-qualification and maintenance of quarries and mines through the construction and management of the internal transportation network, the...

    By MB Crusher based in Fara Vicentino, ITALY.

  • Premium

    Waste sorting solutions for the construction & demolition waste

    The growing demand for high-value secondary materials renders high quality recycling increasingly attractive. Thousands of tons of recyclable materials from construction and demolition (C&D) activities are sent to landfill every day, resulting in increasingly higher costs - and lost profit.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Jaw bucket crushers for demolition work

    MB`s crusher bucket in the demolition field allows for crushing, recycling and production of materials ready to be re-used directly on the same worksite, or sold. MB eliminates transport and disposal needs of materials from demolition of residential buildings, industrial structures, reinforced pillars and railway sleepers. MB provides immediate advantages, not only economic (elimination of demolition material handling and transportation costs), but above all eco-friendly.

    By MB Crusher based in Fara Vicentino, ITALY.

  • Premium

    Jaw bucket crushers for tunnels and enclosed spaces

    One-of-a-kind, and fitted with integrated systems for dust reduction, MB`s range permit crushing operations to be carried out in enclosed spaces and areas with limited ventilation. Tunnel digs, underground systems and industrial warehouses are no longer a limit for on-site recycling. The efficiency of the entire MB`s range is constant both for indoor and outdoor use. A clear advantage, confirming the versatility of the range.

    By MB Crusher based in Fara Vicentino, ITALY.

  • Premium

    Mining & minerals solutions for sand aggregate industry

    WesTech provides process equipment for the sand aggregate industries including thickeners, screening and separation, and mixing technologies which provide for production of cement, and a myriad of materials for the construction industries.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Jaw bucket crushers for urban job site and road works

    MB`s range allows for the crushing, recycling and reusing of materials to create roadbeds, drainage beds and dig fills directly at the worksite, thus reducing the cost of material transportation. Characterised by reduced dimensions and weight, MB also proves to be the ideal choice for small urban sites, or when special attention to the surrounding environment or architecture is necessary. With MB to work in historical urban centres and important sites is no longer a problem, and it can offer a new source of...

    By MB Crusher based in Fara Vicentino, ITALY.

  • Premium

    Jaw bucket crushers for recycling industry

    MB is the ideal solution for recycling all types of aggregate on site. With the use of screening buckets, it is possible to recycle, prepare and obtain materials from different types of processes, which can be used directly in the worksite, or sold. Not having to transport and dispose the material but instead being able to reuse it immediately, grant for significant savings and advantages in terms of sustainability and respect for the environment. Fills and new constructions can be carried out with the same...

    By MB Crusher based in Fara Vicentino, ITALY.

  • Premium

    Crushing of mixed construction waste with Mercodor crushing systems

    The crushing of construction waste serves for the recycling of important raw materials. With the Mercodor crushing machines, the crushing of edge strips, concrete fragments, bath material, but also the crushing of sealing material, carpet edge strips or styrofoam and wallpaper rest rolls is no problem. Since, generally, the raw materials become more and more scarce, it becomes increasingly important to recycle the raw materials as much as possible when handling these resources.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Crushing of synthetic materials and plastics with Mercodor crushing systems

    The Mercodor crushers with their robust and compact cutting heads offer the correct solution for any work. The robust construction of our crushing equipment and the practically maintenance-free operation with a high level of effectiveness accompanied by low energy consumption are distinguishing our crushers.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Polymers for Geomembranes/Primary & Secondary containment industry

    EPT XTRM PLY Geomembranes provides the widest range of products for your geomembrane applications. The combination of various polymers, fabrics, and widths provide you with endless design options for your project. Forty plus years of experience matching p

    By Engineered Polymer Technologies (EPT) based in Hillside, NEW JERSEY (USA).

  • Dry bulk material processing for the cement industry

    The manufacture of cement combines a variety of raw ingredients such as limestone, clay or shale. These raw materials are extracted from the quarry crushed to a very fine powder and then blended in the correct proportions. The resulting raw mix is fed into a cement kiln which heats them to extremely high temperatures of about 1400 C to 1500 C. The abrasiveness of the material is a major factor on the wear of equipment and the extreme high temperatures of the process require specialized equipment.

    By Wm. W. Meyer & Sons, Inc. based in Libertyville, ILLINOIS (USA).

  • Recycling Equipment for Construction & Demolition Waste

    Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operating costs and achieve an optimal return on investment.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Solvent Recyclers and Cleaners for the Construction Industry

    We design solvent recyclers and washers to clean and maintain tools and filtration equipment used for the maintenance and construction of bridges, buildings, antennas, turbines and other structures requiring regular cleaning. Establish a new corporate image, clean old traces left by time or add new protective covering to a surface – whatever your need, we offer a complete range of equipment that gets the job done easily and effectively.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Odor control solutions for public commercial buildings

    Every city and town in North America, South America, Europe, Middle East and the Pacific Rim is a target rich environment and susceptible to odor control concerns. Look no further then the nearest apartment complex, hospital, hotel, fast food outlet or retirement home. Shopping malls, grocery stores and entertainment complexes are also likely clients and application areas. Stop to consider the number of food processors, manufacturing/industrial operations, waste haulers, landfill or wastewater treatment sites in...

    By Ecolo Odor Control Technologies based in Toronto, ONTARIO (CANADA).

  • Wood waste processing

    Between land clearing, construction, and tree care, tons of wood waste is produced around the world. Managing this wood waste is one thing – turning it into a useful by-product requires innovative solutions, like the ones you get from Vermeer.

    By Vermeer based in Pella, IOWA (USA).

  • Laboratory equipments for fluorine in industrial & construction waste

    Measuring Fluorine in Industrial and Construction Waste using Benchtop NMR MQC Analyser. Processing and recycling of industrial and construction waste often requires measuremetns of fluorine content in the materials. It mostly relates to monitoring potential emission of toxic fluorine gas and optimisation of the waste processing. Our benchtop NMR analyser MQC systems provide a fast, simple and accurate method of measuring fluorine in liquid and dry waste. The NMR technique does not require the use of any...

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Bins for cooking fats, oils, food wastes, liquid slops, slaughterhouse wastes and animal by-products

    The FATBOXX and FATBOXX max are perfectly new waste bins for disposing of cooking fats, oils, food wastes and liquid slops and slaughterhouse wastes and animal by-products. The special construction of the body and lid offer many benefits for end consumers and waste management companies.

    By P. Henkel GmbH based in Kreuztal, GERMANY.

  • Reliable Shredding Technology for Organic Waste

    Our organic waste shredders process biological and biogenic waste to generate an optimal substrate for further utilisation in your biogas plant or in your disposal business. The application area ranges from green or garden waste to food waste and expired goods including packaging to slaughterhouse waste. Non-homogeneous or organic waste in pieces including packaging must be shredded to prepare it optimally for fermentation. Our low-speed

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.

  • Shredding solutions for big bags

    Made of polyethylene raffia fabric (PE) or polypropylene (PP), as well as in jute or non-woven fabric, this kind of containers are used in different industries: from material handling (raw materials food, building construction material, just to name a few). Once finished their life cycle, the big bags are reconditioned and reused or recycled in order to retrieve the polypropylene. The SatrindTech shredders are used in the different phases of the recycling process in order to prepare the material for the...

    By SatrindTech Srl based in Arluno, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you