Only show results in Virginia? Ok

Municipal Solid Waste (MSW) Applications

  • Premium

    Recycling Systems for the municipal solid waste processing sector

    MACPRESSE products revolutionized the way the solid waste is transferred and processed.Used in different environments, our machines innovate and optimize the traditional process of waste disposal. In fact, different materials such as municpal solid waste is treated and compacted before transferring them from the transfer stations to landfill sites. This way, there’s no risk of land contamination and bad-smelling liquid formation – attracting vermin –when waste is not pre-treated ,collected in transfer stations and delivered to landfill sites.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Odor control for municipal and government

    Eliminating industrial odors naturally is our civic duty. To handle the odor control needs of municipal and government agencies, OMI Industries has created MUNI odor neutralizing product. Similar in many ways to its siblings in the Ecosorb products line, Muni odor control product uses Van Der Waals forces to chemically react with malodor molecules to eliminate odors combined with a natural formulation that makes it safe to work with. What’s more, the Muni product is surprisingly economical to use. It was specially developed to meet the tight budget limitations faced by municipalities without skimping on industrial odor control effectiveness.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Complete solutions for the recycling industry

    For over 40 years, Macpresse designs and manufactures complete solutions for the recycling industry. From individual technologies, i.e. balers, shredders etc. right up to complete sorting plants and Material Recovery Faclities.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Waste recovery for energy & utilities

    In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental impact. This fly ash is subject to Air Pollution Control as it is contaminated with extremely high concentrations of heavy metals and toxic compounds like dioxins, linked to cancer and other health problems. Tetronics offers valuable waste recovery plants that can eliminate the hazardous element within the fly ash while generating an inert building aggregate with the remaining material.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Recycling equipments for shredding solid waste & municipal solid waste

    Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become more effective, economic and efficient. Shredded and compacted waste is easier and cheaper to transport and extends the life of the landfill. In addition, separating out materials that can be reclaimed and recycled or that need to be incinerated or composted increases the landfill productivity while providing revenue to offset the costs of processing the solid waste.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for municipal solid waste (MSW) recycling

    During recent year it has become increasingly evident that an alternative energy sources has to be explored. RDF (Residual Derived Fuel) uses the energy content of the traditional household waste in order to substitute fuel. The production of RDF is the optimum solution both environmentally and economically. To optimize the process, it is important to reduce the waste volume into a homogeneous fraction size of e.g.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Mixed Municipal Solid Waste Sorting

    Traditional (manual) or semi-automated techniques, however, are only able to recover low levels of separate materials from mixed municipal waste streams and mean considerable content going to landfill. In contrast, TOMRA Sorting’s fully automated, state-of-the-art, sensor-based municipal sorting systems convert complex and varied - even dirty - municipal solid waste streams into high quality, separated, marketable output. The systems also make manual sorting unnecessary, thus reducing labor costs and material loss, while increasing efficiency. Operationally, through using detection techniques such as near infrared (NIR), x-ray transmission (XRT), color line cameras and metal sensors in combination.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    SSI builds shredding systems for alternative fuels processing

    SSI designs and manufactures size reduction systems to prepare solid wastes for thermal treatment or conversion to alternative fuels. SSI Shredding Systems, Inc. has been developing and refining a wide range of products and engineered system solutions to convert waste materials into usable fuels for industry. SSI has the experience, product range and desire to exceed your expectations.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Waste shredding for the waste RDF line

    Waste of all kinds is now considered a potential energy source and an important growth market for stationary shredder technology. Most plastic and paper waste RDF (refuse-derived fuel) plants have specific requirements regarding shredding capacity, grain size and operating reliability to ensure reliable and consistent production. Because of its ability to conform to the most stringent guidelines, Metso shredder equipment is increasingly in demand by this sector.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Recycling Equipment for Municipal Solid Waste

    Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operatingcosts and achieve an optimal return on investment.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Decentralized RDF/MSW power plants

    A local WtE CHP solution for every town / city. Technical team, led by Lambion company, has successfully delivered and installed over 3000 projects in the last 90 years in field biomase and waste fuels Fully EU Standards compliant Engineering supply chain is in place and ready Full understanding of legal, planning and environmental compliance and procedures Projects can be 13 / 21 / 25 MWth (input) systems. Waste streams can be Municipal waste, Industrial waste, Medical waste or Wood waste Typical customers are: Municipalities, Private owned comp. Paper and chemical industries Hospitals Forestry industry

    By LAMBION Energy Solutions GmbH based in Bad Arolsen, GERMANY.

  • Solid Waste Collection

    We provide equipment for municipal solid waste collection. Including but not limited to commercial front loaders, automated side loaders, rear loaders, recycling trucks, grapple trucks, Dump Loc body supports, and X1R lubricators for the solid waste industry, recycling and bulky waste collection.

    By JLM Equipment based in Lake Wales, FLORIDA (USA).

  • Industrial shredders for CIW/MSW/BW/HW industry

    CIW : Common Industrial Waste, MSW : Municipal Solid Waste, BW : Bulky Waste, HW : Hazardous Waste. All the dies of valorization/recycling of the CIW/HW start with a primary step of shredding. Since shredder 50-02 to the 12-02, according to the type of waste to be shredded, flow and required granulometry, Préciméca offers the machine adapted to your needs. Possibility of turn-key installation (handling, shredder, clasifier, magnetic seperation, etc.) or supply of single shredder, consult us!

    By PRECIMECA Environnement based in Toulouse, FRANCE.

  • Recycling Equipment for Waste to Energy

    Create high-value RDF with MSW and C&I waste; Optimising the output in terms of economic value and against the lowest possible costs per tonne is the short-term goal for every single system that Bollegraaf provides. The benefits: permanently low operating cost and lowest cost per tonne. The result: fast return on investment.

    By Bollegraaf Recycling Solutions based in Appingedam, NETHERLANDS.

  • Biomass collection for the municipal solid waste industry

    Vermeer is helping municipalities take advantage of the new and emerging opportunities in biomass collection. Biomass is defined as any organic material made from plants or animals and includes items such as urban wood waste, forestry residues, perennial grass crops, agricultural residues and municipal solid wastes.

    By Vermeer based in Pella, IOWA (USA).

  • Energy and Fuels from Municipal Solid Waste (MSW)

    Municipal Solid Waste (MSW), which includes household waste, is the residual waste put into a black bin bag or wheelie bin. MSW contains a mixture of recyclable, organic, inorganic and biodegradable materials. We recover as many recyclable materials as possible before drying and shredding the remainder to make a Refuse Derived Fuel (RDF) for the process. Our energy from waste process, Gasplasma®, transforms the RDF into a clean hydrogen-rich synthesis gas (syngas).

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you