Only show results available in Virginia? Ok

Industrial Shears Applications

  • Premium

    Reliable Shredding Technology for Metal-processing Industry

    Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores.  Our sturdy rotary shears that have been tried and tested a thousand times over, reliably and efficiently shred light metals such as aluminium, magnesium, Al-Mg alloys, copper or nickel, as well as harder metals such as iron, zirconium, titanium and sheet steel.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Recycling equipments for cable recycling

    Eldan Recycling has been active within cable recycling close to 60 years. What started with cable cutters, has expanded into including cable strippers, alligator shears and ACSR shears as well as machines and complete plants for processing of cables. Since copper and aluminium is 100% recyclable without loss of quality recycling of cable has always been a popular field.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Reliable Shredding Technology for Pulper Ropes

    In addition to a homogenised granulate of your residual products, our customized shredding systems guarantee an optimal pre-product for further recycling or thermal utilisation in your plants. Pulper ropes or the reject are secondary raw materials that are created when waste paper is recycled. The pulper ropes must not be landfilled due to their material composition and must therefore be recycled accordingly – in most cases through shredding and subsequent separation of metals, glass and stones, etc. Our rotary shears or 2-shaft shredders together with our 4-shaft technology are very well suited for this application case. The advantage of the 4-shaft machines lies in the fact that the pre- and re-shredding occurs in one process step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Wood shredding

    SSI Shredders and Reducers are an effective solution for high capacity primary processing of mixed wood for metal liberation and recovery, or bulky item reduction. SSI Shredding Systems has a number of customers processing large wooden items. PRI-MAX reducers are ideal machines to turn mixed, bulky wood waste into “floable” material streams that can be sorted and converted into usable products or energy sources for industry.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    SSI builds shredding systems for alternative fuels processing

    SSI designs and manufactures size reduction systems to prepare solid wastes for thermal treatment or conversion to alternative fuels. SSI Shredding Systems, Inc. has been developing and refining a wide range of products and engineered system solutions to convert waste materials into usable fuels for industry. SSI has the experience, product range and desire to exceed your expectations.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Dry bulk material processing for the plastic industry

    Over the years, plastics have become the most dominant engineering material for most products.  All plastics are polymers; these polymers are further divided into two basic types: thermoplastics and thermosets. Extrusion can be used for thermoplastics. The raw material is in the form of pellets, granules, or powder. Meyer rotary valves are designed and engineered for dependable and reliable performance. The precision-engineered housing and rotor prevent material from getting jammed or sheared.

    By Wm. W. Meyer & Sons, Inc. based in Libertyville, ILLINOIS (USA).

  • Premium

    Electronic scrap processing & shredding

    SSI manufactures shredders and automated systems to efficiently process all varieties of electronic scrap for recycling, reclamation and recovery. With many successful customers operating around the world, SSI has found the best electronics scrap processing system design philosophy is to employ machinery to separate commodities at the first point they become marketable, at the highest capacity possible, and refine high value materials after initial separation.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Scrap Metal Recycling

    Recognized as an industry leader in shredder recycling, we operate 50 recycling facilities for metal, green waste, plastic, food waste, rubber, tires, RDF waste. Harden’s facilities are designed with safety and efficiency in mind for both employees and customers. Our equipment is maintained and updated regularly and our scales are calibrated quarterly. The properties of metals provide unique benefits and advantages for their recycling. Unlike other recycled materials, such as paper and plastic, metals can be repeatedly recycled without degradation of their properties. Metals from secondary sources are just as good as metals from the primary sources. The scrap metal recycling lines are extremely heavy duty systems designed for processing scrap steel, electronic waste, aluminum castings and profiles, ect. We offer both medium and high capacity plants which benefit from low maintenance & operational costs, and lower capital investment when compared with the traditional systems.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Plastics & textile shredding

    SSI manufactures a variety of low-speed, high-torque 1, 2 and 4-shaft shredders specially suited for size reduction of plastics and textiles. SSI has many shredders installed in plastic processing applications ahead of granulators to downsize bulky, difficult to manage or compressible materials before additional processing and recycling. We also have many shredders employed converting plastic materials into usable fuel sources for industry.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Scrap Shear 600T/1000T/1500T

    Capable of Daily 24 HRS Operation - 1000T Model Capacity of Light Scattered Scrap Iron - Over 20t/hr - Economical & Versatile for wide range of scrap types - High Efficiency Performance - Capable of Daily 24 HRS Operation#11; - Cylinders Remove & Repair : No Need#11; - Blade Clearance: Adjustable - Built-In Steel Oil Pipes – No damage by outer force - Cylinders - SGS-CE Qualified#11; - Advanced Technology Applied#11; - Top & Side Pre-Compressing Process#11; - Cycling Auto-Cutting: Only one operator required#11; - Excellent Capacity Assurance#11; - Lowest Electricity Consumption - Lowes Operation Cost - Qualified Materials in Production - Ultra Strength Structure: Wear-Resistance Steel -Protection#11; - Easy & Economical Maintenance#11; - Extremely Long Life Span - Runs well over 30 years - Smart Move of Feed Tank Impeller - Roller Wheels Built In - Blade & Holder Protection : Thick Steel Blade Sheaths Built In - Unique Screwed Blade Assembly [ Easy to Replace the Blade ]

    By Hua-Wei Machine Taiwan based in Taipei, TAIWAN.

  • Systems for the scrap metal industry

    From small recycling yards to huge regional processors, every scrap yard has a different mix of materials, volumes and demand cycles. And your equipment collection should be precisely prescribed to match. Having the right stable of balers, shears, wire strippers, choppers, shredders and other assets is crucial to running a perfect processor. Ensuring you can scale up through growth and expansion is even more critical to your future success. OBC has maintained many long-term relationships with scrap metal processors, and can leverage this experience to help you craft the best configuration of equipment to serve your specific needs.

    By OBC Baling Equipment based in Cleveland, OHIO (USA).

  • Metal cutting for the metal recycling industry

    Because metal scrap arrives for re-melting in many forms, it must first be processed. Heavy, bulky scrap should be densified and sheared in a guillotine scrap shear.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you