Only show results available in Virginia? Ok

Hazardous Waste Treatment equipment for Waste and Recycling

  • Feeders

    Komar's Shred-Feed industrial feeder systems are capable of complete processing of all types of waste materials. These systems can reduce waste to defined piece sizes and then feed the product through to thermal or chemical destruction. These shredder/auger industrial feeder combination systems are ideal for handling hazardous or special waste ...

    By Komar Industries Inc. based in Groveport, OHIO (USA). from Feeders Product line

  • SID - Plants for Hazardous Waste

    Shredding installations integrating a rotary shear, a mixer, a pump, interlocking chambers, blanketing device with N2 and measurement of residual O2 concentration, skip, etc. Complete system for the pre-treatment of hazardous waste.

    By SID SA based in St-Sulpice, SWITZERLAND. from Plants for Hazardous Waste Product line

  • Imabe Iberica - Urban, Industrial, Toxic Waste Treatment Plants - Waste Recovery Plants

    Imabe iberica experience includes all development of different waste treatment plants, including turn key projects designed for waste sorting, waste treatment and waste recycling of solid urban waste (suw), industrial waste, hazardous waste and single stream waste projects.All sorting process is done fully integrated: design, manufacture, assembly ...

  • Hazardous Waste Treatment System

    AVA has developed systems for pre-treating hazardous waste prior to incineration, which leads to higher throughput performance in combination with lower construction and maintenance costs and additional low pollution emissions, in comparison to conventional techniques. The system is based on the principal that constant gross calorific values and ...

    By AVA GmbH u. Co. KG based in Herrsching, GERMANY. from Hazardous Waste Treatment System Product line

  • Hazardous Waste Unit

    Hazardous waste is a matter of concern to the environment and to society at large, and treating it appropriately is VINCI Environnement’s business. Hazardous waste comes from a wide variety of sources, including industrial production, oil residue, polluted ground, or, by extension, infectious medical waste. It comes in many forms: solid, ...

    By VINCI Environnement based in RUEIL MALMAISON cedex, FRANCE. from Hazardous Waste Unit Product line

  • Hazardous Waste

    Advantage Waste Brokers have broad experience in testing; classification; handling; transport and disposal of most types of hazardous waste. We are informed and conversant with current UK legislation, offering compliant solutions that utilize the most efficient and advanced technical and technological solutions available. We offer our customers ...

    By Advantage Waste Brokers Ltd based in Worcestershire, UNITED KINGDOM.

  • ReDOC - Clays Technology

    ReDOC is a range of advanced E-Clay products suitable for application to the pre-treatment of waste streams, including soils, prior to landfill. The product range was developed to treat complex wastes with high leachable Dissolved Organic Carbon (DOC) content in order to meet Waste Acceptance Criteria (WAC) for disposal to stable non-reactive and ...

    By Envirotreat Technologies Ltd based in Kingswinford, UNITED KINGDOM.

  • EKE - Model EDI - Electrodeionization Systems

    Continuous Deionization (CDI) system is a new approach to elecrodeionization system (EDI) taking the place of conventional mixed bed technology with the important advantages it presents. None of the regeneration chemicals are needed. Hazardous wastes aren’t formed. Required water quality can be obtained with continuous operation and ...

  • OZONATOR - Model NG-3000 - Medical and Bio-Hazard Waste Treatment Technology

    The OZONATOR is the complete solution to your bio-hazardous waste needs. With zero emissions, ease of operation, quick cycle time and low operating costs the OZONATOR is not only a better solution but also a more cost-effective solution. The functional part of this system is a combined process that loads un-segregated, bio-hazardous waste directly ...

    By OZONATOR Industries Limited based in Regina, SASKATCHEWAN (CANADA).

  • Waste Treatment Plants

    The attention to the environment, the evolution of the industrial processes that generate newer and newer types of waste, the need to reclaim large areas polluted by abandoned industrial activities, combined with constantly changing regulations, bring constant new challenges to industry operators in order to treat waste efficiently. Simem realizes ...

    By Simem based in Minerbe, ITALY.

  • Nuclear Services

    The Nuclear Services Segment provides radioactive, hazardous and mixed waste services to hospitals, research laboratories, institutions, nuclear utilities and numerous Federal agencies including the Departments of Energy and Defense. The Division has developed the most advanced treatment technologies available in the industry

    By Itronics Inc. based in Reno, NEVADA (USA).

  • Bondtech - Shredding Systems

    Serving the Medical Industry with Quality Products. Bondtech engineers have provided solutions to a wide variety of hazardous waste destruction problems; including PCB Contaminated Materials, Radio-active Waste, Chemical Weapons and Medical Waste.

    By Bondtech Corporation based in Somerset, KENTUCKY (USA).

  • Odor Removing and Smoke Capturing System

    Remove unpleasant odors by chemical process.  Low maintenance. Easy and cheap operation. Non-hazardous waste. Good for: restaurant, WC, sheds, poultry houses, waste water treatment plants, rendering plants, garbage burners.

    By KARE Engineering based in YAKAPINAR ADANA, TURKEY.

  • Model EZ FLOK - ROCS Systems

    EZ FLOK waste treatment program - the quickest solution available for your small to medium sized waste stream (1-25 gpm) with headers to run off peak hours for increased daily capacity. Larger flow rate quotes available upon request. EZ FLOK is a blend of enhancement polymers and clay that have an enormous and eager appetite for most contaminants ...

    By Environmental Process Systems Inc. (EPSI) based in Willow Spring, NORTH CAROLINA (USA).

  • Inspection Systems

    Non-destructive testing is crucial to ensure the safety of nuclear components and waste shipments. PaR Systems' LaserUT, x-ray radiography systems and positioners use the latest technology in nuclear product and waste container real-time inspection. PaR's inspection systems for hazardous environment applications are utilized to inspect radwaste ...

    By PaR Systems, Inc. based in Shoreview, MINNESOTA (USA). from Inspection Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you