Only show results in Massachusetts? Ok

Pyrolytic and Thermal Cleaning services for Waste and Recycling

  • Thermal Chemical Processing And Cleaning

    Precision is the European leader in Thermo-Chemical cleaning processes, specialising in the removal of non water-soluble contaminants from a wide array of products and filters. Precision provides cleaning solutions, tailored to the needs of each customer. We currently clean filters used by world leaders in, but not limited to, the polymer-melt, ...

    By Precision Group based in Belfast, UNITED KINGDOM.

  • Optimally Designed Processes and Procedures

    Everything at a waste/garbage and biomass incineration plant ultimately comes down to the incineration process and the method used for scrubbing flue gases. Benefit from our expertise and decades of experience in this area. Minimize the consumption of consumables and the amount of pollutants generated, increase availability, boiler running hours ...

    By I.C.E. AG based in Wil, SWITZERLAND.

  • Thermal Cleaning Services

    Thermal cleaning is a method for removing old coatings from metal components. After cleaning and blasting, we apply a new coating to the components and they are then ready to be used again. In addition to pipeline components, printing rollers and machine components,

    By Kersten Kunststofcoating BV based in Brummen, NETHERLANDS.

  • Service, Evaluate, Upgrade, and Inspection Services

    We service, evaluate, upgrade, and inspect the following:

    By E E Group based in Lyndhurst, NEW JERSEY (USA).

  • Paint stripping and plastic removal Service

    Arena Comet Service Cleaning Shops (SCS) which are located in Belgium (Lokeren), Poland (Krakow -Wroclaw) and Czech Replublic (Prague) provide solutions for paint stripping and plastic removal or removal of all kinds of organic coatings like plastic, teflon, silicone, rubber, glue, grease, etc. Costly ...

    By Arena Comet NV based in Lokeren, BELGIUM.

  • Explosives Management

    Clean Harbors Explosives Management Services provide risk-free management of explosive and reactive wastes at one of our EPA-approved thermal treatment facilities. Quality control is of utmost importance with Clean Harbors, exceeding government requirements and eliminating the risk of costly waste rejections while guaranteeing the timely ...

    By Clean Harbors based in Norwell, MA, MASSACHUSETTS (USA). from Waste Disposal & Recycling Service line

  • Media Change-Outs Services

    Regenerative Thermal and Catalytic Oxidizers (RTOs & RCOs) will experience over years of operation reduced air flow capacity, channeling or voids in the media bed, thermal imbalances in the chambers, non-efficient energy use, and extended startup times. These are all signs of a Thermal Oxidizer that should be evaluated for media replacement.

    By Gulf Coast Environmental Systems, LLC based in Conroe, TEXAS (USA). from Onsite & Remote Service Service line

  • Processing Technologies Service

    With our partners we also offer following services: Shredding, granulating of scrap tires, Milling of rubber down to 250 Mikron, Milling of powder, Cleaning of metalls from colouring or rubber Cleaning of dioxin contaminations, Separation of components, Mechanical and thermal drying, Drying/processing of wet municipal waste, Reprocessing of old ...

    By Dipl.-Ing. (FH) Dirk Gerlach VDI based in Meinerzhagen, GERMANY.

  • Bags & Cages Services

    Filter bag technology: At Simatek, we work with the best technology in all our offerings. We have long-standing experience in filter bag technology for sanitary applications in the food and pharma industries. This includes Cleaning in Place (CIP) process filters where we meet strict requirements in design, material certification, regulations and ...

    By Simatek A/S based in Soroe, DENMARK.

  • Plant, Process and Procedural Optimization

    Increased waste throughput, optimized energy efficiency, reduced environmental impact, improved efficiency, greater operational reliability and lower labor costs: these are just some of the benefits that can be gained by optimizing plants and processes fueled by incinerating garbage, waste, biomass and sewage sludge. Our complete service offering ...

    By I.C.E. AG based in Wil, SWITZERLAND.

  • Filter Cleaning Services

    The Thermo-Clean Group offers tailored solutions for the cleaning of all types of filters. Depending on the specific type of filter we select the right cleaning technique.

    By Thermo Clean Group based in Ghislenghien, BELGIUM.

  • Plastics Remove Services

    At the instruction of companies that manufacture or process plastics, we remove plastics from technical parts. These parts get contaminated during the processing of plastics, which means they need to be cleaned at regular intervals. To do so, we use the thermal cleaning technique.

    By Thermo Clean Group based in Ghislenghien, BELGIUM.

  • Oil Flushing Of Hydraulic Pipelines Services

    Cleanliness in Hydraulic systems has received considerable attention recently. Hydraulic systems are extremely sensitive to contamination. Fluid cleanliness is of primary importance because contaminants can cause component malfunction, prevent proper valve seating, cause wear in components, and may increase the response time of servo valves and ...

    By Arudra Engineers Pvt Ltd based in Chennai, INDIA.

  • Maintenance Services

    When water in the solar heater is used up during bath, you can add cold water for some minutes to put hot water in vacuum tube out by the principle that cold water sinks and hot water floats, and the bathing is going on.

    By Tangshan Dingre Solar Energy Technology Co.,Ltd based in Luannan, Tangshan, CHINA.

  • Diesel Particulate Filters (DPF) Cleaning and Refurbishment

    Complete refurbishment of diesel particulate filters (DPF) component using specialized ultrasonic equipment and atmospheric ovens. We Professionally clean and regenerate all diesel particulate filters and catalysts on the market for all applications. You will get back your filter, not an exchange, OR previously used filter with no documentation as ...

    By DPF REGENERATION based in stratford, CONNECTICUT (USA).

  • Mobile Services

    Tri Rinse provides cleaning services of above ground storage tanks, ISO tank containers, cargo tankers, and railcars for leaders in the agricultural and chemical industries. Our mobile capabilities allow Tri Rinse to service customers in all of the continental 48 states. Strategically located in the central mid-west of the United States, Tri Rinse ...

    By TRI-Rinse, Inc. Environmental Contractors based in St. Louis, MISSOURI (USA). from Industrial Cleaning Service line

  • Schwing - Engineering Services

    Comprehensive special knowledge and proven system solutions in heat treatment and the thermal cleaning of metal parts, especially high-temperature know-how in fluidized bed process technology and the continuous improvement of the control and automation technology in regard to user comfort and environmental compatibility represent only some of the ...

    By SCHWING Technologies GmbH based in Neukirchen-Vluyn, GERMANY.

  • Air Pollution Control Equipment Design & Specification

    Air Pollution Control equipment specification for iron and steel foundry, foundry and frac sand coating, coal/biomass fired boilers, energy from waste EfW, cupola iron melting, automotive, printing, portland cement, alternative metal recovery processes. Process engineering of gas cleaning systems from thermal & combustion sources including ...

    By Environmental Process Engineering & Compliance LLC based in Greendale, WISCONSIN (USA).

  • Mold Remediation

    Gerken Environmental has been providing mold remediation services for our commercial and industrial clients since 1999. In addition to mold remediation activities, Gerken Environmental provides additional biological services such as pigeon guano removal, bat guano removal, medical clean room remediation and infectious control remediation.

    By Gerken Environmental Enterprises, Inc. based in Springfield, MISSOURI (USA).

  • Rubber Removal Services

    Thermo-Clean is also in the business of removing rubber – including PU, butyl, etc. – from contaminated parts. These parts include anything from ventilator wheels and pipelines to shock absorbers. We have all the appropriate installations to handle the thermal cleaning of parts up to ten metres in length. Even if the protective rubber ...

    By Thermo Clean Group based in Ghislenghien, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you