Only show results in Virginia? Ok

Grinding Equipment Services

  • Premium

    Pre-Engineering Service

    CTP offers the following services in Pre-Engineering: Feasibility Studies, Layouts, Cost Estimation, P+I Diagrams, HAZOP Studies.

  • Premium

    Clinker Cooler and Pre-Heater Dedusting

    The control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler, is usually a problem for cement plant managers.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL. from Emission Control & Air Dedusting Service line

  • Premium

    Feed Water and Pre-Treatment Tests for Laboratory Service

    In order to optimise the operation of a membrane plant it's essential to fully understand the chemical nature of the feed water. From statistical analysis of the results of membrane autopsies we've carried out over the past ten years, we have concluded that more than 50% of membrane fouling and failure events result from inadequate pre-treatment. ...

    By Genesys International Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Pre-Treatment for Desalination

    For desalination plants it is of great importance of the operation of the entire plant that good pre-treatment of water takes place before the salt is removed. For reverse osmosis (RO) desalination plants, satisfactory pre-treatment is essential for avoiding membrane fouling. Membrane fouling may result in reduced water ...

    By Filtralite Saint-Gobain Byggevarer As based in Alnabru, NORWAY.

  • Grinding (Shredding)

    Our recycling facilities enable us to handle plastic waste of all forms and sizes from post production, post industrial and post consumer use. Where sorted materials are size reduced in to small pieces using high capacity crushers that are able to crush lumps up to 125cm diameter.

    By Middle East Waste Management Limited (MWM Ltd.) based in Jeddah, SAUDI ARABIA.

  • Plastic Toll Grinding Services

    Special Waste Systems, Inc. toll grinding services offers you a cost effective way to handle your scrap plastic for reuse. Reduction sizes to 3/8' regrind. All regrind in almost new gaylord boxes with heavy mil liners and topped for added cleanliness of your product. Accepted materials include scrap material, purgings and defective parts of ...

    By Special Waste Systems, Inc. based in Tipp City, OHIO (USA).

  • Wood Grinding Services

    The recycling of wood has a very important role in the reuse of the same for industrial purposes or use for the production of renewable energy. In both cases the quality of the grinding and the purity of the material is fundamental, which must be free of metals and other contaminants.

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Grinding and Recycling Services

    Wood Recycling. Shingle Recycling. Land Clearing. Custom Grinding Services New and Used Equipment.

    By Waste LogiX based in Brechin, ONTARIO (CANADA).

  • Pallet Grinding

    WSM is the leader in supplying pallet and wood waste grinding systems to the pallet industry. From our High Torque Grinders in both hopper feed and horizontal feed configurations — to high volume fiber processing systems with Horizontal Hogs — to the 'Brute' portable grinder, WSM provides effective solutions for converting expensive ...

    By West Salem Machinery Co.(WSM) based in Salem, OREGON (USA).

  • Pre-Commission Cleaning of Pipework Services

    The pre-commission cleaning of closed loop systems has become more important over recent years; due to the equipment used being more susceptible to blockages at strainers, control valves and small bore pipework.System contaminants such as millscale, jointing compounds and fabricating debris need to be removed by chemical cleaning and high velocity ...

    By HBE Risk Management based in Newry, NORTHERN IRELAND.

  • Back Grinding Services

    Back grinding is a process that removes silicon from the back surface of a wafer.  SVM provides grinding on our own substrates or on customer supplied wafers. We process bare and device patterned wafers with high yield and offer wafer thinning to customer specifications.

    By Silicon Valley Microelectronics, Inc. (SVM) based in Santa Clara, CALIFORNIA (USA). from Wafer Services Service line

  • Pre-Acquisition & Due Diligence Services

    The In-house Sirius team provide advisory support and investigation and assessment services for our clients as they acquire and dispose of land, property and assets.Our advisory  teams work with clients to assess portfolios, individual sites and property assets, providing advice throughout the process and cost and risk advice to be used in ...

    By The Sirius Group. based in Leeds, UNITED KINGDOM. from Design and Advisory Service line

  • Pre-Engineering

    Optimisation starts with a rough planning of the project. In cooperation with you, we develop the basis for making a decision on the required solution approach.

    By Straub Werke AG based in Wangs, SWITZERLAND.

  • Pre and post-sales assistance

    Our technical and commercial departments are able to advise you on the best solution for specific customer requests, from planning to the final setup. You can ask us for assistance and programmed or extraordinary maintenance, relying upon prompt delivery spare parts.

    By Aron S.r.l. based in Taranto, ITALY.

  • Pre-Construction Service

    We can help your project get off to a safe start, even before breaking ground. Our years of experience in the field can prevent costly errors in planning, contractor and subcontractor selection, and safety plan implementation. Among the many pre-construction services we offer, are bid document review, contract review, program management, ...

    By SafeCon Consulting Group, Inc. based in San Diego, CALIFORNIA (USA).

  • Pre-Engineering / Elaboration of System-Adapted Concepts

    Once all required factors are known, we start elaborating system-adapted solutions. In analyzing and selecting the suitable process, we take into account all angles, as, e.g., relevant cost parameters (investment costs, operating costs and resulting costs), advantages, future viability, spatial situation, optics, etc. Thanks to our many years of ...

    By DrySoTec GmbH based in Essen, GERMANY.

  • Grind Services

    Tanks to the volumetric reduction of this kind of solid waste, offering fiscal benefit.

    By SIECO.srl based in Viterbo, ITALY.

  • Pre-manufacturing Services

    We prefabricate complete plant parts as modules, which enables us to work efficiently. Consequently, there are no long construction times or interruptions for the customer. The modules are assembled in our in-house assembly shops and all relevant services are controlled and monitored by our experienced site managers.

    By Ruland Engineering & Consulting GmbH based in Neustadt, GERMANY. from Construction Services Service line

  • AERC - Pre-Paid Recycling Kits

    AERC's Pre-paid Return Program offers a comprehensive recycling service for commercial, institutional, municipal, and governmental waste generators. Our services are competitive, cost-effective, and compliant with all federal, state, and local Regulations

    By AERC Recycling Solutions based in Allentown, PENNSYLVANIA (USA).

  • Well-Bore Cleaning (eg Cementing Pre-Flush)

    OTI oil cleaning and recovery products offer the same or better performance than existing chemical treatments but with a much reduced environmental impact. Independent assessment shows OTI products outperforming existing chemical treatments, for example in the recovery of heavy oil from oil sand and the removal of hydrocarbons contamination from ...

    By OTI Greentech AG based in Berlin, SWITZERLAND. from OTI Energy Solutions Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you