Only show results available in Virginia? Ok

Non-ferrous Metal Recycling Applications

  • Premium

    Temperature measurement and control devices for non-ferrous metals industry

    TTEC thermocouples are used in various Non-Ferrous Metals Industries to accurately measure high temperatures under harsh conditions. TTEC Series 2000 Industrial Assemblies are used to measure molten metal temperatures in smelting applications. TTEC Series 1000 TECPAK thermocouples are used in large processing facilities to provide accurate Furnace Temperatures. The TTEC # 10-3633 custom Thermocouple with ¼" NPT process thread is utilized for Reclaimer Temperatures in the Aluminum Industry.

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Recycling equipments for non-ferrous scrap metal shredding & recycling

    Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling sorting solutions for the non-ferrous metals - post shredder

    The widespread use of electronic products has created an enormous demand for the sorting of non-ferrous metals such as copper and aluminum. To be usable, these non-ferrous metal fractions must be treated to a high degree of purity. Thanks to TOMRA’s efficient sorting technology, separating these materials from metal waste makes is worthwhile in every aspect.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Recycling sorting solutions for the ash recycling

    Incinerated municipal solids and other waste streams results in a significant amount of ash residue, which often contains valuable metals. The amount of this remnant being created globally is rapidly increasing due to legislation which prohibits landfilling and creates new incentives for incineration. TOMRA Sorting sensor-based systems allow waste management businesses to capitalize on today’s challenges whilst simultaneously enabling them to look to the future with confidence.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Recycling equipments for white goods

    Granutech Saturn Systems design and manufacture white goods shredders and systems capable of sorting the ferrous fraction from the fluff and can equip these with eddy current and other finder technology to sort aluminum, stainless, and other recoverable metals.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling sorting solutions for the zorba - shredded non-ferrous metals

    The value of Zorba – shredded non-ferrous metals originating from end-of-life vehicles or WEEE – continues to increase, as the demand for copper, nickel and brass created by modern lifestyles is on the rise. TOMRA’s sensor-based sorting technology can double the value of Zorba.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Metals separation equipments for cleaning metal pollutants for glass industry

    REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from glass.

    By Regulator-Cetrisa based in Gava, SPAIN.

  • Premium

    Products for non-ferrous metals recycling

    Machines for the dimensional reduction, cleaning and separation of metals, among them or from other non-metallic products (ex. glass, wood, plastic, etc.)

    By Guidetti Recycling Systems based in Renazzo (FE), ITALY.

  • Premium

    Industrial solutions for the carbon dioxide (CO2) lasers

    Carbon Dioxide (CO2) lasers are high power lasers, usually used for cutting of ferrous and non-ferrous metals. High-performance gas flow control is a key requirement for achieving high cutting performance with CO2 lasers. Gas flow control plays an important role for mixing key gases at a number of locations with a CO2 laser: Beam Generation: The gas mixture used as the emitting medium usually consists of CO2, He and N2. Most laser manufacturers specify a minimum required purity for the beam generation gas...

    By Axetris AG based in Kaegiswil, SWITZERLAND.

  • Magnets for the recycling industry

    Master Magnets equipment is used in many recycling applications such as the recycling of automobiles, electrical goods, skip waste, domestic waste, in fact wherever there is a need to separate metals from other materials.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Continuous Gravimetric Feeding for Coal Mining Industry

    Applications in coal mining, the processing of non-ferrous metals, costeaning and preparation in mines require technology and materials capable of withstanding the most extreme conditions. Schenck Process solutions prevail where others give up. Our products are durable, indestructible and extremely reliable under the most difficult conditions. Whether large lumps or the finest fragment, wet or dry and irrespective of whether using ore, scrap, lime powder or hot sinter up to 1,000 °C – vibratory equipment...

    By Schenck Process Group based in Sandnes, NORWAY.

  • Plazkat Systems for Treatment of emissions from ferrous and non-ferrous metal working industries

    Metal casting and heat treatment processes are associated with harmful gaseous emissions into the atmosphere which include substances such as carbon monoxide, nitrous oxides, oil vapors and sulfur dioxide.

    By Plasma Air Systems Corporation OU based in Harju Maakond, ESTONIA.

  • Recycling Solutions for the metals industry

    ANDRITZ METALS – highest quality in metalforming technology. Complete lines for the production and further processing of cold-rolled carbon steel, stainless steel, and non-ferrous metal strip. ANDRITZ METALS provides solutions for lines to produce steel and other metal strips. These lines consist of equipment for pickling, cold rolling, annealing, heat treatment, strip coating and finishing, and for pickling acid regeneration. Additionally, ANDRITZ METALS supplies turnkey industrial furnace systems for...

    By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY.

  • Shredding solutions for automotive oil filters industry

    The oil filters mounted on cars, trucks and tractors, if shredded and properly processed, can return the 97% of the materials. The components which can be recovered are oil, paper, plastics, ferrous materials and not.

    By SatrindTech Srl based in Arluno, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you