Only show results in Virginia? Ok

Waste & Recycling Equipment

  • Freddy - Model KSV45 - Swarf Vacuum

    The Freddy KSV vacuum is a portable vacuum designed to pick up swarf.  The KSV/W is designed to pick up engineering coolant (suds), metal chippings and swarf (but not spirals). The KSV/C is designed to pick up metal chippings and swarf (but not spirals) where there is little or no liquid present. The KSV/W has a perforated steel basket with a ...

    By Freddy Products Ltd based in Pershore, UNITED KINGDOM. from Swarf Vacuums Product line

  • LIANYIJIUZHOU - Model TGSG - Bitumen Coated Fiberglass Geogrid for Asphalt Reinforcement

    LIANYI fiberglass geogrids are specifically warp knitted fiberglass Geogrids ideal for asphalt reinforcement. These fiberglass geogrids are coated with a bituminous material which ensures proper adhesion to the asphalt layers over the tack-coated surface. Bituminous coating further optimizes the chemical compatibility between the fiberglass ...

  • FUCHS Aerobic Digestion at 30-50°C

    Stabilization of sewage sludge is a basic requirement for agricultural use. Aerobic digestion in a separate basin is a simple and cost-effective way to increase the capacity of existing wastewater treatment plants. Sewage sludge as well as manure are stabilized and at thermophilic temperatures (> 50°C) disinfected, if required. Aeration of ...

    By Fuchs Enprotec GmbH based in Mayen, GERMANY. from Sewage Sludge Treatment Product line

  • Model XM-40 - Chute Fed Compactors

    A hydraulically operated concentric ram compactor utilizing the extrusion principle. Refuse is forced through the nose of the compactor, which contains a unique set of restrictors. The compactor body and compaction chamber are rugged and durable. They are tubular in shape, forming one continuous body of high strength 3/8' steel plate. The ram is ...

    By Compactors Incorporated based in Hilton Head Island, SOUTH CAROLINA (USA). from Chute Fed Compactors Product line

  • Model 10-T - Chute Fed Compactors - Bulkhead Compactor

    A hydraulically operated concentric ram trash compactor with hardened cast ductile iron shear teeth compacting against a heavily reinforced door with a quick opening latch. The compaction body and compaction chamber are tubular in shape and form one continuous integral body of structural 3/8' steel plate. The ram is similarly constructed of 1/4' ...

    By Compactors Incorporated based in Hilton Head Island, SOUTH CAROLINA (USA). from Chute Fed Compactors Product line

  • Model 520ESII - Chute Fed Compactors

    An industrial stationary container packer typically installed in multi-story buildings. The machines compact trash received from a trash chute and compact into two cubic yard front or rear load compaction containers. The machines operate automatically by an electric eye, providing unattended operation until the container is full at which time it ...

    By Compactors Incorporated based in Hilton Head Island, SOUTH CAROLINA (USA). from Chute Fed Compactors Product line

  • DeSite - Model SLG-78 - Portable Topsoil and Rock Screener

    The DeSite SLG-78 portable topsoil and rock screener for skidsteers, backhoes and wheel loaders up to a 3 yard bucket. OMH recognizes the need for a vibratory screener to work with small to midsize equipment.

    By OMH Innovations USA, Inc. based in Chattaroy, WASHINGTON (USA). from Screener Product line

  • Flow Cells

    Micronit’s flow cells make excellent tools to sort, count, manipulate and image cells. The dimensions of the microfluidic channels can be in the same range as cell diameters allowing single cell sorting and counting. The superior flatness allows perfect optical imaging, the thin bottom makes it suitable for confocal microscopy. Flow cells ...

    By Micronit based in PV Enschede, NETHERLANDS.

  • Mobile Units

    Self-contained unit that can easily be transported and can serve several sites decreasing the cost of having dedicated dewatering units.

    By Fagor Edergarden S.L. based in Mondragón (Guipuzcoa), SPAIN. from Sludge Dewatering Product line

  • Model Sprut-1 - Oil Kimmer System

    Oil skimmer system “Sprut-1” manufactured by the company «ECOservice-NEFTEGAZ» is designed for oil/petroleum products skimming from water surface (capacity – up to 15 m3/h).  Skimmer system «Sprut-1» allows to use interchangeable oil recovery cartridges of oil/brush-, drum- or disk-type. All ...

    By ECOservice-NEFTEGAZ Ltd based in Zhukovsky, RUSSIA. from Oil Recovery Equipment Product line

  • MICRO - Model 8”, 12 - Autoclaves

    AISI304 stainless steel external case and top. Stainless steel chamber and lid, with easy opening. INCOLOY special stainless steel heater element, which provides long life, low corrosion and high temperatures resistance. Manual air purge when starting ('MICRO 8' model). Automatic atmospheric purge ('MED 12' and 'MED 20' models). Safety device to ...

    By JP Selecta S.A. based in Abrera, SPAIN. from Autoclaves Product line

  • Vermeer - Model TG9000 - Tub Grinder

    When you need more power for your high-production grinding operation, the TG9000 is an ideal choice. The TG9000’s PT tech wet clutch with 2:1 gear reduction is controlled by a microprocesser to help protect the engine by limiting torque when necessary. The TG9000 features the largest diameter opening in the industry with an inside tub ...

    By Vermeer based in Pella, IOWA (USA). from Tub Grinders Product line

  • OPEC - Model HV - Low Capacity Oil Skimmer

    The HV System has been developed from the present well established and proven mop systems which are in operation worldwide. The equipment is simple and quick to set up and the installation of the system is also very simple. Mop changes are also very quick and easy to carry out and ready joined continuous loops of mop can easily be threaded between ...

    By Oil Pollution Environmental Control Ltd based in Birstall, Batley, UNITED KINGDOM. from Oil Pollution Recovery Product line

  • Model TN Series - Granulator Systems

    Twin Flywheel, Multi-Blade Rotor, Severe Duty Granulators

    By Rotogran International Inc. based in Ontario, ONTARIO (CANADA). from Granulator Systems Product line

  • LGR - Methane Carbon Isotope Analyser (MCIA)

    LGR’s Methane Carbon Isotope Analyser (MCIA) reports measurements of δ13CH4 and methane mixing ratio directly, continuously and without sample preparation. LGR offers three models to span the entire range of methane levels in landfills, mudlogging studies, biogas reactors, and ambient air.

  • Gradko - Neoprene Tubing

    Chloroprene: Neoprene (also known as chloroprene) is traditional rubber-type industrial tubing, which exhibits greater resistance to cracking than red rubber. It has a reasonable working temperature range and is therefore often used in low temperature environments or for the transport of high temperature liquids.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM. from Tubing Product line

  • RDP - Hybrid Evaporator

    The Hybrid Evaporator can be operated as a pasteurizer or a dryer. In both cases, biosolids are automatically loaded from a storage bin. The biosolids are processed on a batch basis. The Evaporator utilizes a rotor mounted on a stationary drum, both of which are heated using a thermal fluid. The entire assembly is mounted on load cells. When the ...

    By RDP Technologies, Inc. based in Conshohocken, PENNSYLVANIA (USA). from Biosolids Stabilization Systems Product line

  • PCB Soil Sampling Kit

    Soil Sampling Systems - PCB Soil Sampling Kit, 6/Case, #AU10293-H.

    By Rhodes Environmental, Inc. based in Houston, TEXAS (USA). from Safety - Abatement Supplies - Soil Sampling Systems Product line

  • Model RWC 1000 HS - Runway Cleaning Vehicle

    Two German companies located in Witten - BROCK Kehrtechnik GmbH and HDT Hochdrucktechnik GmbH - designed and built this high performance vehicle for professional runway and surface cleaning. The rubber deposits on the runway are removed and entirely drawn off by suction. On the vehicle, all of the essential components are hydraulically driven. The ...

    By HDT HochDruckTechnik GmbH based in Witten, GERMANY. from Runway Cleaning Vehicle Product line

  • ABBRIATA - Model M60 MINI/S - Square Balers

    The ABBRIATA M60 MINI/S square baler is characterized by a chamber with a size of  34x44 cm and a very light weight of approximately 850 kg. It has a pick-up length of 95 cm and a width spanning the entire machine, 149 cm in the transport set-up. The minimum drive power is 20 – 25 CV. This is a special square baler designed for working ...

    By ABBRIATA s.r.l. based in SEZZADIO (AL), ITALY. from Square Balers Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you