Only show results in Virginia? Ok

Pressure Cleaning Equipment

  • Premium

    Model M_one and M_10 - Vacuum Mass Comparators

    Weight Measurements with Lowest Possible Uncertainty: National Metrology Institutes improve their measurement accuracy by performing mass determination at constant pressure or vacuum. The METTLER TOLEDO M_one and M_10 are designed for various artefacts with results accurate to within 100 nanograms, whilst offering unique flexibility features.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Vac-Con - Model Hot Shot 1600 - Jet Rodders

    Standard Equipment Includes: 1600 gallon capacity polyethylene water tank. 600' capacity front mounted hose reel. 30 gpm/3000 psi water pump system. Auxiliary engine water pump drive. 400' high pressure sewer flushing hose. Hose rewind guide. Hose guide (Tiger Tail). 30' leader hose. 600 psi wash down hand gun with 25' of hose and nozzle. 1 each) ...

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA). from Sewer Flushing Product line

  • Premium

    Vac-Con - Model Hot Shot 1000 - Jet Rodders

    Standard Equipment Includes: 1000 gallon capacity polyethylene water tank. 600' capacity front mounted hose reel. 30 gpm/3000 psi water pump system. Auxiliary engine water pump drive. 400' high pressure sewer flushing hose. Hose rewind guide. Hose guide (Tiger Tail). 30' leader hose. 600 psi wash down hand gun with 25' of hose and nozzle. 1 each) ...

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA). from Sewer Flushing Product line

  • Premium

    Vac-Con - Model XX-Cavator - High-Pressure Water System

    The new Vac-Con XX-Cavator, M exceeds the requirements of the most particular excavating contractors by delivering a full 28'Hg and an awe inspiring 7000 CFM. That's not a misprint; no smoke, no mirrors, just power. It's also available with a choice of front or rear mounted boom, water systems to 4000PSI, and an option list to satisfy the demands ...

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA). from Other Products Product line

  • Premium

    Vac-Con - Hot Shot High-Pressure Water Jet Machines

    Vac-Con’s Hot Shot high-pressure water jet machines are used for removing stones, bottles, cans, grease, sludge, and other debris from sanitary sewer and/or storm drain lines by the flushing action of high-pressure water. Hot Shot machines are equipped with a noncorroding, polyethylene water tank, with all controls for high-pressure water ...

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA). from Other Products Product line

  • Premium

    WesTech CleanWash™ - Model SWP/CPS - Screw Wash Press and Counter Pressure Screw

    Unlike other screw wash presses in which the design of the discharge pipe creates the back pressure necessary to dewater screenings, WesTech's CleanWash™ Screw Wash Press and Counter Pressure Screw regulates exactly the right amount of back pressure to meet the highly variable influent. The positive conveyance of the screenings after each ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Headworks Screening Product line

  • Premium

    Sterlitech Large Sanitary Stainless Steel Holders - 90, 142, 293mm

    Sanitary connections are non-threaded and can be completely disassembled for thorough cleaning. Designed for minimal resistance and maximal flow. Available in either type 304 or 316 stainless steel. Removalbe wing nuts tighten easily by hand to seal membrane. Both inlet and outlet plates clearly marked with identifying serial number. Applications: ...

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Pressure and Vacuum Filtration Product line

  • Premium

    NIRMaster - Model Pro IP65 - FT-NIR at Highest Protection

    The NIRMaster Pro IP65 is the world’s first dedicated FT-NIR standalone spectrometer with IP65 protection class. Its hygienic design is certified to be resistant to water jet cleaning procedures. It fully meets the requirements for safety of quality control instruments used in dairy and meat food production.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND. from NIRSolutions Product line

  • Premium

    Vac-Con - Hot Shot Jet Rodders

    Vac-Con's Hot Shot high-pressure water vac jet machines are ideal for removing stones, bottles, cans, grease, sludge, and other debris from sanitary sewer and/or storm drain lines by the flushing action of high-pressure water. Hot Shot machines are equipped with a self-contained, non-corrosive, non-metallic water tank and can be operated by one ...

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA). from Sewer Flushing Product line

  • Premium

    Vac-Con X-Cavator - High-Pressure Water System

    The X-Cavator's powerful vacuum and high-pressure water system will excavate to the power of the X to get the job done right. The X-Cavator handel's your toughest and tightest excavation applications. The Xcavator enables you to locate and safely excavate around valuable utilities without damaging them. There is no application too tough for the ...

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA). from Other Products Product line

  • Premium

    Hilliard HILCO - Pleated Screen

    The pleated strainer basket contains 3.7 times the area of a plain, cylindrical basket. Features inside-out flow and can easily be cleaned by hosing off in a part washing tank, or with steam or a high-pressure water jet (car wash type).

  • Premium

    Sterlitech Sanitary In-Line Stainless Steel Holders

    Sanitary inlet and outlet connections are non-threaded and can be completely disassembled for thorough cleaning. 47 mm holder features a vent to allow air venting on upstream side of the membrane at any time during filtration. Applications: point of use filtration on sterile filling machines, flow decay studies for scale up to larger filtration ...

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Pressure and Vacuum Filtration Product line

  • Premium

    Sterlitech Stainless Steel Syringe Holders

    Use Sterlitech stainless steel syringe holders when filtering or cleaning small volumes of liquid. SS syringe filter holders are also useful when clarifying turbid solutions and purifying virus solutions.Stainless Steel Syringe Filter Holder Product Benefits: Made with 304 stainless steel Autoclavable Luer fittings Wrench set included ...

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Pressure and Vacuum Filtration Product line

  • Premium

    Sterlitech - In-Line Holders

    Sterlitech in-line pressure filtration holders are designed for use in pressure applications, either in batch or continuous filtration processes. Our polypropylene in-line holders and aerosol in-line holders are compatible with a wide-range of chemicals and temperatures, while our high pressure stainless steel in-line pressure filtration holders ...

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Filter Holders - Pressure Filter Holders Product line

  • Premium

    Sterlitech - Large Filter Holders

    Sterlitech large pressure filter holders are ideal for filtering gasses or liquids. Our large standard stainless steel pressure filter holders allow you to seal the membrane by hand with tightening and locking wing nuts. The large sanitary stainless steel large filter holders are non-threaded and can be completely disassembled for more thorough ...

    By Sterlitech Corporation based in Kent, WASHINGTON (USA). from Filter Holders - Pressure Filter Holders Product line

  • Premium

    NIVUS AquaBar - Model II - Submersible Probe

    Submersible probe – piezo-resistive stainless steel measurement cell. Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in clean to slightly polluted liquids. With piezo-resistive stainless steel measurement cell.

    By NIVUS GmbH based in Eppingen, GERMANY. from Level - Hydrostatic, Pressure Product line

  • Premium

    Grande - Model ACU-JET - Jet Regulator System

    The ACU-JET Jet Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 235 gpm (15 L/s) to a maximum of 32 000 gpm (2 000 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-JET Jet Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Flow Regulation Product line

  • Premium

    Elgin - Model ESS-SM-500 - Jet-Shear Mud Mixing Systems

    Using our unique history as a provider of performance chemicals, Elgin has developed a line of drilling fluid jet shear systems.  Jet shear systems are designed to use hydraulic shear to efficiently mix solids with liquids. Elgin’s jet shear systems ensure efficient mixing of soluble polymers and bentonite used in water-based drilling ...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Oil and Gas Products Product line

  • Premium

    ASTIM - Jet Nozzle Aeration

    The technology of jet aeration and jet mixing involves combining two fluids streams in a common mixing chamber. Astim jet nozzle aerator is designed to mix the water and the pressurized air. The efficient mixture is obtained while flowing through the special designed outlet nozzles.

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Aeration Technology - Aeration Systems Product line

  • Premium

    Macrotek - Eductor Scrubbers

    Eductors (also known as jet pump ejectors, and venturi pumps) are the most efficient way to pump or move many types of liquids and gases in the petrochemical, process, and power industries. Eductor scrubbers are widely used for tank vent control and applications where fans cannot be used.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA). from Additional Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you